Introduction
Thank you for choosing the Sunbuck AV-MP326BT Karaoke Sound Amplifier. This high-power 2.1 channel amplifier is designed to enhance your audio experience with features like FM radio, USB and SD card playback, MP3 compatibility, a 10-segment audio equalizer, and Bluetooth connectivity. This manual provides essential information for safe operation, setup, and maintenance of your device.
Safety Information
WARNING: To reduce the risk of electric shock, do not remove the cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
- Read all instructions carefully before operating the amplifier.
- Keep this manual for future reference.
- Do not expose this appliance to rain or moisture.
- Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- Only use attachments/accessories specified by the manufacturer.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
Package Contents
Please check the box for the following items:
- 1 x Sunbuck AV-MP326BT Power Amplifier
- 1 x Remote Control
- 1 x Instruction Manual
Product Overview
Familiarize yourself with the amplifier's controls and connections:
Video: Overview of the Sunbuck AV-MP326BT Karaoke Sound Amplifier's features and design.

Figure 1: Front and Rear Panel Diagram
Front Panel Controls:
- Power Switch: Turns the amplifier on or off.
- Microphone Jacks (MIC1-MIC4): Connect up to four microphones.
- Treble Adjustment: Adjusts the high-frequency response for microphones.
- Microphone Bass Adjustment: Adjusts the low-frequency response for microphones.
- Bass Adjustment: Adjusts the overall low-frequency response for music.
- SD Socket: Insert an SD card for media playback.
- Left and Right Balance: Adjusts the balance between the left and right audio channels.
- Previous Song: Skips to the previous track during media playback.
- Microphone Bass Adjustment (Duplicate Label): Another control for microphone bass.
- Display: Shows current mode, track information, or FM frequency.
- Pause/Playback: Plays or pauses media playback.
- Function Switch: Selects input source (e.g., FM, USB, SD, Bluetooth, Line In).
- USB Port: Insert a USB drive for media playback.
- Microphone Volume Adjustment: Adjusts the overall volume of connected microphones.
- Input Audio Switching: Selects the audio input source.
- Total Volume Adjustment: Adjusts the master volume of the amplifier.
- Next Song: Skips to the next track during media playback.
- Single Song Loop: Repeats the current track during media playback.
- 10-Band Equalizer Adjustment: Fine-tunes specific frequency bands for audio output.
Rear Panel Connections:
- Audio Input (A/B Line): RCA inputs for connecting external audio sources (e.g., CD player, TV).
- Right Audio Output: Speaker terminal for the right channel.
- Audio Input (Duplicate Label): Another set of RCA inputs.
- Active Subwoofer Output: Connect an active subwoofer.
- Left Audio Output: Speaker terminal for the left channel.
- 12V DC Power Supply Interface: Connect a 12V DC power source (if applicable).
- Power Cord: Connects to AC power supply.
Setup
1. Power Connection
Connect the power cord (26) to the amplifier and then to a suitable AC power outlet (220V-240V or 110V, depending on your model). Alternatively, for DC operation, connect a 12V DC power source to the 12V DC power supply interface (25).
2. Speaker System Connection
Connect your passive speakers to the 'SPEAKER SYSTEM' terminals on the rear panel. Ensure correct polarity (red to red, black to black) for both left (24) and right (21) channels.
3. Active Subwoofer Connection
If using an active subwoofer, connect it to the 'Active subwoofer' output (23) on the rear panel.

