1. Introduction
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your JASIC NBC-500 (N215II) MIG Gas Protected Welder. This multi-purpose machine supports MIG (Gas-Shielded), TIG (Wipe-Arc Argon), and MMA (Manual) welding modes, offering high efficiency and reliability for various welding tasks.

2. Safety Information
Always prioritize safety when operating welding equipment. Failure to follow safety guidelines can result in serious injury or death.
- Electric Shock: Welding current can cause fatal electric shock. Ensure proper grounding, wear dry gloves, and insulate yourself from the workpiece and ground.
- Fumes and Gases: Welding produces fumes and gases that can be hazardous to health. Work in a well-ventilated area or use local exhaust ventilation.
- Arc Rays: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- Fire and Explosion: Welding sparks and hot materials can cause fire or explosion. Keep flammable materials away from the welding area.
- Hot Parts: Hot metal parts can cause severe burns. Allow welded materials to cool before handling.
Refer to relevant national and local safety standards for comprehensive safety practices.
3. Package Contents
Upon unpacking, verify that all components are present and undamaged:
- JASIC NBC-500 (N215II) Main Power Source
- External Wire Feeder
- MIG Torch
- Earth Clamp
- Electrode Holder (for MMA)
- Gas Hose
- User Manual (this document)
- Additional accessories (e.g., spare nozzles, contact tips, gas regulators - may vary by package)

4. Product Features
The JASIC NBC-500 (N215II) welder incorporates advanced technology for superior performance:
- IGBT Inversion Technology: Blade module IGBT inversion ensures high efficiency, stable output, and reliability.
- Multi-Process Capability: Supports MIG (Gas-Shielded), TIG (Wipe-Arc Argon), and MMA (Manual) welding modes.
- User-Friendly Operation: Unified regulation for gas-shielded welding simplifies setup and use.
- Optimized Arc Performance: Specially optimized arc initiation function and post-weld balling circuit enhance arc initiation success rate.
- Efficient Wire Feeding: Features fast wire feeding, high load sustainability, and high-speed welding capabilities.
- Smart Gas Saving: An intelligent self-control airflow system reduces gas consumption by 10-20%.
- Reduced Welder Fatigue: Two-step/four-step operation modes help decrease operator labor intensity.
- Smart Fan System: Energy-saving fan reduces noise, minimizes dust entry, and extends fan lifespan.

5. Setup
Follow these steps for initial setup:
- Power Connection: Connect the welder to a three-phase AC 380V ± 15% power supply. Ensure the power source is capable of handling the rated input capacity of 27.1 kVA.
- Wire Feeder Connection: Connect the external wire feeder to the main power source using the provided cables.
- Gas Connection (for MIG/TIG): Attach the gas hose from your shielding gas cylinder (e.g., CO2, Argon, or mixed gas) to the gas inlet on the welder. Ensure all connections are secure and leak-free.
- Torch and Earth Clamp Connection: Connect the MIG torch or TIG torch/MMA electrode holder and the earth clamp to their respective terminals on the welder.
- Wire Installation (for MIG): Install the welding wire into the wire feeder according to the wire feeder's instructions, ensuring the correct drive rollers and contact tip size are used for your wire diameter (0.8mm, 1.0mm, or 1.2mm).
- Check Controls: Familiarize yourself with the control panel. The NBC-500 features a digital display and control knobs for current, voltage, and other parameters.


6. Operating Modes
The NBC-500 (N215II) supports three primary welding processes:
6.1. MIG Welding (Gas-Shielded)
MIG welding is ideal for fast, efficient welding of carbon steel. The machine offers unified regulation for simplified parameter setting.
- Current Range: 50-500 A
- Voltage Range: 13-48 V
- Wire Feed Speed: 1.5-24 m/min
- Wire Diameter: Compatible with 0.8mm, 1.0mm, 1.2mm solid wires.
- Operation: Select MIG mode, set desired current and voltage, ensure gas flow, and begin welding. Utilize the two-step/four-step trigger function as needed.
6.2. TIG Welding (Wipe-Arc Argon)
This mode provides precise welding for thinner materials and offers a cleaner finish.
- Current Range: 50-500 A
- Arc Initiation: Contact arc initiation.
- Operation: Select TIG mode, connect TIG torch, ensure Argon gas flow, set current, and initiate arc by touching the tungsten electrode to the workpiece.
6.3. MMA Welding (Manual Metal Arc)
MMA welding is versatile for various applications and environments, especially outdoors or where gas shielding is impractical.
- Current Range: 50-500 A
- Thrust Current: 0-100 (adjustable for arc force control).
- Operation: Select MMA mode, connect electrode holder and earth clamp, insert appropriate electrode, set current and thrust, and strike the arc.

