Banggood J23

Contents

J23 Bluetooth Audio Transmitter Receiver 2-in-1 Wireless Audio Adapter User Manual

Model: J23 | Brand: Banggood

1. Product Overview

The J23 is a versatile 2-in-1 Bluetooth 5.0 audio adapter that functions as both a transmitter (TX) and a receiver (RX). It allows you to wirelessly stream audio from non-Bluetooth devices to Bluetooth headphones/speakers, or from Bluetooth-enabled devices to non-Bluetooth audio systems.

J23 Bluetooth 2-in-1 Adapter

Figure 1: J23 Bluetooth Transmitter and Receiver 2-in-1 Adapter

Package Contents:

  • 1x J23 Bluetooth Receiver & Transmitter
  • 1x User Manual
  • 1x AUX Cable
  • 1x USB Cable (Type-C for charging)

Component Identification:

J23 Easy Button Control Diagram

Figure 2: Easy Button Control and Port Layout

  • Multifunction Button (MFB): Power ON/OFF, Play/Pause, Answer/End Call.
  • Indicator Light: Shows device status (pairing, connected, charging).
  • Microphone: For hands-free calling.
  • AUX Port: 3.5mm audio input/output.
  • Previous/Volume - Button: Short press for previous track, long press for volume down.
  • Next/Volume + Button: Short press for next track, long press for volume up.
  • RX/TX/OFF Switch: Selects Receiver mode, Transmitter mode, or powers off the device.
  • Recharge Port: Type-C charging port.

2. Setup and Charging

Initial Charging:

Before first use, fully charge the J23 adapter. Connect the provided USB cable to the Type-C recharge port on the device and the other end to a standard USB power source (e.g., computer USB port, USB wall adapter).

J23 Type-C Charging

Figure 3: Type-C Charging Port

Powering On/Off:

  • To power on, slide the RX/TX/OFF switch to either 'RX' or 'TX' position.
  • To power off, slide the RX/TX/OFF switch to the 'OFF' position.

3. Operating Modes

3.1. Bluetooth Receiver (RX) Mode

In RX mode, the J23 receives audio wirelessly from your Bluetooth-enabled devices (e.g., smartphone, tablet, PC) and outputs it to non-Bluetooth audio systems (e.g., wired headphones, car stereo, home speakers).

J23 Bluetooth Receiver RX Mode Diagram

Figure 4: Bluetooth Receiver (RX) Mode Connections

Steps to use RX Mode:

  1. Slide the switch to the RX side.
  2. On your Bluetooth device (e.g., smartphone), search for and connect to "J23" in the Bluetooth settings.
  3. Plug the J23 adapter into the AUX port of your non-Bluetooth audio device (e.g., car stereo, wired headphones, speaker) using the provided AUX cable.
  4. Enjoy your music wirelessly from your Bluetooth device through the connected audio system.
4 Steps to use RX Mode

Figure 5: Step-by-step guide for RX Mode

Hands-free Calling (RX Mode):

The J23 features a built-in microphone with noise cancellation for clear hands-free phone calls when connected to your smartphone in RX mode.

J23 Clear Hands-free Calling

Figure 6: Hands-free calling with built-in microphone

  • Answer/Recall: Short press the MFB.
  • Reject/Hang up: Long press the MFB.

Voice Navigation (RX Mode):

When connected to your smart device via Bluetooth in RX mode, the J23 can broadcast navigation instructions through your car stereo or connected speakers.

J23 Voice Navigation

Figure 7: Voice navigation feature in RX mode

3.2. Bluetooth Transmitter (TX) Mode

In TX mode, the J23 transmits audio wirelessly from non-Bluetooth devices (e.g., TV, computer, MP3/MP4 player) to your Bluetooth headphones or speakers.

J23 Bluetooth Transmitter TX Mode Diagram

Figure 8: Bluetooth Transmitter (TX) Mode Connections

Steps to use TX Mode:

  1. Slide the switch to the TX side.
  2. Turn on your Bluetooth receiving device (e.g., Bluetooth headphones, speaker); it will automatically enter pairing mode.
  3. Plug the J23 adapter into the AUX port of your audio source device (e.g., TV, computer, MP3/MP4 player) using the provided AUX cable.
  4. The J23 will automatically pair with your Bluetooth receiving device. Enjoy your audio wirelessly.
4 Steps to use TX Mode

Figure 9: Step-by-step guide for TX Mode

Multipoint Connection (TX Mode):

The J23 supports connecting to two Bluetooth receiving devices simultaneously in TX mode. Pair them one by one.

J23 Multipoint Connection

Figure 10: Multipoint connection for two headphones to one audio source

Dual Pairing (RX Mode):

The J23 can also easily pair with two devices at the same time in RX mode. Pair them one by one.

J23 Dual Pairing

Figure 11: Dual pairing with two smartphones in RX mode

4. Maintenance

To ensure the longevity and optimal performance of your J23 Bluetooth adapter, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the device. Avoid using harsh chemicals or abrasive materials.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Water Exposure: The device is not waterproof. Avoid exposure to water or excessive moisture.
  • Charging: Use only the provided USB cable for charging. Do not attempt to open or replace the internal battery.

5. Troubleshooting

  • Device not powering on: Ensure the battery is charged. Connect the device to a power source using the USB cable.
  • Cannot pair with a device:
    • Ensure the J23 is in the correct mode (RX for receiving, TX for transmitting).
    • Make sure the J23 is within the 10-meter Bluetooth range of the other device.
    • Turn off and on both the J23 and the pairing device.
    • Clear previous Bluetooth connections on your device and try pairing again.
  • No audio output/input:
    • Check if the AUX cable is securely connected to both the J23 and the audio device.
    • Ensure the volume on both the J23 and the connected audio device is turned up.
    • Verify the J23 is in the correct mode (RX/TX) for your intended use.
  • Poor audio quality or intermittent connection:
    • Reduce the distance between the J23 and the connected Bluetooth device.
    • Avoid obstacles (walls, large metal objects) that may interfere with the Bluetooth signal.
    • Minimize interference from other wireless devices operating on the 2.4GHz frequency band.

6. Specifications

J23 Bluetooth 5.0 Features

Figure 12: Key features of the J23 Bluetooth 5.0 adapter

FeatureDetail
ModelJ23
Bluetooth Version5.0
Functionality2-in-1 Transmitter (TX) & Receiver (RX)
Bluetooth RangeUp to 10 meters (33 feet)
Play TimeUp to 16 hours
Multi-device ConnectionSupports 2 devices simultaneously
Built-in MicrophoneYes, for hands-free calling
Charging PortType-C
Product Dimensions5.8 x 3.3 x 1.1 cm
Product Weight15g
Charger IncludedNo
Battery IncludedNo (internal rechargeable battery)
CertificationCE

7. User Tips

  • For the best audio experience, ensure your audio source and receiving devices are within the optimal Bluetooth range (typically within 10 meters).
  • When switching between TX and RX modes, ensure the device is powered off first, then select the desired mode before powering on.
  • If experiencing pairing issues, try restarting both the J23 and the device you are trying to connect to.
  • The built-in microphone is ideal for hands-free calls in RX mode, especially useful in vehicles.

8. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact information and warranty terms.

9. Product Video

Watch this short video for a visual overview of the J23 Bluetooth Audio Transmitter Receiver:

Video: J23 Bluetooth adapter features and usage demonstration.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.