1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Prelingcar 12.3-inch Digital Cluster Dashboard. Designed specifically for Audi Q3 models from 2011 to 2018, this LCD panel speedometer transforms your vehicle's cockpit into a modern virtual display. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Figure 1: Prelingcar 12.3-inch Digital Cluster Dashboard
2. Safety Information
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Always ensure the vehicle is turned off and the battery is disconnected before performing any installation or maintenance procedures. Improper installation can lead to vehicle damage or personal injury.
3. Specifications
| Feature | Specification |
|---|---|
| Screen Size | 12.3 inches |
| Resolution | 1920*720 |
| Operating System | Linux |
| Power | 4*45W |
| Voltage | 12V |
| Material Type | Metal and ABS Plastic |
| Item Weight | 3.5 kg |
| Item Height | 20 cm |
| Item Width | 30 cm |
| Item Length | 40 cm |
| Placement on Vehicle | Dashboard |
| Special Features | 12.3 inch LED digital display |
| Compatibility | Audi Q3 (2011-2018) |
| Certification | CE |
| Origin | Mainland China |
4. Package Contents
- 1 x Prelingcar 12.3-inch Digital Cluster Dashboard Unit
- 1 x Assembly Tool Kit
- Necessary connection cables (HDMI cable, HDMI exchange box, USB cable for Android player)
5. Setup and Installation
5.1. Pre-Installation Steps
- **Review Installation Video**: For detailed installation instructions, please refer to the video available on Google Drive: Installation Video Link. Search for your specific car model on this website for detailed modification steps.
- **Vehicle Settings**: Set the speed limit and turn off winter tire settings in your original car system. If your original car does not have speed limit or winter tire type settings, this step is not necessary.
- **Speed Limit Alarm**: Set the speed limit alarm to 250 km/h.
- **Retain Original Buzzer**: If your old dashboard board has a buzzer, please keep the original car motherboard buzzer. Otherwise, alarm sounds or other functions may not work correctly.
- **Retain Small Motherboard**: Keep the original car motherboard small motherboard as shown in the picture if your old cluster has it.
Figure 2: Original motherboard components to retain
5.2. Installation Process
The Prelingcar Digital Cluster Dashboard is designed for non-destructive installation, ensuring no damage to your original car's wiring or warranty. It features a plug-and-play interface, meaning no complex coding or programming is required. The system retains original car information functions.
Figure 3: Non-destructive installation, retaining original car information function (no unbroken line, solderless, no-drill)
After physical installation, the new instrument panel will seamlessly integrate with your vehicle's existing systems, providing a brand new instrument appearance with ultra-clear screen resolution.
Figure 4: After installation effect, showing new instrument appearance and clear screen.
6. Operating Instructions
6.1. Initial Setup (After Installation)
- **Fuel Tank Set**: If the fuel tank level is not accurate, first fill the tank completely. Then proceed with the setup, remembering the full tank value. Enter the values in the settings.
- **Car Type Set**: Go to the settings menu, select 'Car Type', and choose your specific Audi Q3 model (e.g., Q3 2011-2018). After selection, turn off the engine, turn off the power, lock the car, and wait for 5 minutes before restarting. The system will then be ready for operation.
- **Speed Calibration**: In the dashboard settings, navigate to 'Calibration Settings' and select the second item. Enter the difference between the displayed speed and the actual speed to calibrate the average speed value.
- **Consumption Set**: In the dashboard settings, go to 'Calibration Settings' and select the third item. Change the setting to 'Manual' and enter the difference between the actual consumption and the displayed consumption to calibrate the average consumption value.
- **Preference Set**: Access the 'Performance' section for various small settings, including: Voltage display frequency, Reverse left and right, Width indicator light, Move up and down, Move left and right, Zoom ratio, Time Source, Race mode, Boot Sound, Tire pressure, Check Mil, Phone mirror, and OBD Silence.
- **Unit Set (PQ Platform)**: Configure units for temperature, pressure, time, distance, vehicle speed, volume, and consumption.
- **Language Set**: Navigate to 'Settings' > 'Language Setting'. You can choose from 14 different language options.
- **LHD/RHD Configuration Set**: If your vehicle is Right-Hand Drive (RHD), go to the configuration settings and adjust it to LHD or RHD as appropriate.
- **CarPlay / Android Auto Connection**: Go to the 'CarPlay' option. Once connected, press down to access a menu for adjusting the region or switching devices (CarPlay / AirPlay / Android Auto / HiCar). For Android phones, select 'Android Auto' and connect via Bluetooth.
- **HDMI Connection**: Connect the HDMI port on the digital cluster to an HDMI cable, then connect the HDMI cable to an HDMI exchange box. Finally, connect the HDMI exchange box to the USB port of your Android player (as shown in the diagram). After a successful connection, open the digital cluster and go to the navigation interface. Press the down button to activate.
