Flipsky Dual Mini FSESC6.7 Pro

Contents

Flipsky Dual Mini FSESC6.7 Pro User Manual

Model: Dual Mini FSESC6.7 Pro

Brand: Flipsky

1. Introduction

The Flipsky Dual Mini FSESC6.7 Pro is an advanced Electronic Speed Controller (ESC) designed for electric skateboards and similar high-performance electric vehicles. Based on the VESC6.6 architecture, this dual ESC offers robust power delivery, precise control, and comprehensive protection features. It supports a wide voltage range and various control modes, making it a versatile choice for DIY enthusiasts and professional builders.

Flipsky Dual Mini FSESC6.7 Pro with dimensions

Image: The Flipsky Dual Mini FSESC6.7 Pro, showing its compact dimensions of 79.8mm x 66.8mm x 17.8mm (including heatsink).

2. What's in the Box

Please check the package contents upon receipt to ensure all items are present and undamaged:

  • 1 x Flipsky Dual Mini FSESC6.7 Pro
  • 1 x USB Cable
  • 2 x Sensor Cables
  • 1 x User Manual (refer to this document)
Contents of the Flipsky Dual Mini FSESC6.7 Pro package

Image: The package contents, including the Dual Mini FSESC6.7 Pro, USB cable, and sensor cables.

3. Specifications

Parameter Value
Firmware Latest Version
Continuous Current Single 70A, Dual 140A
Instantaneous Current Single 200A, Dual 400A
Voltage Range 14V-60V (4-13S LiPo, safe for 4S to 12S; voltage spikes must not exceed 60V)
BEC Output 5V@1A
ERPM 150000
Control Interface Ports USB, CAN, UART
Supported Sensors ABI, HALL, AS5047, AS5048A
Input Set Support PPM, ADC, NRF, UART, SPI, IIC (for IMU)
Control Modes DC, BLDC, FOC (sinusoidal)
Regenerative Capacity Yes
Programmable Yes
Motor Wire Gauge 12AWG
Power Cable Gauge 14AWG (with XT90 connector)
Dimensions (L x W x H) 79.8 x 66.8 x 17.8 mm (Including heatsink)
Material Metal (with Aluminum Anodized Heat Sink)
Waterproof Level IP67 (with water cooling enclosure)

4. Features

  • Multiple Control Modes: Supports Current, Dutycycle, Speed, and Position control modes for versatile application.
  • Comprehensive Protection Functions: Includes low voltage protection, high voltage protection, over-current protection, abnormal temperature protection, and MOSFETs over-temperature protection to ensure safe operation and longevity of the device.
  • IMU Module Support: Capable of balancing car functionality by connecting an IMU (Inertial Measurement Unit) module via the IIC interface. Compatible with popular IMU modules such as MPU9250, MPU9150, MPU6050, LSM6DS3, and BMI160.
  • Aluminum Anodized Heat Sink: Integrated heat sink for efficient thermal management, allowing for sustained high-current operation.
  • High ERPM: Supports up to 150,000 electrical RPM for high-speed motor applications.

5. Safety Instructions

Please read and understand all safety instructions before operating the Flipsky Dual Mini FSESC6.7 Pro. Failure to follow these instructions may result in property damage, personal injury, or death.

  • High Voltage Warning: This device operates at high voltages (up to 60V). Always disconnect the power source before making any connections or adjustments.
  • Electrical Safety: Ensure all wiring is correctly connected and insulated. Incorrect wiring can cause short circuits, damage to the ESC, or fire.
  • Battery Safety: Use only compatible batteries (4S-12S LiPo recommended). Do not overcharge, over-discharge, or short-circuit batteries.
  • Heat Management: The ESC can generate significant heat during operation. Ensure adequate airflow or cooling, especially during high-load applications. The integrated heatsink helps, but additional cooling may be necessary depending on usage.
  • Environmental Conditions: While rated IP67 with a water cooling enclosure, avoid exposing the ESC to excessive moisture or extreme temperatures without proper protection.
  • Professional Installation: If you are unsure about any aspect of installation or configuration, seek assistance from an experienced professional.

6. Setup

6.1. Physical Installation

Mount the Dual Mini FSESC6.7 Pro securely in your electric vehicle. Ensure it is protected from physical impact and has sufficient space for air circulation around the heatsink. The dimensions are 79.8mm x 66.8mm x 17.8mm (including heatsink).

6.2. Wiring Diagram

Refer to the diagram below for proper connection of the ESC to your battery, motors, and receiver. Ensure all connections are firm and correctly polarized.

