Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your Beok BOT-506X Wireless Thermostat. This intelligent one-to-one temperature controller is designed for underfloor heating systems, gas-fired wall-hung boilers, and electric valves. It regulates ambient temperature to ensure comfort and energy savings, offering compatibility with smart home systems like Tuya, Smart Life, Google Home, and Amazon Alexa.
For optimal performance and safety, please read this manual thoroughly before installation and use. Keep all wire ends concealed. As some circuits of this product involve high-voltage electricity, installation should be carried out by professionals.
Package Contents
Upon unpacking, please verify that all the following items are included:

- Thermostat
- Receiver
- User Manual
- USB Type-C power cable
- Jumper
- Magnetic Mounting Base
- Screws x2
Setup and Installation
Power Supply Options
The thermostat offers flexible power options:

- **3xAAA Batteries:** The thermostat runs on 3 standard AAA batteries (not included). When the low battery indicator is displayed, battery replacement is required. Use a flat-head screwdriver to pry open the back cover for battery replacement.
- **Type-C Cable (dual-port design):** The thermostat can also be powered via a Type-C USB cable. Either of the two ports (side or back) on the device body can be used for connection.

Mounting Options
The thermostat can be installed in two ways:

- **Wall Mount:** Securely mounts to walls using screws only. No junction box is required.
- **Table Stand:** Utilizes a detachable magnetic base for tool-free placement on a desktop or other flat surface.
**Installation Steps (for wall mount):**
- Use a screwdriver to pry open the display panel of the device.
- Place the back panel in the desired installation position, insert it, and tighten the screws.
- Cover the panel. The installation is complete.
Wiring Diagram
Important Safety Note: No live wiring. Keep all wire ends concealed. As some circuits of this product involve high-voltage electricity, installation should be carried out by professionals.

The receiver connects to the boiler via passive contacts. The wiring diagram illustrates connections for AC 220V power and the wall-mounted boiler signal line. There is no color distinction for positive and negative wires for the boiler signal line.
| Terminal Block | Controlling Device | Wiring Instructions |
|---|---|---|
| NO1 | Normally-Closed Electric Actuator | Connect to NO1 and N |
| NC1 | Normally-Open Electric Actuator | Connect to NC1 and N |
| M | External Circulation Pump <5A | Connect to M and N |
The product video also demonstrates the wiring for passive contacts, showing connections for NO (Normally Open) and COM (Common), and for COM (Common) and NC (Normally Closed) depending on boiler requirements.
**Video Description:** This video demonstrates the Beok BOT-506X Wireless Thermostat and its receiver. It shows how to set the temperature on the thermostat, the receiver indicating heating is on, and the effect of heating. It also illustrates the power options (battery-powered and USB-powered via Type-C cable) and how the receiver connects to the boiler via passive contacts (NO/COM and COM/NC wiring options). The video concludes by showing the thermostat's daily programmable feature and its application for both heating and cooling.
Device Pairing and Connection
To pair the thermostat with its receiver:
- With the device powered on, long press the pairing key on the receiving panel until its signal light starts to flash.
- Long press the 'V' (down arrow) key on the transmitting panel (thermostat) until the signal light on the receiving panel stops flashing.
- In heating mode, set the temperature above room temperature. If the device sends a signal and all three indicator lights on the receiving panel are lit, the pairing is successful.
Wi-Fi Connection (Tuya Smart / Smart Life App)
The Beok BOT-506X thermostat can be controlled via the Tuya Smart or Smart Life app. Follow these steps to connect:
1. Download the App
Search for "Tuya Smart" or "Smart Life" in your device's app store (e.g., Google Play Store, Apple App Store) or scan the QR code below to download.

