BAKON BK601S

Contents

Bakon BK601S Soldering Station User Manual

Model: BK601S | Brand: BAKON

1. Introduction

The Bakon BK601S is an integrated high-efficiency digital soldering station designed for professional use in electronics repair, micro welding, and general soldering tasks. Featuring PID temperature control technology, fast heating, and an ESD-safe design, it provides precise and stable temperature control for various applications. This manual provides essential information for the safe and effective operation and maintenance of your BK601S soldering station.

Bakon BK601S Soldering Station with soldering iron and accessories

The Bakon BK601S Soldering Station, ready for use.

2. Safety Precautions

Always observe the following safety precautions to prevent injury and damage to the equipment:

  • Ventilation: Use the soldering station in a well-ventilated area to avoid inhaling harmful fumes.
  • Eye Protection: Always wear safety glasses to protect your eyes from solder splashes.
  • Hot Surfaces: The soldering iron tip and heating element can reach very high temperatures. Avoid direct contact with skin.
  • ESD Safety: The BK601S is ESD safe. Ensure proper grounding practices are followed when working with sensitive electronic components.
  • Power Off: Always turn off and unplug the unit when not in use or before performing maintenance.
  • Flammable Materials: Keep flammable materials away from the soldering area.
  • Children: Keep out of reach of children.

3. Package Contents

Please check the contents of your package against the list below. If any items are missing or damaged, contact your supplier.

Set 1

  • Host (Soldering Station Unit) x 1
  • Handle (Soldering Iron) x 1
  • Soldering Iron Tips x 5
  • Tin Wire (30g) x 1
  • User Manual x 1
Contents of Bakon BK601S Set 1, including soldering station, iron, tips, and tin wire

Set 2

  • Host (Soldering Station Unit) x 1
  • Handle (Soldering Iron) x 1
  • Soldering Iron Tips x 3
  • BK1370 Heating Core x 2
  • Tin Wire (30g) x 1
  • User Manual x 1
Contents of Bakon BK601S Set 2, including soldering station, iron, tips, heating cores, and tin wire

4. Setup Instructions

Follow these steps to set up your Bakon BK601S Soldering Station:

  1. Unpack: Carefully remove all components from the packaging.
  2. Place Tin Wire: Install the tin wire roll onto the designated holder on the top of the station.
  3. Place Soldering Iron Tip: Place the soldering iron tip holder into its slot on the station.
  4. Connect Soldering Iron: Insert the soldering iron into the holder.
  5. Power Connection: Connect the power cord to the soldering station and then to a suitable power outlet (AC 110V 50Hz or AC 230V 50Hz, depending on your model).
  6. Prepare Sponge: Wet the dry sponge in the cleaning tray with water before use. This is crucial for cleaning the soldering iron tip.

Watch the video below for a visual guide on unboxing and basic setup:

Video: Unboxing and initial setup of the Bakon BK601S Soldering Station.

5. Operating Instructions

5.1 Power On and Initial Heating

  1. Ensure the station is properly set up and plugged in.
  2. Flip the power switch located at the back of the unit to the 'ON' position.
  3. The large LCD screen will display the current and set temperatures. The station will begin rapid warming to the last set temperature.
Bakon BK601S display showing PID temperature control and fast heating

The BK601S features PID temperature control for fast and stable heating.

5.2 Temperature Adjustment

The BK601S offers quick and precise temperature control:

  • Manual Adjustment: Use the 'Up' and 'Down' arrow buttons to adjust the temperature incrementally.
  • 3-Level Quick Adjustment (CH1, CH2, CH3): The station has three programmable channels (CH1, CH2, CH3) for frequently used temperature settings. Press the corresponding channel button to instantly switch to its preset temperature.
Bakon BK601S control panel with CH1, CH2, CH3 buttons for quick temperature adjustment

Utilize the CH1, CH2, CH3 buttons for one-key quick temperature adjustments.

5.3 Temperature Unit Conversion (°C/°F)

The large screen display allows for easy switching between Celsius and Fahrenheit:

  • Refer to the user manual for the specific button combination or menu option to toggle between °C and °F. This is typically done via a dedicated button or a long press of an existing button.
Bakon BK601S display showing temperature conversion between Fahrenheit and Celsius

Switch between Celsius and Fahrenheit for preferred temperature display.

