Introduction
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your MOMAN M6 4K Android 11 Projector. Please read this manual thoroughly before using the projector to ensure proper and safe operation.
The MOMAN M6 Projector, showcasing its 650 ANSI brightness, Auto Keystone, 1080P Native resolution, WiFi6, and Bluetooth 5.2 capabilities.
Important Safety Information
- Do not look directly into the projector lens when the lamp is on.
- Ensure proper ventilation around the projector to prevent overheating.
- Keep the projector away from water or other liquids.
- Use only the power adapter specified for this device.
- Do not attempt to disassemble or repair the projector yourself. Contact qualified service personnel.
- Keep out of reach of children.
Package Contents
Please check the package for the following items:
- MOMAN M6 Projector
- Remote Control (Assumed, common for projectors)
- User Manual (This document)
- Note: A power adapter is required for operation. Please ensure you have the correct power adapter for your region, as it may not be included in all packages.
- Other accessories as specified on the product packaging.
Setup
1. Placement
Position the projector on a stable, flat surface. Ensure there is adequate space around the projector for ventilation. The M6 projector features a T4 projective mode, allowing for flexible placement. Adjust the projector's angle to achieve the desired screen position.
The M6 projector can project screen sizes from 60 inches (approx. 139cm distance) to 150 inches (approx. 385cm distance), tailored to fit your room.
2. Power Connection
Connect the appropriate power adapter (not included in all packages, please check your specific purchase) to the projector's power input port, then plug the adapter into a suitable AC power outlet. The projector supports both AC and DC power sources.
3. Initial Power On
Press the power button on the projector or the remote control to turn on the device. The projector will boot up, displaying the Android 11 interface.
4. Focus and Keystone Correction
The M6 projector features automatic keystone correction and auto focus. The projector will automatically adjust the image for optimal clarity and rectangular shape. If manual adjustment is needed, navigate to the settings menu.
The M6 Projector features 1080P Native resolution, 650 ANSI brightness, Auto Focus, WiFi6, and Bluetooth 5.2.
5. Network Connection
Navigate to the settings menu on the Android 11 interface to connect to your Wi-Fi network. The projector supports Dual WiFi6 for fast and stable wireless connectivity.
6. Plug Type Selection (if applicable)
Ensure you have the correct plug type for your region (EU, US, AU, UK) to connect the power adapter.
Operating Instructions
1. Android 11 Interface
The projector runs on Android 11, providing a familiar and intuitive user experience. Use the remote control to navigate through apps, settings, and content.
2. Content Playback
The M6 projector is designed for video playback. You can stream content from installed apps, connect external devices via available ports (if any, not explicitly listed but common), or use screen mirroring features.
3. Wireless Screen Mirroring
The projector supports Miracast, Airplay, and DLNA for seamless screen mirroring from your phone, tablet, or laptop. Follow these general steps:
- Ensure your device and the projector are connected to the same Wi-Fi network.
- Select the appropriate screen mirroring option (Miracast, Airplay, or DLNA) on the projector's interface.
- On your mobile device or laptop, initiate the screen mirroring function and select the M6 projector from the list of available devices.
Wireless screen mirroring allows seamless casting from your phone, tablet, or laptop using Miracast, Airplay, or DLNA.
4. Bluetooth Connectivity
The projector features Bluetooth 5.2, allowing you to connect external audio devices such as Bluetooth speakers or headphones for an enhanced audio experience.
- Go to the Bluetooth settings on the projector.
- Enable Bluetooth and put your audio device into pairing mode.
- Select your audio device from the list of available devices to connect.
Connect external audio devices like speakers and headphones via Bluetooth for immersive sound.
Maintenance
1. Cleaning the Lens
Gently wipe the projector lens with a soft, lint-free cloth specifically designed for optical surfaces. Do not use abrasive cleaners or excessive force, as this can scratch the lens.
2. Cleaning the Projector Body and Vents
Use a soft, dry cloth to clean the exterior of the projector. For dust accumulation in the ventilation vents, use a soft brush or compressed air to carefully remove it. Ensure the projector is turned off and unplugged before cleaning.
3. Storage
When not in use for extended periods, store the projector in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective case to prevent dust and damage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No image projected | Power issue, input source not selected, lens cap on, projector in standby. | Check power connection. Ensure the projector is turned on. Verify the input source. Remove any lens cap. |
| Blurred image | Out of focus, incorrect keystone correction. | Allow auto focus to adjust. Check keystone correction settings; the projector has auto correction. |
| No sound | Volume too low, external audio device not connected, incorrect audio output selected. | Increase volume. Ensure Bluetooth audio device is properly paired. Check audio output settings in Android 11. |
| Cannot connect to Wi-Fi | Incorrect password, out of range, network issue. | Verify Wi-Fi password. Move projector closer to router. Restart router and projector. |
| Screen mirroring issues | Devices not on same network, mirroring function not enabled. | Ensure both devices are on the same Wi-Fi network. Enable Miracast/Airplay/DLNA on the projector and your source device. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MOMAN |
| Model | M6 |
| Category | Projectors |
| Operating System | Android 11 |
| Brightness | 650 ANSI Lumens |
| Native Resolution | 1080P HD |
| Connectivity | Dual WiFi6, Bluetooth 5.2 |
| Keystone Correction | Auto Correction |
| Focus | Auto Focus |
| Projective Mode | T4 |
| Supported Screen Mirroring | Miracast, Airplay, DLNA |
| Function | Video Playback |
| Power Source | AC&DC |
| Projected Display Size | 60" - 150" (optimal viewing) |
| Dimensions (L x W x H) | 18.9 cm x 12.8 cm x 14.4 cm (7.44 in x 5.03 in x 5.66 in) |
| Weight | 0.998 kg |
| Origin | Mainland China |
| Certification | CE |
Physical dimensions of the MOMAN M6 Projector.
Warranty and Support
For warranty information and technical support, please refer to the seller's policies or contact the retailer where you purchased the MOMAN M6 Projector. Keep your proof of purchase for any warranty claims.
User Tips
- Bluetooth Audio: Easily connect your favorite Bluetooth headphones or speakers for a more personal or powerful audio experience, especially useful for outdoor movie nights.
- Portable Entertainment: The compact and low-noise design makes this projector ideal for moving between rooms or taking outdoors for a spontaneous movie screening.
- Screen Mirroring: Utilize Miracast, Airplay, or DLNA for quick and easy sharing of content from your mobile devices or laptop without needing cables.
- Automatic Adjustments: Take advantage of the auto keystone correction and auto focus features for a hassle-free setup and clear image every time.
The MOMAN M6 Projector is versatile for various entertainment scenarios, from outdoor movies to gaming and home cinema.
