1. Introduction
The Megarevo R6KL1 Hybrid Inverter is a sophisticated energy storage solution designed for off-grid solar systems. It provides a pure sine wave output, ensuring compatibility with sensitive electronic devices. This inverter integrates multiple functions, including solar charging, AC/DC inversion, and battery management, to deliver a reliable and efficient power supply. It is suitable for various residential and commercial applications, offering flexibility with different power ratings (3kW, 5kW, 6kW) and compatibility with both lead-acid and lithium-ion batteries.

Figure 1: Megarevo REVO series residential Energy Storage inverters.
2. Safety Instructions
Please read and understand all safety instructions before installation, operation, or maintenance of the Megarevo Hybrid Inverter. Failure to follow these instructions may result in electric shock, fire, or severe injury.
- Installation must be performed by qualified personnel in accordance with local electrical codes and regulations.
- Ensure the inverter is disconnected from all power sources (PV, battery, and grid) before performing any maintenance or wiring.
- Do not attempt to open or repair the inverter yourself. Refer all servicing to authorized service personnel.
- Keep the inverter away from flammable materials, moisture, and direct sunlight.
- Ensure proper ventilation around the inverter to prevent overheating.
- Use appropriate personal protective equipment (PPE) during installation and maintenance.
3. Product Features
The Megarevo Hybrid Inverter offers a range of advanced features for optimal performance and reliability:
- Full digital voltage and current double closed-loop control with advanced SPWM technology for pure sine wave output.
- Two output modes: mains bypass and inverter output, ensuring uninterrupted power supply.
- Four available charging modes: Only Solar, Mains Priority, Solar Priority, and Mains & Solar hybrid charging.
- Advanced MPPT technology with an efficiency of 99.9%.
- Designed with an LCD screen and indicators for dynamic display of system data and operating status.
- ON/OFF rocker switch for AC output control.
- Power saving mode to reduce no-load loss.
- Intelligent variable speed fan for efficient heat dissipation and extended system life.
- Lithium battery activation design, allowing access for both lead-acid and lithium batteries.
- 360° all-round protection with multiple functions including short circuit, over-voltage, under-voltage, overload, and reverse protection.
- Support for multi-parallel connection for increased capacity.
- Flexible access for diesel generators.
- Intelligent EMS management function.
- On/off-grid automatic switching function to ensure uninterrupted power for critical loads.

Figure 2: Megarevo Hybrid Inverter R6KL1 highlighting key features.
4. Component Identification
Familiarize yourself with the various ports, switches, and indicators on your Megarevo Hybrid Inverter.

Figure 3: Inverter connection ports and display panel.
4.1. Bottom Panel Connections
- Overload Protector
- ON/OFF Rocker Switch
- AC Input Port
- AC Output Port
- RS485-2 Communication Port (for BMS)
- Current Sharing Port (only applies to parallel modules)
- Communication Port (only applies to parallel modules)
- USB Communication Port
- RS485-1 Communication Port
- Dry Contact Port
- Cooling Fan
- Battery Port
- Cooling Fan
- PV Port
4.2. Display Panel
- Light Touch Button
- Indicator Light
- LCD Screen
5. Setup and Installation
Proper installation is critical for the safe and efficient operation of your hybrid inverter. This section provides a general overview of the system connections. Always refer to the detailed wiring diagrams and consult a qualified electrician for installation.
5.1. System Overview
The Megarevo Hybrid Inverter integrates solar PV input, battery storage, grid connection, and load management. The system is designed to prioritize solar energy, store excess energy in batteries, and use grid power as a backup or to supplement when solar is insufficient.

Figure 4: Megarevo Hybrid Inverter System Diagram.
5.2. Connection Steps
- Mounting: Securely mount the inverter in a well-ventilated area, away from direct sunlight and moisture. Ensure adequate clearance for cooling.
- PV Connection: Connect your solar panels (PV) to the PV Ports (14) on the inverter. Ensure correct polarity (PV1+, PV1-, PV2+, PV2-) and that the PV voltage and current are within the inverter's specifications.
- Battery Connection: Connect the battery bank to the Battery Port (12). Observe correct polarity. The inverter is compatible with 48V lithium and lead-acid batteries.
