1. Introduction
Thank you for choosing the WJCOOLMAN Rhythm PLUS ATX Desktop Computer Case. This high-performance chassis is designed for gamers and PC enthusiasts, featuring a 360° transparent side panel, support for water cooling, and a modern Bauhaus-inspired aesthetic. This manual provides essential information for the proper setup, operation, and maintenance of your new computer case to ensure optimal performance and longevity.
2. Safety Information
- Always disconnect the power supply from the wall outlet before installing or removing any components.
- Handle all components with care to prevent damage from static electricity. Use an anti-static wrist strap if available.
- Keep the case away from liquids and excessive moisture.
- Ensure proper ventilation around the computer case to prevent overheating.
- Do not attempt to modify the case or its components in any way not described in this manual.
- Keep small parts and tools out of reach of children.
3. Product Overview
The Rhythm PLUS case offers a spacious interior and a sleek, modern design, perfect for showcasing high-end components. Its key features include:
- 360° Transparent Side Panels: Tempered glass panels provide a full view of your internal components.
- Optimized Airflow: Designed for efficient heat dissipation with multiple fan mounting options.
- Water Cooling Support: Compatible with 360mm water cooling radiators.
- Vertical GPU Mounting: Supports vertical installation of graphics cards (extension cord sold separately).
- Voice-Activated Lighting: Built-in acoustic sensor allows the light bar to synchronize with music.
- Tool-Free Access: Hinge-type side panels for easy component installation and maintenance.
Components and Features







4. Specifications
| Feature | Specification |
|---|---|
| Product Name | Rhythmic PLUS |
| Chassis Dimensions (L*W*H) | 415 * 280 * 440MM |
| Material | SPCC Tempered Glass |
| Motherboard Compatibility | ITX / M-ATX / ATX |
| Expansion Slots | 7 |
| Front Ports | USB3.0 * 2, Type-C, HD Audio |
| Hard Disk Bays | 3.5" HDD * 2; 2.5" SSD * 4 |
| CPU Radiator Height Limit | 163mm |
| Graphics Card Length Limit | 400mm |
| Power Supply Length Limit | 200mm |
| Fan Positions | Top: 3x 120mm (supports 360 water cooling) Motherboard Right Side: 3x 120mm (supports 360 water cooling) Rear: 1x 120mm Bottom: 3x 120mm |

5. Setup and Installation
Follow these steps to install your components into the Rhythm PLUS chassis:
5.1 Opening the Case
The side panels feature a hinge-type design for tool-free access. Gently open the tempered glass side panels to access the interior of the chassis.
5.2 Motherboard Installation
The Rhythm PLUS supports ITX, M-ATX, and ATX motherboards. Install your motherboard onto the standoffs, ensuring proper alignment with the I/O shield.

5.3 Graphics Card Installation
The case supports graphics cards up to 400mm in length. You can install your graphics card horizontally into the PCI-E slot or vertically using the standard vertical graphics card bracket. Note that a vertical extension cord for the graphics card needs to be purchased separately.
5.4 Storage Drive Installation
The chassis provides bays for 2x 3.5" HDDs and 4x 2.5" SSDs. The mechanical hard drives (3.5" HDDs) are installed behind the hard drive rack.

5.5 Fan and Radiator Installation
Install cooling fans and radiators in the designated positions:
- Top: Up to 3x 120mm fans, compatible with 360mm water cooling.
- Motherboard Right Side: Up to 3x 120mm fans, compatible with 360mm water cooling.
- Rear: 1x 120mm fan.
- Bottom: Up to 3x 120mm fans.

5.6 Connecting Front Panel I/O
Connect the cables from the front panel (USB 3.0, Type-C, HD Audio, Power, Reset, Light Mode Switch) to the corresponding headers on your motherboard.
6. Operating Instructions
6.1 Power On/Off
Press the Power Key located on the overhead interface to turn your computer on or off.
6.2 Light Mode Control
Use the Light Mode Switch Key on the overhead interface to cycle through different lighting effects. To synchronize the light bar with your motherboard's RGB software (divine light synchronization mode), press and hold the Light Mode Switch Key for two seconds until the prompt light flashes white twice.
6.3 Voice-Activated Lighting
The built-in acoustic sensor allows the sound panel light bar to react to music and audio, creating dynamic lighting effects.
7. Maintenance
7.1 Dust Filter Cleaning
The Rhythm PLUS features a bottom pull-out dust-proof net. Regularly remove and clean this filter to maintain optimal airflow and prevent dust buildup inside the case. Simply pull out the filter, clean it with water or a soft brush, and reinsert it once dry.
7.2 General Cleaning
- Use a soft, dry cloth to wipe down the exterior of the case, including the tempered glass panels.
- For interior cleaning, use compressed air to remove dust from fans and components. Ensure the system is powered off and unplugged before cleaning.
- Avoid using harsh chemicals or abrasive materials that could scratch the finish or glass.
8. Troubleshooting
If you encounter issues with your WJCOOLMAN Rhythm PLUS case, consider the following common solutions:
- No Power: Ensure all power cables (motherboard, CPU, GPU, storage drives) are securely connected. Verify the power supply is switched on and connected to a working outlet.
- Fans Not Spinning/Lighting Not Working: Check fan and RGB connections to the motherboard or RGB controller. Ensure all cables are properly seated. If using motherboard synchronization, confirm the correct mode is selected (refer to Section 6.2).
- Overheating: Verify all fans are spinning correctly and are oriented for optimal airflow (intake/exhaust). Clean dust filters and internal components. Ensure CPU cooler and GPU fans are functioning.
- Front Panel I/O Issues: Double-check the connections of the front panel cables to the motherboard headers. Ensure they are connected to the correct pins.
- Loose Components: If you hear rattling or notice instability, power down the system and check that all components (motherboard, GPU, drives, fans) are securely mounted.
For persistent issues, please contact customer support.
9. User Tips
- Cable Management: Utilize the ample space behind the motherboard tray and cable routing cutouts to keep cables tidy. This improves airflow and aesthetics.
- Component Compatibility: Always verify the dimensions of your CPU cooler, graphics card, and power supply against the case specifications before purchase to ensure a perfect fit.
- RGB Customization: Experiment with different lighting modes and motherboard synchronization options to personalize your build's appearance.
- Regular Cleaning: Make cleaning the dust filters a routine task to maintain optimal cooling performance and extend the lifespan of your components.
10. Warranty and Support
10.1 Returns Policy
This product is eligible for free returns within 90 days of purchase. Please refer to the seller's return policy for detailed terms and conditions.
10.2 Contact Support
For technical assistance, warranty claims, or any other inquiries, please contact our support team:
- WhatsApp/WeChat: Yvonne +86 18174450433 (Replies within 10 minutes)
- Email: 3841451120@qq.com (Replies within 8 hours)
Our support team is available in multiple languages, including English, Chinese, Spanish, Japanese, Portuguese, German, Arabic, French, Russian, Korean, Hindi, and Italian.