5.4 Sleep Mode & Auto Wake

The BK601S features a sleep function to save energy and prevent oxidation of the soldering iron tip, extending its lifespan.

  • Entering Sleep Mode: The station will automatically enter sleep mode after a period of inactivity (adjustable from 60 to 600 seconds). The display will indicate sleep mode.
  • Auto Wake: Simply pick up the soldering iron from its holder to automatically wake the station and resume operation.
  • Setting Auto-Sleep Time:
    1. Press the menu key to enter the menu.
    2. Use the up or down key to choose the option for auto-sleep time (typically option 3).
    3. Adjust the desired sleep time (60-600 seconds).
    4. Press the menu key again to save the setting.
Diagram showing sleep mode and auto wake features of the Bakon BK601S, including setting sleep time

Sleep mode saves energy and prolongs tip life; auto-wake feature ensures convenience.

6. Maintenance

Proper maintenance ensures the longevity and performance of your soldering station.

6.1 Soldering Tip Care

  • Cleaning: Always clean the soldering tip on the wet sponge or brass wool before and after each use.
  • Tinning: After cleaning, re-tin the tip with a small amount of fresh solder to prevent oxidation.
  • Changing Tips: The soldering iron features a plug-in heating core design and detachable parts, making tip replacement easy. Ensure the station is off and cooled before changing tips.
Exploded view of soldering iron showing easy tip and heating core replacement

The plug-in heating core design allows for easy replacement of tips and heating elements.

6.2 General Cleaning

  • Wipe down the station and handle with a damp cloth. Do not use abrasive cleaners or solvents.
  • Regularly clean the brass wool and replace the sponge when it becomes worn or heavily soiled.

7. Troubleshooting

The BK601S includes built-in protection and error indicators:

  • 'H-E' (Heating Core Short Circuit Protection): If this error appears, it indicates a short circuit in the heating core. Turn off the station, unplug it, and inspect the heating core for damage. Replace if necessary.
  • 'S-E' (Sensor Abnormality Reminder): This error suggests an issue with the temperature sensor. Turn off the station, unplug it, and check the connection of the soldering iron to the station. If the problem persists, the sensor or heating element may need replacement.
Bakon BK601S display showing 'H-E' for heating core short circuit and 'S-E' for sensor abnormality

Error codes 'H-E' and 'S-E' indicate heating core or sensor issues, respectively.

For other issues, ensure all connections are secure and the power supply is stable. If problems persist, contact customer support.

8. Specifications

FeatureSpecificationFeatureSpecification
Output Power90W (Max)Overall Volume160 x 165 x 105mm (6.3 x 6.5 x 4.1 inch)
Input VoltageAC 230V 50Hz / AC 110V 50HzNet/Gross Weight≈0.75Kg / ≈1.2Kg
Temperature Stability±2℃ (Indoor environment, no load)Handle ModelBK902S
Operating Temperature Range180℃ ~ 480℃ (356℉ ~ 896℉)Heating Core ModelBK1370
Ground Resistance of Soldering Iron Tip≤2ΩSoldering Iron Tip ModelBK900M
Ground Voltage of Soldering Iron Tip≤2mVCertificationCE

9. User Tips

  • Pre-tinning Wires: Always pre-tin wires and component leads before attempting to solder them to a PCB for stronger, cleaner joints.
  • Temperature Selection: Start with a lower temperature and gradually increase it if the solder does not flow well. Higher temperatures can damage sensitive components.
  • Tip Selection: Use the appropriate tip shape and size for the task. Conical tips are good for precision, chisel tips for larger pads, and bevel tips for drag soldering.
  • Cleanliness: A clean tip is a good tip. Regularly clean and re-tin your soldering iron tip to ensure efficient heat transfer and prevent oxidation.

10. Warranty and Support

The Bakon BK601S Soldering Station is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact the BAKON Official Store or your authorized dealer.

© 2023 BAKON. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.