KKMOON MIG/MMA-160A

Contents

User Manual: KKMOON MIG/MMA-160A Welding Machine

Inert Gas Shielded Automatic Wire Feeding Current Adjustable IGBT DC Inverter Electric Arc Welder

1. Introduction

Thank you for choosing the KKMOON MIG/MMA-160A Welding Machine. This 2-in-1 welding machine is designed for both MIG (Metal Inert Gas) and MMA (Manual Metal Arc) welding processes. It features advanced IGBT inverter technology, automatic wire feeding, and adjustable current settings, making it suitable for a variety of welding tasks on low carbon steel, medium carbon steel, and alloy steel. Its compact size, lightweight design, and multiple protection features ensure reliable and efficient operation. Please read this manual thoroughly before operation to ensure safe and proper use of the equipment.

KKMOON MIG/MMA-160A Welding Machine with accessories
Figure 1: KKMOON MIG/MMA-160A Welding Machine and included accessories.

2. Safety Information

WARNING: Welding can be dangerous. Always follow safety precautions to prevent injury or death.

  • Always wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation in the work area to avoid inhaling welding fumes.
  • Protect bystanders from arc rays and hot metal.
  • Never weld near flammable materials or in explosive atmospheres.
  • Ensure the welding machine is properly grounded.
  • Do not touch live electrical parts.
  • Disconnect power before performing any maintenance or adjustments.
  • Keep children and unauthorized personnel away from the welding area.
  • Always use the machine in a dry environment.

3. Package Contents

Upon unpacking, please verify that all items listed below are present and undamaged. If any items are missing or damaged, contact your supplier immediately.

Packing list for KKMOON MIG/MMA-160A Welding Machine
Figure 2: Visual representation of the package contents.
  • 1 x 2-in-1 Welding Machine (MIG/MMA-160A)
  • 1 x 450g Welding Wire
  • 1 x MIG-14AK Torch
  • 1 x 200A Electrode Holder (for MMA welding)
  • 1 x 300A Earth Clamp
  • 1 x Welding Mask
  • 1 x Wire Brush
  • 1 x Shoulder Strap
  • 1 x Guideline (User Manual)

4. Product Overview

4.1 Front Panel Description

Front panel description of the MIG/MMA-160A welding machine
Figure 3: Labeled front panel of the welding machine.
  • Control Panel: Displays current settings.
  • Current Indicator (A): Digital display showing the welding current in Amperes.
  • Selective Switch: Used to select between MMA, FLUX 0.8, and FLUX 1.0 modes.
  • Current Adjustment Knob (Min/Max): Adjusts the welding current for both MMA and MIG modes.
  • MIG/MMA Torch Euro Connector: Connection point for the MIG torch or MMA electrode holder.
  • Negative Polarity Connector: Connection point for the earth clamp.
  • MIA Control Switch: (Specific function not detailed in image, generally for mode or wire feed control).

4.2 Rear Panel Description

Rear panel of the MIG/MMA-160A welding machine showing power switch and fan
Figure 4: Rear panel with power switch and cooling fan.
  • Power Switch (ON/OFF): Controls the main power to the unit.
  • Cooling Fan: Provides efficient heat dissipation during operation.

5. Specifications

Specifications and suitable materials for the MIG/MMA-160A welding machine
Figure 5: Detailed specifications and compatible materials.
Technical Specifications
FeatureSpecification
ModelMIG-160A
MaterialMetal
Voltage220 V
Rated Input Power Capacity6.3 kVA
Current TypeDirect Current (DC)
Operating ModeInverter Welding
Rated Output Voltage230V
Output Current Adjustment Ranges20-120A
Working ObjectSteel (Low Carbon, Medium Carbon, Alloy Steel)
Power Factor0.93
No-load Voltage65V
Item Dimensions (L*W*H)305 * 155 * 205 mm (12.01 * 6.10 * 8.07 in)
Item Weight5.363 kg (11.82 lb)

6. Setup

6.1 Wire Feeding (MIG Mode)

The machine features a built-in wire feeder. Follow these steps to load the welding wire:

  1. Open the wire feeder compartment cover on the top of the machine.
  2. Place the 450g welding wire spool onto the spindle.
  3. Thread the welding wire through the guide tube and into the wire feed mechanism.
  4. Ensure the wire is properly seated in the drive rollers.
  5. Close the compartment cover.
  6. Adjust the wire feed speed using the voltage adjustable knob on the front panel.
Instructions for loading welding wire into the built-in wire feeder
Figure 6: Built-in wire feeder and wire loading process.