2. Register an Account
If you don't have an account, choose to register via SMS verification code. Click "Create a new account" and follow the prompts. After reviewing and agreeing to the Privacy Policy, you will proceed to the registration page. Enter your mobile phone number or email address, click "get verification code", enter the received code, set your password, and click "finish" to register.
3. Activate Thermostat Wi-Fi Module
Ensure your mobile phone's Bluetooth and Wi-Fi are turned on and connected to a 2.4GHz Wi-Fi network. When the thermostat is powered on, press and hold the '∧' (up arrow) button for 5 seconds. The Wi-Fi icon on the thermostat display will flash, indicating it has entered code matching state.
4. Add Device to App
There are multiple ways to add the device:
- **Method 1 (Automatic Pop-up):** Enter the Tuya APP. The main page may automatically pop up "Device to be added". Click "Add".
- **Method 2 (Manual Search):** On the app's homepage, click "Add Device" or the "+" icon in the upper right corner. Enter the "Add Device" interface. The app will prompt you to find the device to be added. Follow the on-screen prompts.
- **Method 3 (Category Search):** On the app's homepage, click the "+" icon. Find the "Temperature Control" product (Bluetooth + Wi-Fi model) under "Small Household Appliance" or "HVAC". Follow the prompts to reset the device (power off for 10s, then power on again, or hold the RESET button for 5s). Confirm the indicator is blinking and proceed.
5. Enter Wi-Fi Information
Enter the name and password of your 2.4GHz Wi-Fi network. Ensure the Wi-Fi name and password contain only numbers and letters (no special symbols). Follow the prompts. The device will be added successfully after a few seconds (time may vary based on Wi-Fi signal strength).
Operation
Thermostat Controls and Icons
Familiarize yourself with the thermostat's display and buttons:

- **ON/OFF Key (Power Button):** Press once to power on, press again to power off and close all valves.
- **M Mode Conversion Key:** Press 'M' to switch between working modes when powered on.
- **∧ / V Adjustment Keys:** Press '∧' or 'V' to adjust the set temperature and other parameters when powered on.
- **Pairing Icon:** Indicates pairing status.
- **Wi-Fi Icon:** Indicates Wi-Fi connection status.
- **Battery Icon:** Shows battery level.
- **Output Icon:** Indicates heating/cooling output.
- **Heating Icon:** Indicates heating is active.
- **Cooling Icon:** Indicates cooling is active.
- **Anti-freeze function icon:** Indicates anti-freeze function is active.
- **Child Lock Icon:** Indicates child lock is active.
Operating Modes
The thermostat supports three operating modes:

- **Manual Mode:** The thermostat runs according to the temperature you set manually.
- **Auto Mode:** The thermostat will run automatically according to the program you have set up.
- **Temporary Mode:** If the set temperature is manually adjusted while in Auto Mode, the thermostat enters temporary mode. It will run according to your manual settings and resume programming mode at the next programming time point.
To switch between Manual/Auto modes, press the 'M' button on the thermostat or select in the app.
Daily Programming
You can set different temperature changes for each day of the week to fit your schedule. The room temperature will change automatically when Auto Mode is turned on. There are 6 individually programmable periods for each day of the 7-day week.
A default 7-day programming is built-in, which you can modify directly on the thermostat or in the app.
Default Programming Schedule:
| Period | Time | Temperature |
|---|---|---|
| 1 | 06:00 | 20°C |
| 2 | 08:00 | 16°C |
| 3 | 11:30 | 16°C |
| 4 | 12:30 | 16°C |
| 5 | 17:00 | 22°C |
| 6 | 22:00 | 16°C |
**Note:** The latest time to set a period is 23:59.
Modifying Programming on the Thermostat:
- **Enter High Level Settings:** In the power-on state, long press 'M' to enter advanced settings.
- **Select "Programming":** Tap the '∧' and 'V' buttons to switch between programs until "Pro" (short for Program) appears.
- **Enter "Programming":** Tap the 'M' button to enter daily programming.
- **Select Day of the Week:** The screen displays "Mon". Press the '∧' and 'V' keys to change the day. Tap 'M' to confirm and enter start time modification.
- **Modify Start Time:** Tap the '∧' and 'V' keys to modify the start time of the period. Tap 'M' to confirm and enter temperature modification.
- **Modify Temperature:** Tap the '∧' and 'V' keys to change the temperature of the period. Tap 'M' to confirm and go to the start time modification of the next time period.
- **Continue for all Periods/Days:** Continue this process until all 6 time periods of the day have been set. Tap 'M' to confirm, then you can proceed to the next day's settings until all 7 days are set.
- **Final Confirmation and Exit:** After all 7 days have been set, press the ON/OFF button to confirm and exit the advanced settings.
Modifying Programming in the App:
- Open the Smart Life or Tuya Smart app. At the bottom of the homepage, tap "Setting".
- Tap "Program" in the setting menu.
- Set the temperature for each of the 7 days of the week according to your needs, and then press "Confirm" to save.
App and Voice Control
Once connected to the Tuya Smart or Smart Life app, you can remotely control your thermostat from anywhere. The app interface allows for easy adjustment of settings and monitoring of room temperature.