- AC Input (Grid) Connection: Connect the utility grid power to the AC Input Port (3). This allows the inverter to draw power from the grid or feed excess solar power back to it, depending on the operating mode.
- AC Output (Load) Connection: Connect your electrical loads to the AC Output Port (4). You can differentiate between 'Important Load' (critical appliances) and 'Normal Load' in your system design.
- Communication Connections: Connect communication cables for BMS (RS485-2, port 5), parallel modules (ports 6, 7), USB (port 8), and other monitoring systems (RS485-1, port 9, Dry Contact Port, port 10). The Cloud Platform can be accessed via these communication interfaces.
- Grounding: Ensure the inverter is properly grounded using the Grounding Screw Hole.
- Initial Power-Up: After all connections are verified, switch on the PV Switch, then the Battery, and finally the AC Input. Turn the ON/OFF Rocker Switch (2) to 'ON' for AC output control.
6. Operating Instructions
The Megarevo Hybrid Inverter features an intuitive LCD screen (18) and light touch buttons (16) for monitoring and configuration. The indicator lights (17) provide quick status updates.
6.1. Display and Navigation
The LCD screen displays real-time system data, including PV voltage, battery status, AC input/output, and operational mode. Use the light touch buttons to navigate through menus and adjust settings.
6.2. Charging Modes
The inverter supports four distinct charging modes, configurable via the LCD interface:
- Only Solar: The battery is charged exclusively by solar power.
- Mains Priority: The grid (mains) is the primary source for charging the battery and powering loads. Solar power is used when the grid is unavailable or as a supplement.
- Solar Priority: Solar power is the primary source for charging the battery and powering loads. The grid is used only when solar power is insufficient.
- Mains & Solar Hybrid Charging: Both grid and solar power are used to charge the battery and power loads, optimizing energy usage based on availability and system settings.
6.3. Power Saving Mode
Activate the power saving mode to reduce the inverter's no-load power consumption, enhancing overall system efficiency.
7. Maintenance
Regular maintenance ensures the longevity and optimal performance of your Megarevo Hybrid Inverter.
- Cleaning: Periodically clean the exterior of the inverter and the cooling fans (11, 13) to prevent dust buildup, which can impede cooling. Use a dry, soft cloth. Do not use liquid cleaners.
- Connection Checks: Annually inspect all electrical connections (PV, battery, AC input/output, communication ports) for tightness and signs of corrosion. Tighten any loose connections.
- Environmental Inspection: Ensure the installation environment remains free from excessive dust, moisture, and extreme temperatures. Verify that ventilation is not obstructed.
- Battery Health: Monitor battery voltage and temperature regularly. Follow the battery manufacturer's maintenance guidelines.
- Firmware Updates: Check the manufacturer's website for any available firmware updates to ensure your inverter has the latest features and bug fixes.
8. Troubleshooting
This section provides solutions to common issues. For problems not listed here or if issues persist, contact technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Inverter not powering on | No PV input; Battery disconnected or low voltage; AC input unavailable; ON/OFF switch off. | Check PV connections and sunlight; Verify battery voltage and connections; Check grid power; Ensure ON/OFF Rocker Switch is in 'ON' position. |
| No AC output | Overload; Output short circuit; Inverter fault. | Reduce load; Check for short circuits in wiring; Check LCD for error codes and contact support if fault persists. |
| Battery not charging | PV input too low; Charging mode incorrect; Battery fault. | Check PV input voltage/current; Verify charging mode settings; Inspect battery connections and health. |
| High temperature alarm | Insufficient ventilation; Ambient temperature too high; Fan malfunction. | Ensure clear airflow around inverter; Relocate inverter if ambient temperature is consistently high; Check cooling fans for operation. |
