Introduction
The Eigotrav W150 is a versatile 5-in-1 portable device designed for automotive emergencies and outdoor activities. It functions as a powerful car jump starter, a 150PSI digital air compressor, a 12000mAh power bank for charging electronic devices, and an LED flashlight with multiple modes. This manual provides essential information for safe and effective operation, maintenance, and troubleshooting.
Package Contents
Figure 1: Eigotrav W150 Jump Starter and included accessories.
- 1 x Eigotrav W150 Jump Starter Lithium Battery
- 1 x Intelligent Battery Clamp (Jumper Cable)
- 1 x Air Hose
- 1 x Micro USB Cable
- 1 x Microfiber Bag
- 1 x User Manual
Specifications
| Feature | Specification |
|---|---|
| Model No. | Samrt Box 12 (W150) |
| Material | Lithium |
| Dimensions | 206 x 110 x 54 mm |
| Weight | 1.45 kg |
| Battery Voltage | 12V |
| Battery Capacity | 12000 mAh lithium polymer battery (3.7 V) |
| Rated Capacity | 44.4 Wh |
| Constant Starting Current | 400A |
| Peak Starting Current | 6000A |
| Engine Compatibility (Petrol) | Up to 8.5 liters |
| Engine Compatibility (Diesel) | Up to 7.0 liters |
| Cylinder Diameter | 19 mm |
| Cylinder Rated Power | 120 W |
| Inflation Pressure (MAX) | 150 PSI |
| Input | 5V-2A (current range 0.5A-2A) |
| USB Output | 5V-3A; 9V-12A; 12V-1.5A (Supports Quick Charge 3.0 protocol) |
| Supported Battery Types | Lead-acid batteries and wet, gel, MF, EFB and AGM batteries |
| Operating Temperature | -10 °C to +85 °C (14°F to 185°F) |
| External Testing Certification | CE |
Key Features
- 6000A Peak Current Jump Starter: Capable of starting 12V vehicles with up to 8.5L petrol or 7.0L diesel engines.
- 150PSI Digital Air Compressor: Inflates car tires, motorcycle tires, bicycle tires, and various inflatables with high precision.
- 12000mAh Power Bank: Equipped with USB ports (5V/3A; 9V/12A; 12V/1.5A) for charging phones, tablets, and other USB-powered devices.
- Multifunctional LED Flashlight: Features stable, strobe, and SOS modes for emergency lighting and signaling.
- Intelligent Protection System: Includes 10 integrated safety functions for secure operation.
- LCD Display: Shows operating status, pumping status, battery level, and potential malfunctions.
- Honeycomb Structure Heat Dissipation: Designed to reduce battery temperature and extend service life.
Safety Information
The Eigotrav W150 is designed with an intelligent protection system to ensure safe operation. This system protects against:
Figure 2: Intelligent Protection System features.
- Spark Proof Protection
- Over Load Protection
- Reverse Charge Protection
- Over Charge Protection
- Reverse Polarity Protection (with automatic alarm)
- Over Voltage Protection
- AI Software Monitoring
- Short Circuit Protection
- Over Current Protection
- High and Low Temperature Protection
Important Safety Notes:
- Never connect the black clamp to the red clamp.
- Do not use the jump starter to start the vehicle continuously. Allow at least 30 seconds of rest between attempts.
- Ensure the jump starter's power level is above 50% before attempting to jump start a vehicle.
- Do not jump start your car if the jump starter is excessively hot (e.g., immediately after charging or prolonged exposure to high temperatures).
- Do not charge the product if it feels hot to the touch.
- Not suitable for jump starting vehicles with engine displacement larger than recommended specifications.
Setup
Initial Charging
Before first use, fully charge the Eigotrav W150 using the provided Micro USB cable. Connect the Micro USB cable to the input port on the device and the other end to a suitable USB power adapter (not included). The LCD display will indicate the charging status and battery level.
Preparing for Use
- Ensure the device is adequately charged (preferably above 50% for jump starting).
- Familiarize yourself with the ports and buttons on the device.
- Keep the intelligent battery clamps and air hose readily accessible.
Operating Instructions
1. Jump Starting a Vehicle
Figure 3: Jump starter connected to a car battery.
- Ensure the Eigotrav W150 is charged above 50%.
- Turn off your vehicle's ignition and all accessories (lights, radio, A/C).