6.2 Connecting Welding Accessories

  1. Earth Clamp: Connect the 300A Earth Clamp to the negative polarity connector on the front panel. Secure the other end of the earth clamp to the workpiece, ensuring good electrical contact.
  2. MIG Torch: For MIG welding, connect the MIG-14AK Torch to the MIG/MMA torch Euro connector on the front panel. Ensure it is securely fastened.
  3. MMA Electrode Holder: For MMA welding, connect the 200A Electrode Holder to the MIG/MMA torch Euro connector on the front panel.
  4. Power Connection: Ensure the power switch on the rear panel is in the "OFF" position. Connect the machine's power cord to a suitable 220V power outlet.

7. Operating Instructions

7.1 Powering On and Mode Selection

  1. Turn the power switch on the rear panel to the "ON" position. The digital display on the front panel will illuminate.
  2. Use the Selective Switch on the front panel to choose your desired welding mode:
    • MMA: For Manual Metal Arc welding (stick welding).
    • FLUX 0.8 / FLUX 1.0: For Gas-Shielded MIG welding with 0.8mm or 1.0mm flux-cored wire (or solid wire with external gas supply). The product title indicates "Inert Gas Shielded", implying MIG mode requires an external gas supply for true MIG welding, or flux-cored wire for gasless MIG.
MIG and MMA welding modes in operation
Figure 7: Illustration of MIG (gas-shield) and MMA (manual) welding modes.

7.2 Current and Voltage Adjustment

  • The Current Adjustment Knob (Min/Max) allows you to set the welding current within the 20-120A range. The selected current will be displayed on the digital current indicator.
  • For MIG welding, the voltage adjustable knob (often integrated with wire feed speed control) helps fine-tune the arc characteristics.

7.3 Reference Table of Welding Current Setting

The following table provides recommended welding current and voltage settings based on electrode diameter. These are general guidelines; actual settings may vary depending on material thickness, joint type, and welding position.

Table of recommended welding current and voltage settings by electrode diameter
Figure 8: Recommended welding current and voltage settings.
Welding Current Setting Reference
Electrode Dia. (mm)Recommended Welding Current (A)Recommended Welding Voltage (V)
1.020~6020.8~22.4
1.644~8421.76~23.36
2.060~10022.4~24.0
2.580~12023.2~24.8
3.2108~14823.32~24.92
4.0140~18024.6~27.2
5.0180~22027.2~28.8

Note: The output current adjustment range for this machine is 20-120A.

8. Maintenance

  • Regular Cleaning: Periodically clean the machine, especially the cooling fan and ventilation openings, to prevent dust and debris buildup. Use compressed air to blow out internal components.
  • Check Connections: Regularly inspect all electrical connections, including power cables, welding cables, and torch connections, for tightness and signs of wear or damage.
  • Wire Feeder Maintenance: Keep the wire feed mechanism clean and free of debris. Check the drive rollers for wear and ensure proper tension.
  • Torch and Holder: Clean the MIG torch nozzle, contact tip, and diffuser regularly. Replace worn parts as needed. For MMA, ensure the electrode holder jaws are clean and provide good contact.
  • Storage: Store the welding machine in a dry, clean environment when not in use.

9. Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Machine does not power onNo power supply; Power switch off; Internal fuse blownCheck power cord and outlet; Turn power switch ON; Consult qualified technician for fuse replacement.
No welding arc (MMA)Poor earth clamp connection; Electrode not making contact; Incorrect current settingEnsure good contact with workpiece; Check electrode position; Adjust current.
No wire feed (MIG)Wire tangled or jammed; Drive rollers not engaged; Wire feed motor issue; Contact tip blockedCheck wire path; Ensure rollers are engaged and tensioned; Clean/replace contact tip.
Poor weld qualityIncorrect settings (current/voltage/wire speed); Improper technique; Contaminated workpieceAdjust settings according to material; Practice welding technique; Clean workpiece thoroughly.
Over-temperature/Over-current protection activatedMachine overheated due to prolonged use or blocked ventilation; Excessive current drawAllow machine to cool down; Ensure ventilation is clear; Reduce welding current if consistently tripping.

10. User Tips

  • Gas for MIG: The machine is described as "Inert Gas Shielded". For true MIG welding (using solid wire), an external gas cylinder (e.g., Argon or Argon/CO2 mix) and regulator are required. If using flux-cored wire, it operates gasless.
  • Material Compatibility: The machine is suitable for low carbon steel, medium carbon steel, and alloy steel. While some users inquire about stainless steel, the product description does not explicitly list it. Always verify compatibility with your specific welding wire and material.
  • Portability: The machine is designed to be small, lightweight, and compact, and includes a shoulder strap for easy carrying. This makes it convenient for various job sites.
Person carrying the compact welding machine with a shoulder strap
Figure 9: The welding machine's compact design and portability.

11. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact details provided by your retailer or the manufacturer's official website. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.