| Communication error | Loose communication cable; Incorrect settings. | Check all communication cable connections; Verify communication settings on the inverter and connected devices. |
9. Specifications
The following table details the technical specifications for the Megarevo Hybrid Inverter series:
| Datasheet | R3KL1 | R3K6L1 | R4KL1 | R4K6L1 | R5KL1 | R6KL1 |
|---|---|---|---|---|---|---|
| DC Input | ||||||
| Max. Input Power | 4600W | 6000W | 7000W | |||
| Start-up Voltage | 125V | |||||
| Max. PV Voltage | 500V | |||||
| PV Voltage Range | 125V-500V | |||||
| MPPT Range/Nominal | 125V-500V /360V | |||||
| Max. Input Current | 14A/14A | |||||
| MPPT Tracker/Strings | 2/1 | |||||
| AC Output | ||||||
| Rated Power W/VA | 3000VA/3000W | 3600VA/3600W | 4000VA/4000W | 4600VA/4600W | 5000VA/5000W | 6000VA/6000W |
| Max. Output Current | 13A | 16A | 17.4A | 20A | 21.7A | 26A |
| Nominal Voltage/Range | 230Vac /176Vac~270Vac | |||||
| Frequency | 50 /60Hz | |||||
| PF | 1(0.8lagging-0.8leading) | |||||
| THDI | < 3% | |||||
| AC Output Topology | L+N+PE | |||||
| Battery | ||||||
| Battery Voltage Range | 42~59V | |||||
| Max. Charging Voltage | 58V | |||||
| Charge/Discharge Current | 95A/62.2A | 95A/76.6A | 95A/83.3A | 95A/95.8A | 95A/110A | 95A/110A |
| Battery Type | Lithium /Lead-acid | |||||
| Communication Interface | CAN/RS485 | |||||
| EPS Output | ||||||
| Rated Power W/VA | 3000VA/3000W | 3600VA/3600W | 4000VA/4000W | 4600VA/4600W | 5000VA/5000W | 6000VA/6000W |
| Rated Voltage | 230Vac | |||||
| Rated Current | 13A | 16A | 17.4A | 20A | 21.7A | 26A |
| Rated Frequency | 50Hz | |||||
| Automatic Switchover Time | < 20ms | |||||
| THDU | < 2% | |||||
| Parallel Operation | Yes | |||||
| General Data | ||||||
| Battery Charge/Discharge Efficiency | 95% | |||||
| DC Max. Efficiency | 97.60% | |||||
| Euro Efficiency | 97% | |||||
| MPPT Efficiency | 99.90% | |||||
| Protection Class | IP65 | |||||
| Noise Emission (Typical) | < 35dB | |||||
| Operation Temperature | -25~+60℃ | |||||
| Cooling | Natural | |||||
| Relative Humidity | 0 ~95% (non-condensing) | |||||
| Altitude | 2000m | |||||
| Dimensions (W/D/H) mm | 550/200/515mm | |||||
| Weight | 25kg | |||||
| Inverter Topology | transformerless | |||||
| Self-Consumption | < 3W | |||||
| Features | ||||||
| Display | LCD | |||||
| Interface: RS485/Wi-Fi/LAN | Yes /Opt/Opt | |||||
| /CAN/DRM | /Yes/Yes | |||||
| Certificates | CE/INMETRO/TUV/VDE | |||||
10. User Tips
To maximize the performance and lifespan of your Megarevo Hybrid Inverter:
- Proper Sizing: Ensure your solar panel array and battery bank are appropriately sized for your energy consumption and the inverter's capacity.
- Regular Monitoring: Utilize the LCD display and communication interfaces (e.g., Wi-Fi monitoring) to regularly check system performance and identify any anomalies early.
- Battery Care: Follow recommended charging and discharging cycles for your specific battery type (lithium or lead-acid) to prolong battery life. Avoid deep discharges.
- Ventilation: Always ensure the inverter has unobstructed airflow for cooling. Overheating can reduce efficiency and lifespan.
- Professional Installation: While this manual provides guidance, professional installation is highly recommended to ensure safety and compliance with all electrical standards.
11. Warranty and Support
11.1. Warranty Information
The Megarevo Hybrid Inverter comes with a 2-year warranty, as specified in the product datasheet. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use and service conditions.
11.2. Technical Support
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact our support team:
- WhatsApp: +86 17352870921
- Email: w17770950324@gmail.com
When contacting support, please provide your inverter model number (R6KL1) and a detailed description of the issue.
12. Product Video Overview
Watch this short video for a visual overview of the Megarevo Hybrid Solar Inverter and its features.
Video 1: Overview of the Megarevo Hybrid Solar Inverter.