SUMRY ECO LV 3.6KW

Contents

Sumry 3.6kw Hybrid Solar Inverter User Manual

Model: ECO LV 3.6KW (MPS-VIII ECO Series)

1. Introduction and Overview

The Sumry 3.6kw Hybrid Solar Inverter is a versatile on/off-grid pure sine wave inverter designed to provide uninterruptible power support. It integrates the functions of a solar charger, AC charger, and inverter into a single unit, featuring a built-in 120A MPPT solar charge controller. This inverter is engineered for high efficiency and reliability, ensuring clean and stable power for sensitive appliances.

Key Features:

  • Pure sine wave solar inverter (on/off Grid)
  • Output power factor 1.0
  • WIFI & GPRS available for iOS and Android monitoring (optional module required)
  • Inverter can run without battery
  • One-key restoration to factory settings
  • Built-in Lithium battery automatic activation
  • AC output voltage 120VAC
  • Built-in 120A MPPT Solar charge: max 4200W (for 3.6kW model)
  • High PV input voltage range (60~500VDC)
  • Built-in anti-dust kit for harsh environments
  • Smart battery charge design to optimize battery life
  • Dual output capability
Sumry 3.6kw Hybrid Solar Inverter front view with key specifications
Figure 1: Sumry 3.6kw Hybrid Solar Inverter (MPS-VIII ECO Series) highlighting key specifications.

2. Safety Information

Please read all instructions and warnings carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or severe injury. Keep this manual for future reference.

General Safety Precautions:

  • Ensure all wiring is performed by qualified personnel.
  • Always disconnect power before performing any maintenance or wiring.
  • Do not operate the inverter if it is damaged or appears to be malfunctioning.
  • Ensure adequate ventilation around the inverter to prevent overheating.
  • Keep flammable materials away from the inverter.
  • This inverter is designed for indoor use in a controlled environment.

Built-in Protections:

The inverter includes multi-functional safety protections for reliable and stable operation:

  • Overload Protection
  • Short Circuit Protection
  • Battery Protection
  • Overheating Protection
  • Overcurrent Protection
  • High/Low Voltage Protection
All-round protection features of the inverter
Figure 2: Inverter protection features including overload, short circuit, battery, overheating, overcurrent, and high/low voltage protection.

3. Setup and Installation

Proper installation is critical for the safe and efficient operation of your solar inverter. It is recommended to install appropriate circuit breakers at key points in the system.

Installation Steps:

  1. Battery Connection: Install a circuit breaker between the battery and the inverter. After successful installation, open the breaker. Connect the 24V battery to the inverter. Close the circuit breaker and measure the voltage on the battery side of the inverter to ensure it is correct.

  2. PV Input Connection: Install a circuit breaker between the PV input (solar panels) and the inverter. Turn on this circuit breaker after successful installation. Ensure the battery voltage is normal. Allow the inverter to connect to solar energy. Close the circuit breaker between the PV input and the inverter. The inverter display should automatically light up and begin charging. Press the button on the bottom right corner of the inverter to start the machine. Verify that there is 110V or 120V voltage output from the inverter.

  3. AC Input and Output Connections: Install a circuit breaker between the AC input (utility/generator) and the inverter. Also, install a circuit breaker between the inverter's output and your loads. After successful installation, turn on the AC input and output circuit breakers. Connect the inverter to the mains. After 2 minutes, turn off the mains input circuit breaker, and then turn off the circuit breaker of the inverter's output. This completes the installation procedure.

Circuit Breaker Specifications:

For the Sumry ECO LV 3.6KW (3600W) inverter, the following circuit breaker specifications are recommended:

  • Between Battery and Inverter: 2P100A circuit breaker
  • Between Photovoltaic (PV) Input and Inverter: 2P20A circuit breaker
  • Between Utility Input and Inverter: 2P50A circuit breaker
  • On Inverter Output: 2P30A circuit breaker
Circuit breaker specification diagram
Figure 3: Recommended circuit breaker specifications for the Sumry 3.6KW inverter.
Wiring and technical specifications diagram
Figure 4: Comprehensive wiring diagram showing connections for solar panels, generator/mains, battery, and home appliances.
Installation knowledge diagram with circuit protector placement
Figure 5: Installation knowledge diagram illustrating the placement of circuit protectors in the system.

4. Operating Instructions

The Sumry inverter offers flexible operating modes and monitoring capabilities to suit various energy needs.

Working Modes:

The inverter allows customization of power input and output priorities through user-configurable settings:

  • 4 Charging Modes:
    • Only Solar
    • Mains First
    • Solar First
    • Mains & Solar (Hybrid Charge)
  • 3 Output Modes:
    • Solar First
    • Utility First
    • SBU First (Solar-Battery-Utility)
Sectional Charging/Output source priority diagram
Figure 6: Diagram illustrating the various charging and output priority modes.