- Connect the red (+) clamp of the intelligent battery clamp to the positive (+) terminal of your vehicle's battery.
- Connect the black (-) clamp to the negative (-) terminal of your vehicle's battery.
- Plug the intelligent battery clamp connector into the jump starter port on the Eigotrav W150.
- The LCD display will show the connection status. If a reverse polarity alarm sounds, immediately disconnect and re-connect the clamps correctly.
- Once connected correctly, turn on the power switch on the Eigotrav W150.
- Start your vehicle.
- Once the vehicle starts, immediately disconnect the intelligent battery clamp from the jump starter, then remove the black (-) clamp from the vehicle battery, followed by the red (+) clamp.
Note: If the vehicle does not start on the first attempt, wait at least 30 seconds before trying again. Do not exceed 3 consecutive attempts.
2. Using the Air Compressor
Figure 4: Air compressor in use, inflating a car tire.
Figure 5: Wide range of applications for the inflation nozzles.
- Connect the air hose to the air compressor port on the Eigotrav W150.
- Attach the appropriate nozzle to the air hose for the item you wish to inflate (car tire, bicycle tire, ball, inflatable mattress, etc.).
- Connect the nozzle securely to the item's valve.
- Turn on the air compressor function on the Eigotrav W150.
- Use the LCD display to monitor the current pressure and set the desired target pressure.
- The compressor will automatically stop once the target pressure is reached.
- Disconnect the nozzle from the item and then remove the air hose from the Eigotrav W150.
Note: The air compressor can inflate car tires from 0 to 20 PSI in approximately 6 minutes.
3. Using as a Power Bank
The Eigotrav W150 features USB output ports for charging your electronic devices.
- Connect your device's USB charging cable to one of the USB output ports on the Eigotrav W150.
- Connect the other end of the cable to your smartphone, tablet, camera, Kindle, or other compatible device.
- The device will begin charging automatically.
Output Specifications: 5V/3A; 9V/12A; 12V/1.5A (Supports Quick Charge 3.0 protocol).
4. Using the LED Flashlight
Figure 6: LED flashlight providing illumination.
The integrated LED flashlight has three modes for various situations:
- Stable Light: For general illumination.
- Strobe Light: For attracting attention.
- SOS Signal: For emergency signaling.
To activate and cycle through the modes, press the flashlight button (refer to the device's physical layout for exact button location).
Maintenance
- Regular Charging: It is recommended to perform a discharge/charge cycle at least every three months. This involves fully discharging the jump starter and then fully recharging it to maintain battery health.
- Storage: Store the Eigotrav W150 in a cool, dry place, away from direct sunlight and extreme temperatures.
- Cleaning: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Check Cables: Periodically inspect the intelligent battery clamps and air hose for any signs of damage or wear. Replace if necessary.
Troubleshooting
- Device not turning on: Ensure the device is charged. If it's completely drained, it may take a few minutes of charging before it responds.
- Vehicle not starting:
- Check if the jump starter's battery level is above 50%.
- Verify that the intelligent battery clamps are connected correctly to the vehicle's battery terminals (red to positive, black to negative).
- Ensure the clamps have a good, clean connection to the battery terminals.
- Wait 30 seconds between jump start attempts.
- Confirm your vehicle's engine size is within the recommended limits (8.5L petrol / 7.0L diesel).
- Air compressor not inflating:
- Check if the air hose and nozzle are securely connected.
- Ensure the device has sufficient battery charge.
- Verify the target pressure setting on the LCD display.
- Device overheating: Stop using the device immediately and allow it to cool down in a well-ventilated area. Do not charge or use if it feels hot.
- Reverse Polarity Alarm: If the alarm sounds, immediately disconnect the clamps and re-connect them correctly (red to positive, black to negative).
User Tips
- Always keep your Eigotrav W150 charged, especially before long trips or during cold weather, as battery performance can be affected by temperature.
- Store the device in its microfiber bag to protect it from dust and minor impacts.
- When inflating tires, always check your vehicle's recommended tire pressure (usually found on a sticker inside the driver's door jamb or in the owner's manual).
- The LED flashlight's SOS mode can be crucial in emergency situations, so know how to activate it quickly.
- Consider keeping the user manual (or a digital copy) with the device for quick reference during emergencies.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the official Eigotrav website. Keep your purchase receipt as proof of purchase.
