1. Introduction
The Recordio GAX-UC22 is a professional 2-input, 2-output USB audio interface designed for high-quality live streaming, recording, and home studio applications. It supports 24-bit/192KHz sampling rates, features low-noise microphone preamps, Hi-Z inputs for instruments, and a convenient LoopBack function. This manual provides detailed instructions for setting up, operating, and maintaining your GAX-UC22 audio interface.
2. Package Contents
Please check the box for the following items:
- GAX-UC22 Audio Interface
- USB Cable (Type-C compatible)
- Power Adapter (if included, check product listing)
- User Manual (this document)
3. Product Overview
Familiarize yourself with the controls and connections of your GAX-UC22 audio interface.
Front Panel Controls:
- 1/L Input (MIC/LINE/XLR): Combo input for microphones (XLR) or line-level instruments (1/4" TRS/TS).
- +48V LED: Indicates when phantom power is active for Input 1.
- Hi-Z Switch: Engages high impedance mode for direct instrument connection (e.g., guitar).
- 2/R Input (MIC/LINE/XLR): Combo input for microphones (XLR) or line-level instruments (1/4" TRS/TS).
- +48V LED: Indicates when phantom power is active for Input 2.
- LOW CUT Switch: Activates a low-cut filter to reduce unwanted low-frequency noise.
- GAIN Knobs (1/L, 2/R): Adjusts the input gain for channels 1 and 2.
- PEAK LED: Lights up when the input signal is too high, indicating potential clipping.
- LOOP BACK Switch: Activates the LoopBack function.
- DIR/ST Switch: Direct monitoring (DIR) or Stereo monitoring (ST).
- MAIN Knob: Controls the output level of the main outputs.
- PHONE Knob: Controls the output level of the headphones.
- PHONES JACK: 1/4" stereo output for headphones.
- POWER LED: Indicates the device is powered on.
Rear Panel Connections:
- MAIN OUT (R, L): 1/4" TRS/TS outputs for connecting to studio monitors or other audio equipment.
- USB Power (5V DC): Power input socket.
- USB 3.0 (Type-C): Connects to your computer or mobile device.
- POWER SOURCE SWITCH (OTG/PC USB): Selects power source mode.
- +48V PHANTOM Switch (OFF/ON): Activates/deactivates 48V phantom power for XLR inputs.
4. Setup and Connections
Follow these steps to connect your GAX-UC22 audio interface to your devices.
4.1 Powering the Device
- Connect the provided USB cable to the USB 3.0 (Type-C) port on the rear of the GAX-UC22.
- Connect the other end of the USB cable to your computer or a compatible USB power adapter (1A/5V or more).
- Ensure the POWER SOURCE SWITCH is set correctly (OTG for mobile devices, PC USB for computers).
- The POWER LED on the front panel will illuminate when the device is powered on.
4.2 Connecting to a Computer/Mobile Device
The GAX-UC22 supports Type-C interface and is compatible with PC, iOS, and Android systems.
4.3 Connecting Audio Equipment
Refer to the connection diagram for typical setups:
- Microphones: Connect XLR microphones to the 1/L or 2/R combo inputs. If using condenser microphones, activate the +48V PHANTOM switch on the rear panel. The corresponding +48V LED on the front panel will light up.
- Guitars/High Impedance Instruments: Connect your instrument to the 1/L or 2/R combo input using a 1/4" TS cable. Engage the Hi-Z switch for optimal sound quality.
- Headphones: Connect your headphones to the PHONES JACK on the front panel.
- Studio Monitors: Connect your studio monitors to the MAIN OUT (R, L) jacks on the rear panel using 1/4" TRS/TS cables.
5. Operating Instructions
5.1 Adjusting Input Gain
Use the GAIN knobs for channels 1/L and 2/R to adjust the input level of your microphone or instrument. Monitor the PEAK LED; it should only flash occasionally on the loudest parts of your signal. If it stays lit, reduce the gain to prevent clipping and distortion.
5.2 Using Phantom Power (+48V)
For condenser microphones, activate the +48V PHANTOM switch on the rear panel. This supplies power to the microphone. Ensure dynamic microphones do not have phantom power applied unless specifically designed for it.
5.3 LoopBack Function
The LoopBack function mixes the sound input from the audio interface with the sound played on your computer into a stereo signal, which is then sent back to the computer. This is useful for live streaming, online conversations, or recording computer audio simultaneously with your inputs.
To activate, press the LOOP BACK switch on the front panel.
5.4 Monitoring
- Direct Monitoring (DIR): When the DIR/ST switch is set to DIR, you hear your input signal directly from the interface with minimal latency.
- Stereo Monitoring (ST): When the DIR/ST switch is set to ST, you hear a stereo mix of your inputs and computer playback.
- Adjust headphone volume using the PHONE knob and main output volume using the MAIN knob.
5.5 Low Cut Filter
Engage the LOW CUT switch to reduce unwanted low-frequency rumble or noise from your microphone inputs, such as handling noise or air conditioning hum.
6. Maintenance
- Keep the device clean by wiping it with a soft, dry cloth.
- Avoid using liquid cleaners or solvents.
- Do not expose the device to extreme temperatures, humidity, or direct sunlight.
- Store the device in a cool, dry place when not in use.
- Avoid dropping or subjecting the device to strong impacts.
7. Troubleshooting
- No Sound Output:
- Check all cable connections (USB, headphones, monitors).
- Ensure the GAX-UC22 is selected as the audio input/output device in your computer's sound settings and recording software.
- Verify that the MAIN and PHONE knobs are turned up.
- Check the volume levels on your computer and in your recording software.
- No Input Signal:
- Ensure microphones/instruments are properly connected to the correct inputs.
- Adjust the GAIN knobs for the respective channels.
- If using a condenser microphone, ensure +48V phantom power is activated.
- If using a guitar, ensure the Hi-Z switch is engaged.
- Check the input selection in your recording software.
- Distorted Sound / Clipping:
- Reduce the GAIN knobs if the PEAK LED is constantly lit.
- Check input levels in your recording software.
- Humming/Noise:
- Ensure all cables are securely connected.
- Try engaging the LOW CUT switch for microphone inputs.
- Ensure proper grounding for all equipment.
- Avoid placing the interface near sources of electromagnetic interference.
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | GAX-UC22 |
| Type | External Audio Interface |
| Interface Type | USB (Type-C compatible) |
| Channels | 2 Input / 2 Output |
| Sampling Rate | 24-bit/192KHz |
| Output Voltage | 4.8V-5.2V |
| Output Current | 1A / 5V or more |
| Power Source | AC (via USB) |
| Built-in Battery | No |
| Inbox Adaptor | Yes |
| Material | Metal |
| Application | Live Streaming, Recording, Guitar, Dubbing Instruments, Mobile Recording/Mixing, Home Studio |
| Supported Systems | PC, iOS, Android |
| Usage | Support single and double track recording |
| Function | Bluetooth (BT) (Note: Specific BT functionality not detailed in source) |
9. User Tips
- For best recording quality, always ensure your input gain is set correctly to avoid clipping (PEAK LED flashing occasionally, not constantly lit).
- When using the LoopBack function for streaming, remember to monitor your audio carefully to prevent feedback loops.
- Utilize the Hi-Z input for direct guitar or bass recording to capture the instrument's natural tone without additional preamps.
- The compact metal case makes the GAX-UC22 highly portable for on-the-go recording or mixing.
10. Warranty and Support
The Recordio GAX-UC22 Audio Interface comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and ensures a zero-risk experience. If you encounter any issues or have questions regarding your product, please contact the seller or manufacturer's support channel for assistance.