LCD Display and Controls:

The inverter features a comprehensive LCD display and easy-to-access buttons for user configuration. You can adjust settings such as battery charging current, AC/solar charger priority, and acceptable input voltage based on your application requirements.

Monitoring and Communication:

The inverter supports remote monitoring and control via the SmartESS App (iOS and Android) when equipped with an optional WIFI/GPRS module. This module connects to the RS232 communication port. For lithium battery BMS communication, the RS485 port is used, requiring compatibility with PACE or PYLONTECH communication protocols.

Monitor and control via SmartESS App with optional WIFI/GPRS module
Figure 7: Remote monitoring and control via the SmartESS App using an optional WIFI/GPRS module.
RS485 communication line for lithium battery BMS
Figure 8: Diagram showing the RS485 communication port for lithium battery BMS connection.

Battery Compatibility:

The Sumry inverter is compatible with a wide range of battery types, including:

  • Lithium batteries
  • Gel batteries
  • LiFePO4 batteries
  • Lead-acid batteries
  • AGM batteries
  • And other user-defined battery types.
Inverter compatible with various battery types
Figure 9: Inverter compatibility with different battery chemistries.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Sumry Hybrid Solar Inverter.

Cleaning and Ventilation:

  • Keep the inverter clean and free from dust. The built-in anti-dust kit helps, but periodic cleaning of vents is recommended.
  • Ensure the intelligent cooling fans are not obstructed. The inverter's sensor chip intelligently adjusts fan speed based on ambient temperature to maintain optimal operating conditions.
  • Maintain clear space around the inverter for proper airflow.
Intelligent cooling fan system of the inverter
Figure 10: Intelligent cooling fan system, which adjusts speed based on temperature.

Connection Checks:

  • Periodically check all electrical connections (PV, battery, AC input, AC output) to ensure they are secure and free from corrosion.
  • Inspect wiring for any signs of wear or damage.

6. Troubleshooting

This section provides guidance on common issues you might encounter. For complex problems, please contact customer support.

Common Issues and Solutions:

Problem Possible Cause Solution
Inverter not turning on No battery power, battery breaker open, PV input too low, inverter switch off. Check battery connections and voltage. Ensure battery circuit breaker is closed. Verify PV input voltage is within range. Press the inverter start button.
No AC output Overload, short circuit, battery low, output breaker open. Reduce load. Check for short circuits. Recharge/replace battery. Ensure output circuit breaker is closed.
Overheating warning Insufficient ventilation, blocked fans, high ambient temperature. Ensure clear space around inverter. Clean fan vents. Relocate inverter to a cooler area if possible.
Inconsistent charging PV input issues, battery connection problems, incorrect charging mode. Check solar panel connections and output. Verify battery connections. Review and adjust charging mode settings on the LCD.

7. Specifications

Detailed technical specifications for the Sumry ECO LV 3.6KW Hybrid Solar Inverter.

Product Data Sheet for Sumry ECO LV 3.6KW and 6.2KW PLUS
Figure 11: Product Data Sheet detailing specifications for the ECO LV series.

General Specifications (ECO LV 3.6KW):

  • Model Number: ECO LV 3.6KW
  • Output Type: SINGLE
  • Output Current: 20A
  • Output Frequency: 50/60HZ
  • Nominal DC Voltage: 24VDC
  • Max. AC Charging Current: 120A
  • PV DC Voltage Range: 60-450VDC
  • Max PV Input Power: 4200W
  • Peak Power: 7200W
  • Dimensions (L*W*H): 50*41.5*18cm
  • Weight: 10KG
  • Certification: CE
  • Origin: Mainland China

8. User Tips

Here are some practical tips to enhance your experience with the Sumry Hybrid Solar Inverter:

  • Battery Selection: Always choose a battery type compatible with the inverter and configure the settings accordingly for optimal charging and discharge cycles.
  • Ventilation is Key: Ensure the inverter is installed in a well-ventilated area. Good airflow prevents overheating and prolongs the life of the unit.
  • Monitor Performance: Utilize the optional WIFI/GPRS module and SmartESS App to remotely monitor your system's performance, battery status, and energy production. This helps in proactive management and troubleshooting.
  • Regular Checks: Periodically check all cable connections for tightness and signs of wear. Loose connections can lead to power loss or safety hazards.
  • Understand Your Loads: Be aware of the power consumption of your appliances to avoid overloading the inverter, especially during peak power demands.

9. Warranty and Support

The Sumry 3.6kw Hybrid Solar Inverter comes with a 1-year warranty, ensuring peace of mind regarding product quality and performance.

Warranty Information:

This product is covered by a 1-year manufacturer's warranty from the date of purchase. The warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Technical Support:

For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact your authorized Sumry dealer or the seller from whom you purchased the product. When contacting support, please have your product model number and purchase details ready.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.