The thermostat is compatible with popular voice assistants, allowing for convenient hands-free control:

- Google Assistant
- Amazon Alexa
- Yandex Alice
Simply use voice commands such as "Set my room to 24°C" to adjust your thermostat.
Heating and Cooling Functionality
The thermostat supports both heating and cooling operations, providing year-round comfort control.

Maintenance
Battery Replacement
When the low battery indicator appears on the display, it's time to replace the batteries. The thermostat uses 3 AAA batteries.
- Carefully pry open the back cover of the thermostat using a flat-head screwdriver.
- Remove the old AAA batteries.
- Insert three new AAA batteries, ensuring correct polarity.
- Close the back cover securely.

Cleaning
To maintain the appearance and functionality of your thermostat, wipe it regularly with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the device.
Troubleshooting
Common Issues and Solutions
- **Thermostat not powering on:** Check battery installation and charge level. If using USB power, ensure the cable is securely connected and the power source is active.
- **Low Battery Alert:** Replace the 3 AAA batteries as described in the Maintenance section.
- **Wi-Fi Connection Issues:**
- Ensure your router is broadcasting a 2.4GHz Wi-Fi signal. The thermostat does not support 5GHz Wi-Fi.
- Verify that your Wi-Fi network name (SSID) and password contain only alphanumeric characters. Special symbols can cause connection failures.
- Make sure the thermostat's Wi-Fi module is activated (Wi-Fi icon flashing) before attempting to add it to the app.
- Try restarting your Wi-Fi router and the thermostat.
- Ensure your phone's Bluetooth is enabled during the pairing process.
- **Temperature Display Inaccurate (Calibration):** If the room temperature displayed by the thermostat does not match the actual room temperature, you can calibrate it.
- In power-on state, long press 'M' to enter advanced settings.
- Press '∧' or 'V' to select the "temperature calibration" parameter.
- Press 'M' to enter, then '∧' or 'V' to adjust the calibration value (-9.9°C to +9.9°C).
- Press 'M' to confirm and exit.
- **Child Lock Function:** To activate/deactivate the child lock, long-press '∧' and 'V' simultaneously for 5 seconds when powered on. A lock icon will appear/disappear on the right of the display, indicating the keys are locked/unlocked.
- **Frost Protection:** This function can be turned ON or OFF in the advanced settings. When ON, it helps prevent pipes from freezing by activating heating if the temperature drops too low.
- **Resetting the Thermostat:** To reset the thermostat, long press the 'M' key until the thermostat shows "---". The reset is complete.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | beok |
| Model | BOT-506X (W-WIFI / B-WIFI) |
| Certification | CE |
| Origin | Mainland China |
| Equipment Power Supply | Three AAA batteries or USB Type-C |
| Receiver Power Supply | 220V AC |
| Protection Level | IP20 |
| Temperature Sensor | NTC |
| Temperature Accuracy | 0.5℃ |
| Temperature Hysteresis | 0.5℃ - 10℃ (Default 1℃) |
| Temperature Setting Range | 5-35℃ |
| Load Current | 3A (resistive) |
| Self-Consumption Power | Less than 170 μW |
| Dimensions (Thermostat) | 140mm (W) x 81mm (H) x 24mm (D) |
| Wall-mounted backplate spacing | 90mm |

Warranty and Support
If you encounter any problems during the use of the product, please feel free to contact us through the purchase platform. We will do our best to help you.
For additional item guides and documents, including the full user manual in PDF format, please refer to the official product page or the provided PDF link: User manual (PDF).