1. Introduction
This manual provides detailed instructions for the installation, setup, operation, and maintenance of your YRHAND Tuya App Biometric Fingerprint Cabinet Lock. This smart lock offers keyless entry via fingerprint recognition and Tuya app control, enhancing security for your drawers, cabinets, and lockers.
2. Package Contents
Please verify that all components are present in your package:
- Front Panel (Fingerprint Reader)
- Back Panel (Battery Box and Lock Mechanism)
- Lock Latch
- Screw Bag (containing necessary screws)
- USB Cable (for emergency power)

3. Specifications
| Feature | Description |
|---|---|
| Model Number | 1667-5 |
| Brand Name | YRHAND |
| Material | Zinc Alloy, ABS |
| Color | Black |
| Ways To Unlock | Fingerprint, Tuya App (Bluetooth) |
| Fingerprint Capacity | 20 fingerprints |
| Response Time | 0.5 seconds |
| Power Supply | 3 x AAA Dry Batteries (not included) |
| Standby Time | Up to 1 year (approx. 365 days) |
| Emergency Power | Type-C USB interface for power bank |
| Protection Level | No Waterproof |
| Suitable Door Type | Steel Door, Wooden Door, Glass Door, Brass Door, Stainless Steel Door, Cabinet, Office, Home |
| Suitable for Mortise | Other |
| Handle Direction | Direction Reversible |
| Finish Type | Brushed |
| Smart Home Platform | Tuya |
| Certification | CE, FCC |

4. Installation
The YRHAND Fingerprint Cabinet Lock is designed for easy installation on most drawers and wardrobes. Ensure the cabinet panel thickness is over 16mm.
4.1 Tools Required
- Drill with a 15mm drill bit
- Screwdriver
- Pencil or marker
4.2 Installation Steps
- Drill Hole: Drill a hole with a diameter of 15mm on the desired cabinet or drawer panel. Ensure the panel thickness is over 16mm.
- Install Front Panel: Pass the cable from the front panel through the drilled hole from the outside of the cabinet/drawer.
- Secure Front Panel Cable: From the inside of the cabinet/drawer, pass the front panel cable through the fixing plate.
- Fix Front Panel: Secure the fixing plate with screws to hold the front panel in place.
- Connect Panels: Plug the front panel cable into the connection port of the rear panel.
- Position Rear Panel: Remove the battery cover from the rear panel. Place the lock latch above the latch mechanism on the rear panel. Adjust and determine the optimal position for the rear panel, ensuring the position of the lock latch is close to the level of the drawer door for proper locking.
- Fix Rear Panel: Fix the rear panel to the cabinet/drawer with screws.
- Install Batteries: Install 3 AAA batteries (not included) into the battery compartment of the rear panel.
- Close Battery Cover: Put the battery cover back on.
- Secure Lock Latch: Confirm the final location of the lock latch. You can temporarily fix the lock latch with a sticker first to ensure correct alignment, then permanently fix it with 2 screws.

5. Setup
5.1 Tuya App Setup
- Download the Tuya Smart or Smart Life app from your device's app store.
- Register or log in to your account.
- Open the app and follow the instructions to add a new device. The lock uses Bluetooth for initial pairing.
- Once paired, you can manage users, add/delete fingerprints, and check unlock records through the app.
- To enable remote unlocking from anywhere, connect the lock to a compatible Tuya gateway (sold separately).


5.2 Fingerprint Registration
You can register up to 20 fingerprints. The first two registered fingerprints are typically administrator fingerprints.
- Open the Tuya app and navigate to the lock's settings.
- Select the option to 'Add Fingerprint'.
- Follow the on-screen prompts to place your finger on the fingerprint reader multiple times until registration is complete.
- Repeat for all desired fingerprints.
5.3 Emergency Password Setup (for factory reset)
This feature allows you to restore factory settings using a specific sequence. Refer to the manual for more setup information.
- Unlock and Hold: Use a recorded fingerprint to unlock the device. Immediately after unlocking, press and hold your finger on the sensor until the blue light is on, then the white light is on. Release your finger, then the green light will turn on.
- Set First Password: Press the fingerprint sensor once and count the number of times you want for the first digit of your password (e.g., 5 times for '5'). Wait for the blue light to light up.
- Set Second Password: Repeat the previous step to set the second digit of your password.
- Confirmation: The light will turn off, indicating that the emergency password setting is successful.

6. Operation
6.1 Unlocking with Fingerprint
Place a registered finger on the fingerprint reader. The lock will recognize your fingerprint in approximately 0.5 seconds and unlock.

6.2 Unlocking with Tuya App
Open the Tuya app on your smartphone. Navigate to the lock interface and swipe right to unlock. If connected to a gateway, you can unlock remotely.

6.3 Low Battery Alert
When the battery is low, the lock will indicate this during unlocking:
- Normal Unlock: Green light flashes once.
- Low Battery Warning: Red light flashes three times, indicating it's time to replace the batteries.
- Unlocked: Green light stays on.

6.4 Emergency Power Supply
If the batteries are completely dead and the lock cannot be unlocked, you can use a power bank for temporary external power supply. Connect a Type-C USB cable from a power bank to the lock's charging port. Once powered, you can unlock the device using a registered fingerprint or the app. After unlocking, immediately replace the internal AAA batteries.

7. Maintenance
7.1 Battery Replacement
The lock uses 3 AAA batteries. When the low battery alert is triggered (red light flashes three times upon unlocking), replace all three batteries promptly. Ensure correct polarity when inserting new batteries.
7.2 Cleaning
Wipe the fingerprint sensor and the lock's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish or electronic components.
8. Troubleshooting
- Lock not responding: Check battery levels. If batteries are dead, use emergency power supply.
- Fingerprint not recognized: Ensure your finger is clean and dry. Try re-registering your fingerprint through the app. Ensure you are using a registered fingerprint.
- App connectivity issues: Ensure Bluetooth is enabled on your phone and you are within range of the lock. If using a gateway for remote access, ensure the gateway is properly configured and connected to the internet.
- Cannot open after installation: Double-check that the lock latch is correctly aligned and not obstructed. Ensure the front and rear panels are securely connected.
- Accidental factory reset: If the lock unexpectedly resets, you will need to re-register all fingerprints and re-pair with the Tuya app.
9. User Tips
- For optimal performance, ensure the fingerprint sensor is clean before use.
- Register multiple fingers for convenience and as a backup.
- Consider purchasing a Tuya gateway for enhanced remote control and monitoring capabilities.
- Always have a power bank readily available for emergency power supply in case of dead batteries.
- When installing, use the provided screws for a secure fit. Some users find it helpful to mark the screw positions before drilling.
10. Warranty and Support
The YRHAND Fingerprint Cabinet Lock comes with a 24-month manufacturer's limited warranty for defective items, excluding items damaged by misuse or improper handling. For technical support or warranty claims, please contact your retailer or the manufacturer directly.
For more information, you may refer to the official YRHAND website or contact customer service.