Wiring diagram for Flipsky Dual Mini FSESC6.7 Pro

Image: Wiring diagram showing connections for Battery, Receiver (GND, 5V, SIN), and two Motors. The diagram indicates specific pin numbers for receiver connections (1-5) and motor phase wires (A1, B1, C1 for Motor 1; A2, B2, C2 for Motor 2).

  • Battery Connection: Connect your 4S-12S LiPo battery to the main power input (red and black wires with XT90 connector).
  • Motor Connections: Connect the three phase wires from each motor to the corresponding A, B, C terminals on the ESC.
  • Receiver Connection: Connect the receiver's signal (SIN), 5V, and Ground (GND) wires to the designated pins on the ESC.

6.3. Port Descriptions

The FSESC6.7 Pro features various ports for configuration and sensor input. Understand each port's function before connecting peripherals.

Pinout diagram for Flipsky Dual Mini FSESC6.7 Pro ports

Image: Pinout diagram detailing the connections for SWD, COMM, CAN, USB, and SENSE ports for both ESC units (1 and 2).

  • SWD (1 & 6): Used for firmware flashing and debugging. Pins include 3.3V, SWCLK, GND, SWDIO, NRST.
  • COMM (2 & 7): Communication port for various inputs. Pins include ADC3, ADC2, TX/SCL, RX/SDA, ADC1, GND, 3.3V, 5V.
  • CAN (3 & 8): CAN bus interface for inter-ESC communication or external devices. Pins include CAL, CAH, 5V.
  • USB (4 & 9): Micro USB port for connecting to a computer for configuration via VESC Tool.
  • SENSE (5 & 10): Sensor port for Hall sensors or other motor feedback. Pins include H3, H2, H1, TMP, 5V.

7. Operating Instructions

Once the ESC is correctly wired and configured using the VESC Tool software (available from VESC Project), you can begin operation. The FSESC6.7 Pro supports the following control modes:

  • Current Control Mode: Direct control over motor current.
  • Dutycycle Control Mode: Controls the motor by setting the PWM duty cycle.
  • Speed Control Mode: Maintains a target motor speed (RPM).
  • Position Control Mode: Controls the motor to a specific angular position.

Select the appropriate control mode and configure parameters through the VESC Tool based on your application and motor type (DC, BLDC, FOC). Always perform initial tests at low power and in a safe environment.

8. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your Flipsky Dual Mini FSESC6.7 Pro:

  • Visual Inspection: Periodically check for any loose connections, damaged wires, or signs of overheating (discoloration on components).
  • Cleaning: Keep the ESC free from dust, dirt, and debris. Use compressed air or a soft brush to clean the heatsink fins.
  • Firmware Updates: Check the official Flipsky or VESC Project website for the latest firmware updates. Updating firmware can improve performance and add new features.
  • Thermal Management: Ensure the heatsink is not obstructed and that there is adequate airflow, especially during demanding use.

9. Troubleshooting

If you encounter issues with your FSESC6.7 Pro, consider the following common problems and solutions:

  • No Power:
    • Check battery connections and ensure the battery is charged.
    • Verify the main power switch (if applicable) is on.
  • Motor Not Spinning/Irregular Operation:
    • Ensure motor phase wires are correctly connected.
    • Check sensor cable connections if using sensored motors.
    • Verify motor detection and configuration in VESC Tool.
    • Check for error codes in VESC Tool (e.g., DRV errors).
  • Overheating:
    • Reduce load or continuous current.
    • Improve airflow around the ESC.
    • Check motor and battery for issues that might cause excessive current draw.
  • ESC Shuts Down Unexpectedly:
    • This could be due to protection functions (low voltage, high voltage, over-current, over-temperature). Check your battery voltage, current draw, and ESC temperature.
    • Review VESC Tool logs for fault codes.
  • Communication Issues (USB/CAN/UART):
    • Ensure cables are securely connected.
    • Verify correct drivers are installed for USB.
    • Check baud rates and settings for UART/CAN communication.

10. User Tips

While no specific user tips were available from reviews or Q&A, here are some general recommendations for optimizing your experience with the Flipsky Dual Mini FSESC6.7 Pro:

  • Start with Default Settings: When first setting up, use the VESC Tool's motor detection wizard and start with conservative settings. Gradually increase parameters as you become familiar with the ESC's behavior and your motor's capabilities.
  • Monitor Temperatures: Especially during initial runs or high-performance usage, monitor the ESC temperature. If it consistently runs hot, consider additional cooling solutions or reducing load.
  • Secure All Connections: Vibrations from electric skateboards can loosen connections over time. Use thread locker on screws and secure all wire connections with zip ties or electrical tape to prevent accidental disconnections.
  • Regular Software Backups: Before making significant changes in the VESC Tool, save your current configuration settings. This allows you to revert to a known working state if issues arise.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.