1. Introduction
Thank you for choosing the AUX Desktop Water Dispenser. This appliance is designed to provide convenient access to hot, cold, and room temperature water for your home or office. Featuring a durable 304 stainless steel inner tank and intelligent anti-dry burn protection, it ensures safe and reliable operation. Please read this manual thoroughly before use to ensure proper installation, operation, and maintenance.

2. Safety Precautions
- Ensure the power supply voltage matches the appliance's requirements (220V).
- Do not immerse the appliance, power cord, or plug in water or other liquids.
- Keep the appliance out of reach of children.
- Unplug the dispenser before cleaning or maintenance.
- Do not operate the appliance if it is damaged or malfunctioning.
- Ensure proper ventilation around the dispenser.
- The anti-dry burn protection automatically cuts power if water levels are too low or temperature is too high.
3. Setup
Unpacking: Carefully remove the water dispenser from its packaging. Retain packaging for future transport or storage.
Placement: Place the dispenser on a stable, level surface, away from direct sunlight and heat sources. Ensure there is adequate space around the unit for ventilation.
Water Bottle Installation:
- Clean the exterior of a standard water bottle (3.5L, 5L, 10L, or 19L) before placing it on the dispenser.
- Remove the cap from the water bottle.
- Carefully invert the water bottle and place it onto the removable 'smart seat' at the top of the dispenser. Ensure it is seated firmly to prevent leaks.

The dispenser is compatible with various water bottle sizes. Initial Flush: Before first use, dispense at least 1-2 liters of water from both the hot and cold/room temperature taps to flush out any dust or impurities from the internal tanks. Discard this water.
Power Connection: Plug the power cord into a grounded 220V electrical outlet.
4. Operating Instructions
The AUX water dispenser offers both heating and cooling functions, depending on the model (YT-5-L for heating, YT-5-0.75L for cooling, or combined functionality if applicable).


4.1 Power On/Off
- Press the 'Power' button (labeled with a circle and vertical line) to turn the unit on or off. The corresponding indicator light will illuminate.
4.2 Heating Function (for YT-5-L and combined models)
- Press the 'Heating' button (often labeled with a flame icon or '加热'). The heating indicator light will turn on.
- Water will be heated to approximately ≥95°C.
- The heating element will automatically turn off once the desired temperature is reached and reactivate when the temperature drops.
4.3 Cooling Function (for YT-5-0.75L and combined models)
- Press the 'Cooling' button (often labeled with a snowflake icon or '制冷'). The cooling indicator light will turn on.
- Water will be cooled to approximately 10-15°C.
- The cooling system will automatically regulate the temperature.

4.4 Water Dispensing
- Room Temperature Water: Place your cup under the room temperature tap and gently push the lever with your cup.
- Hot Water: For hot water, press the dedicated hot water button (often labeled '开水'). Exercise caution as the water is very hot.

4.5 Anti-Dry Burn Protection
The dispenser is equipped with an intelligent anti-dry burn system. If the water level in the heating tank is too low or the temperature becomes excessively high, the system will automatically cut off power to prevent damage and ensure safety. This extends the lifespan of the appliance.

5. Maintenance
Regular cleaning and maintenance will ensure the longevity and hygiene of your water dispenser.

5.1 Cleaning the Smart Seat
- The smart seat (where the water bottle rests) is removable. Lift it off the dispenser.
- Wipe the interior and exterior of the smart seat with a clean, damp cloth.
- Ensure it is completely dry before reattaching.
5.2 Cleaning the Drip Tray
- The drip tray is detachable for easy cleaning. Pull it out from the front of the dispenser.
- Empty any accumulated water and wash the tray with mild soap and water.
- Rinse thoroughly and dry before placing it back into position.
5.3 Exterior Cleaning
- Wipe the exterior surfaces of the dispenser with a soft, damp cloth.
- Do not use abrasive cleaners or solvents.
5.4 Descaling (General Advice)
- Over time, mineral deposits (limescale) may build up inside the hot water tank.
- To descale, unplug the unit and allow it to cool.
- Consult a professional or refer to general descaling instructions for water heaters, using food-grade descaling solutions. Ensure thorough rinsing after descaling.

6. Troubleshooting
- No Hot/Cold Water: Check if the heating/cooling switch is turned on. Ensure the power cord is securely plugged in and there is water in the bottle.
- Water Leakage: Ensure the water bottle is properly seated on the smart seat. Check for cracks in the water bottle.
- No Water Dispensed: Check if the water bottle is empty. Ensure the smart seat is correctly installed.
- Unusual Noise: A slight humming sound from the cooling compressor is normal. If the noise is loud or unusual, unplug the unit and contact support.
7. Specifications

| Feature | Model YT-5-L (Heating) | Model YT-5-0.75L (Cooling) |
|---|---|---|
| Rated Voltage | 220V | 220V |
| Heating Power | 550W | N/A |
| Cooling Power | N/A | 70W |
| Hot Water Temperature | ≥95°C | N/A |
| Cold Water Temperature | N/A | 10-15°C |
| Net/Gross Weight | 2.2KG / 2.8KG | 2.85KG / 3.45KG |
| Machine Dimensions | 255mm (W) * 250mm (D) * 410mm (H) | |

8. User Tips
- Water Bottle Not Included: Please note that the large water bottle (jerrycan) is not included with the dispenser and must be purchased separately.
- Initial Water Dispensing: Always dispense water from both taps for a few seconds after installing a new bottle or setting up the unit to ensure proper water flow and temperature.
- Energy Saving: If you don't require hot or cold water for extended periods, you can turn off the respective heating or cooling switches to save energy.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.