1. Product Overview
The DATAKOM D-500 is a next-generation genset control unit designed for diesel generator sets. It combines multi-functionality with wide communication possibilities, offering a reliable and cost-effective solution. This unit complies with and often exceeds the world's most stringent safety, EMC, vibration, and environmental standards for industrial applications.
Key features include an easy firmware upgrade process via the USB port. The Windows-based PC software facilitates monitoring and programming through USB, RS-485, Ethernet, and GPRS. Additionally, the PC-based Rainbow Scada software enables monitoring and control of an unlimited number of gensets from a single central location.

2. Product Features and Functionalities
The D500 MK3 controller offers a comprehensive set of features for efficient genset management:
2.1. Core Functionalities
- AMF (Automatic Mains Failure) unit with uninterrupted transfer
- ATS (Automatic Transfer Switch) unit with uninterrupted transfer
- Remote start controller
- Manual start controller
- Engine controller
- Remote display & control unit
- Waveform display of Voltage & Current (V & I)
- Harmonic analysis of Voltage & Current (V & I)
- Current Transformers (CTs) at genset or load side
2.2. Communication Options
- Ethernet
- GSM-GPRS
- Internal GPRS modem (optional)
- Embedded web server
- Web programming
- GSM-SMS
- Modbus RS-485
- Modbus TCP/IP
- SNMP
- USB Host (optional)
- USB Device
- RS-485
- RS-232 (optional)
- Micro SD card slot (optional)
- J1939-CANBUS
2.3. Supported Topologies
- 2 phases 3 wires, L1-L2
- 2 phases 3 wires, L1-L3
- 3 phases 3 wires, 3 CTs
- 3 phases 3 wires, 2 CTs (L1-L2)
- 3 phases 3 wires, 2 CTs (L1-L3)
- 3 phases 4 wires, star
- 3 phases 4 wires, delta
- 1 phase 2 wires

3. Technical Specifications
| Attribute | Value |
|---|---|
| Model Number | D500 MK3 original |
| Brand Name | DATAKOM |
| Origin | Mainland China |
| Power Input | 8-36VDC, 500mA max |
| Frequency Range | 0-600 Hz |
| Package Type | Carton |
| Approximate Length | 25 cm |
| Approximate Width | 15 cm |
| Approximate Height | 8 cm |
| Approximate Weight | 1.5 kg |
| High-concerned chemical | None |
| Customization | Yes (isCustomized) |
4. Setup and Installation
The D500 MK3 controller is designed for panel mounting. Ensure the mounting location is free from excessive vibration, moisture, and extreme temperatures. Proper ventilation is crucial for optimal performance.
4.1. Model Variants
The D500 family units are available with various options and peripheral features. Refer to the diagram below to identify the correct version and its specific functionalities:

- Family Code (D500): Base model identifier.
- -M: Indicates the unit is equipped with an Internal GSM-GPRS module.
- -C: Indicates the unit includes USB-Host, RS-232, and a micro-SD card slot.
- -G: Indicates the unit comes with a Sealing gasket for enhanced protection.
- -T: Indicates the unit has a Conformal Coating for environmental resistance.
- -00: Standard unit variant. Codes 01-99 denote customer-specific products.
4.2. Wiring and Connections
All electrical connections are made via the terminal blocks located on the rear of the controller. Ensure all power is disconnected before attempting any wiring.

Key Connection Points:
- BAT+, BAT-: Main power supply input (8-36VDC).
- OUT1-6: Configurable digital outputs for various control functions.
- IN1-18: Configurable digital inputs for monitoring and control signals.
- SENSORS (G-L1-52 to M-L3-74): Connections for generator and mains phase voltage sensing, and other analog inputs.
- EXPANSION: Includes ports for USB (Type B), RS-485, and CANBUS for communication and programming.
- Optional Plug-in Modules: Four dedicated slots for additional functionality modules.
Refer to the detailed wiring diagrams in the full product manual for specific connection layouts for your application.
5. Operation
The D500 MK3 features an intuitive front panel with a display and control buttons for easy operation and monitoring.
5.1. Front Panel Controls
- Display Screen: Shows generator phase voltages (L1, L2, L3), status indicators (STATUS, AUTO READY, ALARM, WARNING, SERVICE REQUEST), and other operational data.
- TEST Button (Yellow): Initiates a test sequence.
- AUTO Button (Green): Activates automatic operation mode.
- MAN (Manual) Button: Activates manual operation mode.
- STOP Button (Red): Stops the generator.
- RUN Button (Green): Starts the generator in manual mode.
- Navigation Buttons (Up, Down, PGM, etc.): Used for menu navigation and parameter programming.
- Indicator Lights: Provide visual feedback for Mains, Load, Genset status, and battery.
For detailed programming and advanced operational modes, consult the comprehensive software manual and the device's internal menu structure.
6. Maintenance
The DATAKOM D500 MK3 controller is designed for minimal maintenance. However, regular checks can ensure its longevity and reliable operation:
- Cleaning: Keep the unit clean and free from dust and debris. Use a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Connections: Periodically check all wiring connections for tightness and signs of corrosion. Loose connections can lead to intermittent operation or damage.
- Firmware Updates: Ensure the controller's firmware is up-to-date. Firmware updates can provide new features, performance improvements, and bug fixes. These can typically be performed via the USB port using the Windows-based PC software.
- Environmental Conditions: Ensure the operating environment remains within specified temperature and humidity ranges to prevent damage.
7. Troubleshooting
This section provides general guidance for common issues. For complex problems, refer to the full technical manual or contact support.
7.1. Common Issues and Solutions
- Controller Not Powering On:
- Check the DC power supply (8-36VDC) to BAT+ and BAT- terminals.
- Verify fuse integrity in the power supply line.
- Generator Fails to Start:
- Ensure the controller is in AUTO or MAN mode.
- Check engine fault indicators (e.g., low oil pressure, high temperature).
- Verify fuel supply and battery charge.
- Inspect start/stop wiring connections.
- Incorrect Voltage/Frequency Readings:
- Check connections to voltage and frequency sensing inputs (G-L1-52 to M-L3-74).
- Ensure CTs are correctly installed and wired.
- Verify controller settings for generator and mains parameters.
- Communication Issues (USB, RS-485, Ethernet):
- Check physical cable connections.
- Verify communication settings (baud rate, IP address, etc.) in the controller and PC software.
- Ensure correct drivers are installed for USB communication.
If the problem persists after attempting these solutions, it is recommended to consult a qualified technician or DATAKOM support.
8. User Tips
- Always back up your controller's configuration settings before performing firmware updates or major parameter changes.
- Utilize the PC software for easier and more comprehensive programming and monitoring, especially for complex setups.
- Regularly check the status indicators on the front panel for early detection of potential issues.
9. Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact your authorized DATAKOM distributor. Technical support can be obtained through your supplier or directly from DATAKOM's official channels.
For the most up-to-date information, software, and detailed manuals, please visit the official DATAKOM website.