- **Trip Set**: Go to 'Travel Data', press OK, and choose to reset the trip. Confirm with 'OK'.
- **Theme Set**: Go to 'Settings' > 'Theme', enter 'Interior', and select either 'A8' or 'A7' UI theme. Press OK to apply.
- **Physical Light Set**: Normally, keep the 'Physical Light' setting closed. It is only necessary to open this for rare car models that have a physical light in the digital cluster.
- **Radio Display Zone Set**: In 'Settings' > 'Preference', access 'Zoom Radio' and adjust the display zone from 1.0 to 0.** as desired.
6.2. Key Features and Functions
- **Multiple UI Interfaces**: The dashboard offers multiple UI interfaces and themes, allowing you to personalize the display style.
- **Fast Startup**: Experience a quick response and fast startup, with the instrument panel ready in less than 3 seconds from car ignition.
- **LinuxOS System**: The dashboard runs on a LinuxOS system, ensuring stable and smooth performance without delay or lag.
- **Automotive Grade Chip**: Built with an automotive-grade chip, the unit is resistant to high temperatures up to 80 degrees Celsius and low temperatures down to minus 40 degrees Celsius, ensuring reliability in various climates.
- **Steering Wheel Control**: The system supports original vehicle steering wheel controls, making it more comfortable and intuitive to use.
- **SYNC Display Cable**: An optional SYNC display cable (sold separately) can connect your Android player to the digital cluster, supporting rear camera, 360-degree camera, DVR, Carplay, and Android Auto displays directly on the digital cluster.
- **Multi-Language Support**: The system supports multiple languages, including Chinese (Simplified), Chinese (Traditional), Arabic, Russian, French, Korean, Japanese, Turkish, Spanish, Italian, and English.
- **Enhanced Driving Safety**: The digital cluster provides a direct view of all information, reducing the need to look away from the center console and promoting safer, more focused driving.
Figure 5: Multiple UI interfaces and themes available.
Figure 6: Fast 2-second startup for quick readiness.
Figure 7: LinuxOS system for stable and smooth operation.
Figure 8: Automotive Grade Chip for extreme temperature resistance.
Figure 9: Support for original steering wheel control buttons.
Figure 10: SYNC display cable for integrating various camera and phone functions.
Figure 11: Multi-language options for user interface.
Figure 12: Direct vision for safer driving.
6.3. UI Demonstration Video
Video 1: Demonstration of the various UI options and settings on the digital cluster.
7. Maintenance
To ensure the longevity and optimal performance of your digital cluster dashboard, follow these simple maintenance guidelines:
- **Cleaning**: Use a soft, dry, lint-free cloth to gently wipe the screen. Avoid using abrasive cleaners, solvents, or spray cleaners directly on the screen, as they may damage the display.
- **Avoid Liquids**: Do not expose the unit to excessive moisture or liquids. If liquid spills on the unit, immediately power off the vehicle and wipe it dry.
- **Temperature**: While the unit is designed for extreme temperatures, prolonged exposure to direct sunlight or extreme heat/cold when the vehicle is off can affect its lifespan.
8. Troubleshooting
- **No Alarm Sound / Functionality Issues**: Ensure that the original car motherboard buzzer and small motherboard were retained during installation, as instructed in Section 5.1.
- **CarPlay/Android Auto Connection Problems**: Verify that Bluetooth is properly connected between your phone and the digital cluster. Check the 'CarPlay' settings for correct region and device selection.
- **No HDMI Display**: Confirm that all HDMI cables are securely connected from the digital cluster to the HDMI exchange box and then to the Android player's USB port. Ensure the navigation interface is selected on the digital cluster.
- **Display or UI Glitches**: If you experience unexpected display behavior or UI issues, try restarting the vehicle. If the problem persists, check for available firmware updates or contact customer support.
9. User Tips
- **Retain Original Components**: As highlighted in the installation section, keeping the original car's motherboard buzzer and small motherboard is crucial for full functionality.
- **Explore UI Options**: The system offers many UI options and settings. Take time to explore them to personalize your dashboard experience to your preference.
- **Language Customization**: While the system supports many languages, if you notice any translation or font issues (e.g., with Russian text), consider checking for updates or contacting support for potential improvements.
- **Utilize Support**: If you encounter any issues during installation or operation, the seller's support team is available to provide assistance.
10. Warranty and Support
Your Prelingcar Digital Cluster Dashboard comes with a 2-year warranty from the date of receipt. We are committed to providing a personalized experience and ensure all products pass strict quality tests before shipment.
- **Customer Service**: 24-hour customer service is available to assist with any questions or issues.
- **Technical Support**: An engineer team is available to help with installation and technical queries.
- **Software Updates**: We provide free updates for firmware, software, UI, and GPS navigation maps to enhance your product experience.
- **Quality Assurance**: The product has undergone multi-channel quality inspection and holds relevant certifications.
Figure 13: Quality inspection and certification details.