7. Specifications
| Category | Parameter | Value |
|---|---|---|
| Model | Model Name | NBC-500 (N215II) |
| Input | Input Voltage (V) | Three-phase AC 380V ± 15% |
| Rated Input Capacity (kVA) | 27.1 | |
| Power Factor | 0.91 | |
| Output | Rated No-Load Voltage (V) | 71 |
| MIG Welding | Welding Current (A) | 50-500 |
| Welding Voltage (V) | 13-48 | |
| Gas Meter Heater Voltage (V) | 36 | |
| Wire Feed Speed Range (m/min) | 1.5-24 | |
| MIG Solid Wire Diameter (mm) | 0.8mm, 1.0mm, 1.2mm | |
| TIG Welding | Welding Current (A) | 50-500 |
| Arc Initiation Mode | Contact Arc Initiation | |
| MMA Welding | Welding Current (A) | 50-500 |
| Thrust Current | 0-100 | |
| Performance | Rated Load Sustainability @40℃ | 40% |
| Efficiency | 88.9% | |
| Protection Level | IP21S | |
| Insulation Level | H | |
| Physical (Main Unit) | Dimensions L*W*H (mm) | 702*303*526 |
| Weight (kg) | 37.1 | |
| Package Size L*W*H (mm) | 813*373*610 | |
| Gross Weight (kg) | 40.3 | |
| Physical (Wire Feeder) | Dimensions L*W*H (mm) | 460*200*280 |
| Weight (kg) | 8.9 | |
| Package Size L*W*H (mm) | 540*375*420 | |
| Gross Weight (kg) | 21.8 | |
| Material Processed | Material / Metal Processed | Carbon Steel |
8. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your welder:
- Daily Checks: Inspect cables, connections, and torches for damage. Ensure proper gas flow and wire feed.
- Cleaning: Keep the machine clean and free of dust and debris. The smart fan system helps, but periodic external cleaning is recommended.
- Air Filter: If applicable, clean or replace air filters to maintain proper cooling.
- Consumables: Regularly check and replace MIG contact tips, nozzles, and TIG tungsten electrodes as they wear out.
- Wire Feeder: Clean the wire feeder rollers and liner to prevent wire feeding issues.
- Storage: Store the welder in a dry, dust-free environment when not in use.
9. Troubleshooting
Here are some common issues and their potential solutions:
- No Power: Check power supply connection, circuit breaker, and ensure the welder's power switch is on.
- No Arc: Verify earth clamp connection, torch connection, correct welding mode selection, and proper parameter settings. For MIG, check wire feed and contact tip. For MMA, ensure electrode is dry and suitable.
- Poor Arc Stability: Check for proper gas shielding (if applicable), correct wire feed speed, clean contact tip, and appropriate voltage/current settings.
- Wire Feeding Issues (MIG): Inspect wire spool for tangles, check drive rollers for proper tension and cleanliness, ensure liner is not clogged or kinked, and verify contact tip size matches wire diameter.
- Overheating: Allow the machine to cool down. Ensure adequate ventilation around the welder and that the smart fan is operating correctly. Do not exceed the rated duty cycle.
If problems persist, contact customer support.
10. User Tips
- Practice Makes Perfect: Spend time practicing on scrap metal to get a feel for the machine's settings and your chosen welding process.
- Material Preparation: Always clean the workpiece thoroughly before welding to remove rust, paint, or grease. This significantly improves weld quality.
- Gas Flow Rate: For MIG/TIG, ensure your gas flow rate is appropriate for the welding environment and material thickness to prevent porosity.
- Wire Stick-Out (MIG): Maintain a consistent wire stick-out for stable arc and good penetration.
- Electrode Angle (MMA): Experiment with different electrode angles to find what works best for your specific joint and electrode type.
11. Warranty and Support
Your JASIC NBC-500 (N215II) welder comes with comprehensive warranty and support:
- Complete Goods Warranty: 1 year from the date of purchase.
- Core Parts Warranty: 3 years from the date of purchase.
- Support Services:
- 24-hour online customer service for timely replies.
- Video online technical support.
- Provision of free spare parts.
Contact Information:
Contact Person: Wang Min
Telephone: 0086-135 6291 3038
WeChat: 17353975288
E-mail: wm13562913108@163.com
