1. Introduction
The Bakon BK602S is a versatile 2-in-1 Soldering Rework Station designed for precision electronic repairs and DIY projects. It integrates a soldering iron and a hot air gun into a single compact unit, offering power, precision, and convenience for tasks such such as repairing smartphones, laptops, and circuit boards. This manual provides essential information for the safe and effective operation and maintenance of your BK602S station.
2. Safety Information
- Always ensure mandatory grounding of the unit before operation.
- Keep flammable materials away from the working area.
- Operate the station with dry hands to prevent electrical shock.
- Do not touch the hot air gun nozzle or soldering iron tip directly during or immediately after use.
- Ensure adequate ventilation in your workspace to disperse fumes.
- Automatic protection features are integrated for faulty sensors (S-E), heating elements (H-E), or fans (F-E) to prevent accidents.
3. Product Overview and Components
The Bakon BK602S features a compact design with an intuitive control panel. Familiarize yourself with the main components:
- Wind Gun Mouth: Hot air outlet.
- Heat Gun Handle: Ergonomic handle for the hot air gun.
- Air Gun Bracket: Secure holder for the hot air gun when not in use.
- Set Key: Used to enter settings mode.
- Plus Key (+): Increases values or navigates menus.
- USB Charging Port: 5V output for charging external devices.
- Heat Gun Switch: Activates/deactivates the hot air gun.
- Tin Wire Rack: Convenient holder for solder wire.
- Soldering Iron Tip Placement Slot: Storage for various soldering iron tips.
- Cleaning Ball: For cleaning soldering iron tips.
- Sponge: For wet cleaning of soldering iron tips.
- Shortcut Key (CH): Quickly switch between custom preset temperature and air volume settings.
- Minus Key (-): Decreases values or navigates menus.
- Soldering Iron Switch: Activates/deactivates the soldering iron.
4. Setup
Before operating your Bakon BK602S, ensure all components are properly assembled and connected.
4.1 Package Contents
Depending on your purchased set, the package may include:
- Set 2: Host unit (1), Hot air gun holder (1), Nozzle (2), BK900M soldering iron tips (3), BK1370 heating core (1), BK853B heating core (1), Solder wire 30g (1), User manual (1).
- Set 3: All items from Set 2, plus an 11-piece soldering tool kit.
4.2 Initial Assembly
- Place the hot air gun into its designated air gun bracket on the main unit.
- Insert the soldering iron into its holder.
- Mount the tin wire rack onto the unit.
- Connect the power cord to the station and a suitable power outlet.
5. Operating Instructions
5.1 Power On/Off
Turn on the main power switch located on the back of the unit. The LCD display will illuminate.
5.2 Temperature and Airflow Control
- Use the Plus (+) and Minus (-) keys to adjust the temperature for both the soldering iron and hot air gun.
- The unit supports both Celsius (C) and Fahrenheit (F) display. The temperature ranges are:
- Soldering Iron: 180-480°C (356-896°F)
- Hot Air Gun: 100-500°C (212-932°F)
- Airflow for the hot air gun can also be adjusted using the control panel, though specific buttons are not detailed, typically this is done via the Plus/Minus keys in air gun mode.
5.3 Independent Control
The soldering iron and hot air gun can be operated independently using their respective switches on the control panel.
5.4 Auto Standby & Sleep Function
The BK602S features an automatic cooling system to prevent overheating and independent sleep functions for both tools:
- Hot Air Gun: When placed on its bracket, the heat gun will automatically cool down to 212°F (100°C) within 1-60 seconds and enter standby. It will automatically heat up to the set temperature when picked up.
- Soldering Iron: When placed on its holder and not operated for 60-600 seconds, it will temporarily stop heating and enter hibernation at 356°F (180°C). It will automatically heat up to the set temperature when picked up.
5.5 Shortcut Buttons (CH)
The Shortcut (CH) button allows you to quickly recall customized temperature and air volume settings, enhancing efficiency for repetitive tasks.
5.6 USB Charging Port
The integrated 5V USB charging port provides a convenient way to charge small electronic devices like smartphones directly from the station.
5.7 Applications
The BK602S is suitable for a wide range of tasks, including:
- Line welding
- Main board welding
- Chip maintenance
- Chip dismantling
- Heat shrink plastic applications
6. Maintenance
6.1 Cleaning
- Regularly clean the soldering iron tip using the provided cleaning ball or a damp sponge to remove solder residue.
- Ensure the unit is powered off and cooled before cleaning any external surfaces. Use a soft, dry cloth.
6.2 Replacing Components
- Soldering Iron Tips: The BK602S uses BK900M series soldering iron tips. Ensure the unit is cool before replacing tips.
- Hot Air Gun Nozzles: Nozzles can be quickly replaced as shown in the product demonstration video.
- Heating Cores: The soldering iron uses a BK1370 heating core, and the hot air gun uses a BK853B heating core. Replacement should only be performed by qualified personnel or with extreme care after ensuring the unit is completely cool and unplugged.
7. Troubleshooting
The BK602S is equipped with short circuit protection and sensor abnormality reminders. The display will show error codes if an issue is detected:
- H-E (Heating Core Short Circuit Protection): Indicates a short circuit in the heating core. Power off the unit immediately and inspect the heating element. If the issue persists, contact customer support.
- S-E (Sensor Abnormality Reminder): Indicates a problem with the temperature sensor. Power off and restart the unit. If the error persists, the sensor may need replacement. Contact customer support.
- F-E (Air Gun Fan Faulty): Indicates a malfunction with the hot air gun's fan. Power off the unit and check for any obstructions in the fan's path. If the fan is not working, contact customer support.
8. Specifications
| Component | Parameter | Value |
|---|---|---|
| Main Machine | Output Power | 640W (Max) |
| Dimensions | 160x165x105mm | |
| Input Voltage | AC 110V 50Hz | |
| N.W/G.W | ≈1.0Kg/≈1.5Kg | |
| USB Output Voltage | 5V | |
| Hot Air Gun | Output Power | 550W (Max) |
| Temperature Range | 100°C ~ 500°C | |
| Airflow Volume | 120L/Min | |
| Heating element | 853B | |
| Soldering Part | Output Power | 90W (Max) |
| Temperature Range | 180°C ~ 480°C | |
| Input Voltage | AC 230V 50Hz | |
| Tip to Ground Resistance | ≤2Ω | |
| Heating element | 1370 |
9. User Tips
- Plug Type: The unit is available with either a US plug (110V) or an EU plug (230V). Ensure you have the correct version for your region's power supply.
- Preheating: Allow sufficient time for both the soldering iron and hot air gun to reach their set temperatures for optimal performance. The PID temperature control system ensures fast warming and stable temperatures.
- Tip Selection: Use the appropriate soldering iron tip for the task at hand. The BK900M series offers various tip shapes for different applications.
- Work Area: Maintain a clean and organized workspace to prevent accidents and improve efficiency.
10. Warranty and Support
BAKON stands by the quality of its products. The BK602S Soldering Rework Station comes with a 1-year warranty on the main engine. Accessories are not covered under this warranty.
For any problems or inquiries, our professional after-sales team is available. Please feel free to contact us; we will reply within 7-24 hours.