Figure 2: Speaker and Subwoofer Connection Diagram
4. Audio Input Connection
Connect your external audio sources (e.g., CD player, TV, DVD player) to the 'AUDIO INPUT' RCA jacks (20 or 22) on the rear panel. Use the A or B line inputs as needed.
5. Microphone Connection
Plug your microphones into the 'MIC1', 'MIC2', 'MIC3', or 'MIC4' jacks (2) on the front panel.
6. FM Antenna
Connect the FM antenna to the 'FM ANT' terminal on the rear panel for improved radio reception.
Operating Instructions
1. Power On
Press the 'POWER' switch (1) to turn on the amplifier. The display (10) will illuminate.
2. Selecting Input Source
Use the 'Function Switch' (12) or 'Input Audio Switching' (15) to cycle through available input sources: FM, USB, SD, Bluetooth, or Line In (A/B).
3. Adjusting Volume
- Master Volume: Use the 'Total Volume Adjustment' knob (16) to control the overall output volume.
- Microphone Volume: Adjust the 'Microphone Volume Adjustment' knob (14) for microphone levels.
4. Microphone Effects
Use the 'Treble Adjustment' (3), 'Microphone Bass Adjustment' (4, 9), 'Echo', and 'Delay' knobs (located near the microphone controls) to fine-tune your vocal sound.
5. Audio Equalization
Utilize the '10-Band Equalizer Adjustment' sliders (19) to customize the frequency response of your music. Adjust individual bands to suit your listening preferences or room acoustics.
6. USB/SD Card Playback
Insert a USB drive into the 'USB Port' (13) or an SD card into the 'SD Socket' (6). The amplifier will automatically detect and begin playing compatible audio files. Use 'Previous Song' (8), 'Pause/Playback' (11), 'Next Song' (17), and 'Single Song Loop' (18) for control.
7. Bluetooth Operation
- Switch the input source to Bluetooth mode using the 'Function Switch' (12). The display (10) will indicate Bluetooth pairing mode.
- On your mobile device, search for Bluetooth devices and select 'Sunbuck AV-MP326BT' (or similar name) to pair.
- Once paired, you can stream audio wirelessly from your device to the amplifier.
8. FM Radio
Switch the input source to FM mode. The amplifier will automatically scan for available stations. Use the 'Previous Song' (8) and 'Next Song' (17) buttons to navigate between stations.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | Sunbuck |
| Model Number | AV-MP326BT |
| Item No. | AV-326BT |
| Dimensions (LxWxH) | 29cm x 24cm x 10cm |
| Rated AC Voltage | 220V—240V / 110V |
| DC Voltage | DC 12V |
| Rated Power | 200W + 200W |
| Rated Frequency | 20KHz |
| Distortion Rate | 0.5% |
| Signal to Noise Ratio | 90dB |
| Impedance | 4-16 Ohm |
| Amplifier Type | HIFI amplifier |
| Channels | 3 (2.1) |
| Maximum Power Per Channel | Above 200W |
| Origin | Mainland China |
| Certification | CE |

Figure 3: Amplifier Dimensions
Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the amplifier. Do not use liquid cleaners or aerosol sprays.
- Ventilation: Ensure the amplifier has adequate ventilation. Do not block the ventilation openings on the top or sides.
- Storage: When not in use for extended periods, store the amplifier in a cool, dry place away from direct sunlight and extreme temperatures.
- Power Off: Always turn off and unplug the amplifier before cleaning or performing any maintenance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cord not connected; Power switch off; No power from outlet. | Ensure power cord is securely plugged in; Turn on the power switch; Check the power outlet with another device. |
| No sound output | Incorrect input selected; Speaker wires loose or incorrectly connected; Volume too low; Mute function active. | Select the correct input source; Check all speaker connections and polarity; Increase master volume; Ensure mute is off. |
| Microphone not working | Microphone not plugged in correctly; Microphone volume too low; Microphone faulty. | Ensure microphone is fully inserted into the jack; Increase microphone volume; Test with another microphone. |
| Bluetooth not connecting | Amplifier not in Bluetooth mode; Device too far; Device already paired with another amplifier. | Switch amplifier to Bluetooth input; Move device closer to amplifier; Disconnect from other devices and try again. |
| USB/SD card not playing | USB/SD card not inserted correctly; Incompatible file format; Corrupted media. | Reinsert USB/SD card; Ensure audio files are in a compatible format (e.g., MP3); Try another USB/SD card. |
User Tips
- For optimal sound quality, ensure your speakers are matched to the amplifier's impedance range (4-16 Ohm).
- Experiment with the 10-band equalizer to find the perfect sound profile for different music genres or vocal performances.
- When using microphones, adjust the Echo and Delay effects subtly to avoid feedback and create a more natural sound.
- Always ensure proper ventilation around the amplifier to prevent overheating, especially during prolonged use.
Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller or authorized service center. Keep your purchase receipt as proof of purchase.