1. Introduction
Thank you for choosing the UGREEN 30W 10000mAh Power Bank. This portable charger is designed to provide fast and efficient power to your devices on the go. Featuring a large capacity, intelligent LED digital display, and multiple safety protections, it ensures a reliable charging experience. Please read this manual carefully before use to ensure proper operation and to maximize the lifespan of your device.

2. Safety Information
To ensure safe and optimal performance, please observe the following safety guidelines:
- Do not expose the power bank to extreme temperatures (above 60°C/140°F or below 0°C/32°F), direct sunlight, or fire.
- Do not disassemble, modify, or attempt to repair the device.
- Keep away from water, moisture, and corrosive materials.
- Do not drop, hit, or subject the power bank to strong impacts.
- Keep out of reach of children.
- Dispose of the power bank according to local regulations; do not dispose of it in household waste.
- Avoid charging devices that exceed the power bank's output specifications.
- The power bank features advanced temperature control technology (200 times/s) to prevent overheating and protect battery health.

3. Package Contents
- UGREEN 30W 10000mAh Power Bank (Model PB535)
- User Manual
- (Charging cable may be included, check product packaging)
4. Specifications
| Feature | Specification |
|---|---|
| Product Model | PB535 |
| Dimensions | 145 x 67 x 17 mm |
| Battery Capacity | 10000mAh |
| Rated Capacity | 6600mAh |
| Max Output | 30W |
| Shell Material | Plastic |
| Quick Charge Technology | Two-way Quick Charge (PD3.0, UFCS, PPS, QC, SCP, FCP, AFC) |
| Input Interface | USB Type C (30W Max) |
| Output Interfaces | USB-C1 (30W Max), USB-C2 (30W Max), USB-A (33W Max) |
| Battery Type | Lithium Polymer Battery |
| Features | LED Digital Display, Temperature Control Protection, Lightweight Design |
| Certifications | CE, UKCA, CCC, PSE, FCC |


5. Setup and Charging
5.1 Charging the Power Bank
- Connect a USB-C charging cable to one of the USB-C input/output ports (USB-C1 or USB-C2) on the power bank.
- Connect the other end of the cable to a compatible USB wall charger (a 30W or higher PD charger is recommended for fastest charging).
- The LED digital display will show the charging progress. A full charge from empty takes approximately 120 minutes with a 30W charger.

5.2 Charging Your Devices
- Connect your device's charging cable to one of the output ports on the power bank (USB-C1, USB-C2, or USB-A).
- Connect the other end of the cable to your device.
- The power bank will automatically begin charging your device. The LED display will show the remaining battery percentage.
- For optimal fast charging, use a single output port. Simultaneous charging of multiple devices may disable the fast charging function.

6. Operating Instructions
6.1 LED Digital Display
The intelligent LED digital display shows the precise remaining battery percentage of the power bank, allowing you to monitor power levels at a glance.

6.2 Small Current Mode
This mode is designed for charging low-power devices such as Bluetooth headsets, smartwatches, electric toothbrushes, and small fans, preventing overcharging and potential damage.
- To Enter Small Current Mode: Long press the power button for approximately 3 seconds.
- To Exit Small Current Mode: Long press the power button again for approximately 3 seconds, or the mode will automatically exit after 2 hours.

7. Maintenance
- Clean the power bank with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
- Store the power bank in a cool, dry place when not in use.
- If the power bank will not be used for an extended period, charge it to about 50-75% every three months to maintain battery health.
- Avoid fully discharging the power bank frequently, as this can reduce its overall lifespan.
8. Troubleshooting
- Power bank not charging: Ensure the charging cable and wall adapter are functioning correctly and properly connected. Try a different cable or adapter.
- Device not charging from power bank: Check if the power bank has sufficient charge. Ensure the cable connecting your device is securely plugged in and undamaged. Try a different cable or port.
- Slow charging: Ensure your device and cable support fast charging protocols. If charging multiple devices simultaneously, fast charging may be disabled.
- LED display not working: If the display is unresponsive, try charging the power bank for a few minutes. If the issue persists, contact customer support.
9. User Tips
- For optimal charging speed, use a single port when charging a fast-charge compatible device.
- Utilize the small current mode for sensitive electronics like smartwatches and Bluetooth earbuds to prevent potential damage from excessive current.
- Always check the LED digital display to know the exact remaining power, avoiding unexpected power depletion.
- The power bank is safe for air travel, making it a convenient companion for flights.

10. Certifications
The UGREEN 30W 10000mAh Power Bank complies with various international safety and quality standards, including:
- CE Certification (European Union)
- UKCA Certification (United Kingdom)
- CCC Certification (China)
- PSE Certification (Japan)
- FCC Certification (The United States)

11. Warranty and Support
UGREEN products come with a standard warranty. For detailed warranty information, technical support, or any questions regarding your product, please contact UGREEN customer service through their official website or the retailer where you purchased the product. Please have your product model (PB535) and purchase details ready when contacting support.