Introduction
The AUSDOM 98Pro is a versatile wireless mechanical keyboard designed for enhanced typing experience and productivity. It features a gasket structure, hot-swappable switches, and multiple connection modes (Bluetooth, 2.4G wireless, and USB-C wired). This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your keyboard.
Video: Product demonstration and key features overview.
Setup
Packing List
Before you begin, please ensure all items are present in the package:
- AUSDOM 98Pro Wireless Mechanical Keyboard
- USB-C Cable
- 2.4G USB Receiver
- Keycap Puller
- Switch Puller
- User Manual (this document)
Image: Contents of the AUSDOM 98Pro keyboard package.
Power On/Off
Locate the independent power switch on the keyboard. Ensure it is in the 'ON' position before use. Turn it 'OFF' when not in use to conserve battery.
Image: Power and connection mode switches.
Connection Modes
The AUSDOM 98Pro supports three connection methods: Bluetooth, 2.4G Wireless, and USB-C Wired. You can connect up to 5 devices simultaneously, with 3 of these being Bluetooth connections.
Image: Overview of the three connection modes.
1. Bluetooth Connection
- Ensure the keyboard is powered on.
- Switch the connection mode to Bluetooth (usually indicated by a 'BT' or Bluetooth icon on the switch).
- On your device (computer, tablet, phone), enable Bluetooth and search for new devices.
- Select 'AUSDOM 98Pro' from the list of available devices to pair.
- Note: Windows 7 and below system versions do not support Bluetooth connections.
2. 2.4G Wireless Connection
- Ensure the keyboard is powered on.
- Switch the connection mode to 2.4G wireless (usually indicated by a '2.4G' or wireless icon on the switch).
- Plug the 2.4G USB receiver into an available USB port on your computer.
- The keyboard should automatically connect.
3. USB-C Wired Connection
- Connect one end of the provided USB-C cable to the keyboard's USB-C port.
- Connect the other end of the cable to an available USB port on your computer.
- The keyboard will automatically switch to wired mode and begin charging.
Image: USB-C port for wired connection and charging.
Operating Instructions
Backlight Control
The keyboard features a white backlight with 4 levels of brightness and 16 different light effects. Use the following key combinations to adjust:
- Change Backlight Levels: Press Fn + ↑ (Up Arrow) to increase brightness, Fn + ↓ (Down Arrow) to decrease brightness.
- Change Backlight Effects: Press Fn + ← (Left Arrow) or Fn + → (Right Arrow) to cycle through different lighting effects.
Image: Backlight control key combinations.
Mac/Win Layout Switching
Easily switch between Mac and Windows layouts to optimize your workflow:
- Switch to Mac Layout: Press Fn + O
- Switch to Windows Layout: Press Fn + P
Image: Mac/Win layout switching instructions.
Battery Status Check
To check the current battery level of your keyboard:
- Press and hold Fn + =+ simultaneously.
- The backlight indicators will show the approximate battery percentage.
- Note: This function is not supported in wired mode.
Image: Battery check function and indicators.
Anti-Ghosting / Game Mode
The keyboard features 97-key anti-ghosting to ensure all key presses are registered accurately, even during rapid input. To prevent interruptions during gaming:
- Press Fn + Win to enter game mode, which typically locks the Windows key.
Image: Anti-ghosting and game mode activation.
Software Customization
The AUSDOM 98Pro offers driver software for advanced customization of key functions, backlight effects, and macro settings. You can also use it to upgrade firmware.
- The software only supports customization in 2.4G wireless and wired modes.
- The software is compatible only with the Windows operating system.
Image: Programmable software interface for customization.
Maintenance
Cleaning
To keep your keyboard in optimal condition:
- Disconnect the keyboard from all devices and power sources before cleaning.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use a keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Avoid using harsh chemicals or abrasive materials.
Switch and Keycap Replacement
The AUSDOM 98Pro features hot-swappable switches, allowing for easy replacement and customization without soldering. It is compatible with most 3-pin and 5-pin mechanical switches.
- Use the provided keycap puller to gently remove the desired keycap.
- Use the provided switch puller to carefully grip and pull out the switch.
- Align the pins of the new switch with the holes on the PCB and press firmly until it clicks into place.
- Replace the keycap.
Image: Hot-swappable switch replacement process.
Troubleshooting
- Keyboard not responding: Ensure the keyboard is powered on and fully charged. Check the connection mode switch (Bluetooth, 2.4G, or Wired) matches your connection method. For wireless, ensure the receiver is properly plugged in or Bluetooth is paired.
- Backlight not working: Check if the backlight is turned off or set to the lowest brightness level using Fn + ↑/↓.
- Bluetooth connection issues: Ensure your device's Bluetooth is enabled and the keyboard is in pairing mode. Forget the device on your computer/phone and re-pair. Remember, Windows 7 and older systems do not support Bluetooth.
- Software not working: Verify the keyboard is connected via 2.4G wireless or wired mode. Ensure your operating system is Windows, as the software does not support other systems.
- Keys not registering: If specific keys are not working, try removing and re-inserting the switch for that key, as it might not be seated correctly.
Specifications
| Feature | Specification |
|---|---|
| Brand | AUSDOM |
| Model | 98Pro |
| Type | Bluetooth Wireless Mechanical Keyboard |
| Operation Style | Mechanical |
| Keyboard Standard | 97 Keys (95% Layout) |
| Application | Desktop, Laptop, Tablet |
| Interface Type | USB (Type-C) |
| Language | English |
| Backlight Type | Monochrome (White), 4 levels, 16 effects |
| Switches Hot Swap | Yes (3-pin/5-pin compatible) |
| Battery Included | Yes (3000mAh) |
| Style | Standard, Ergonomics, Multimedia, Gaming, For Laptop, for Tablet, Multifunctional Keyboard |
| Certification | CE, FCC, RoHS |
| Special Feature | Ergonomic, Gasket Structure Design, Backlit, 3-Mode Connection, Hot-Swappable |
| Weight | Approx. 2.07 lbs (0.94 kg) |
| Dimensions (L x W x H) | Approx. 15.5 x 5.6 x 1.5 inches (39.4 x 14.2 x 3.8 cm) |
User Tips
- Experiment with Switches: Since the keyboard is hot-swappable, consider trying different types of 3-pin or 5-pin mechanical switches to find the typing feel that best suits your preference.
- Utilize Multi-Device Connectivity: Take advantage of the three connection modes to seamlessly switch between your desktop, laptop, and tablet, enhancing productivity across multiple devices.
- Customize with Software: If you are a Windows user, download the official driver software to unlock full customization options for key remapping, macros, and advanced lighting effects.
- Ergonomic Comfort: Adjust the two-part foot support and appreciate the varied keycap heights to maintain a comfortable typing posture and reduce strain during long sessions.
Warranty and Support
For warranty information, technical support, or further assistance, please refer to the official AUSDOM website or contact their customer service directly. Keep your proof of purchase for any warranty claims.
