Broadcom 9305-16i

Contents

Broadcom 9305-16i 16-Port HBA Expansion Card User Manual

Model: 9305-16i

Brand: Broadcom

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Broadcom 9305-16i 16-Port Host Bus Adapter (HBA) expansion card. Designed for high-performance storage solutions, this card is ideal for data centers, enterprise storage, and cloud computing environments, offering robust and stable connectivity for hard disk expansion.

Key features include:

  • PCIe 3.0 X8 interface
  • 12Gb/s transfer rate
  • 4*SFF8643 interface connectors
  • Powered by the Broadcom SAS3224 controller

2. Setup

2.1 Package Contents

Ensure all components are present:

  • Broadcom 9305-16i HBA Card
  • Low-profile bracket (if included, for half-height installation)

2.2 Hardware Installation

  1. Power down your system and disconnect all power cables.
  2. Open your computer case.
  3. Locate an available PCI Express 3.0 x8 slot or higher.
  4. Remove the corresponding expansion slot cover from the chassis.
  5. Carefully insert the Broadcom 9305-16i HBA card into the PCIe slot, ensuring it is fully seated.
  6. Secure the card with the chassis screw or retention clip.
  7. Connect your SAS/SATA drives to the four SFF8643 interfaces on the card using appropriate cables. Each SFF8643 connector supports four SAS/SATA lanes.
  8. Close your computer case and reconnect all power cables.
Broadcom 9305-16i HBA Card Front View
Figure 1: Front view of the Broadcom 9305-16i HBA card, highlighting its PCIe 3.0 X8 interface, 12Gb/s transfer rate, and four SFF8643 connectors.
Broadcom 9305-16i HBA Card Product Details
Figure 2: Detailed diagram of the HBA card, showing key components such as the metal stopper, 15um Gold Finger, High TG sheet, SAS3224 Controller (underneath heatsink), Heat sink, and SFF8643 Interfaces.

2.3 Software Installation

Upon system boot, the operating system should detect the new hardware. Install the necessary drivers for the Broadcom SAS3224 controller. Drivers are typically available from the Broadcom support website or your system manufacturer.

The card supports a wide range of operating systems, including:

  • Microsoft Windows
  • Linux (Oracle, SuSE, Red Hat)
  • Solaris
  • VMware
  • FreeBSD, CentOS, Canonical, Citrix, FreeBSD.Fedora, Debian

3. Operating Instructions

The Broadcom 9305-16i functions as a Host Bus Adapter, providing direct connectivity to SAS/SATA storage devices. It is designed for non-RAID configurations, supporting up to 1024 non-RAID devices.

3.1 Key Operational Aspects

  • High Transfer Rate: Experience 12Gb/s data transfer rates, compliant with SAS 3.0.
  • Flexible Port Configuration: Supports 16x1 wide ports for single drives, 4x4 wide ports, or 2x8 wide ports, offering versatility for various storage setups.
  • Stable Performance: The Broadcom SAS3224 controller ensures stable server operation with reduced frame and packet loss.

3.2 Applications

This HBA card is suitable for a variety of demanding applications:

Broadcom 9305-16i HBA Card Applications
Figure 3: Visual representation of the diverse applications for the HBA card, including Database construction, Cloud Computing Server, Application virtualization, Graphics workstations, Data processing, and Intelligent Learning.

4. Maintenance

To ensure the longevity and optimal performance of your Broadcom 9305-16i HBA card, follow these general maintenance guidelines:

  • Keep Clean: Regularly inspect the card for dust accumulation, especially on the heatsink. Use compressed air to gently remove dust.
  • Proper Airflow: Ensure adequate airflow within your system chassis to prevent overheating. The card features a passive copper heatsink, relying on system airflow for cooling.
  • Secure Connections: Periodically check that all cable connections (SFF8643 to drives, and the card in the PCIe slot) are secure.
  • Durability: The card is built with a reliable immersed gold process and 15-30um gold-plated contacts for enhanced wear resistance and stable contact.
Broadcom 9305-16i HBA Card Component Details
Figure 4: Close-up view of the HBA card's components, showcasing the 15-30um gold-plated contacts, high-performance heatsinks, and high TG sheet for durability and reliability.

5. Troubleshooting

While the Broadcom 9305-16i is designed for stability, should you encounter issues, consider the following general troubleshooting steps:

  • No Detection:
    • Ensure the card is fully seated in the PCIe slot.
    • Verify that the PCIe slot is functional (try another card if possible).
    • Check BIOS/UEFI settings to ensure PCIe slots are enabled.
  • Drive Not Detected:
    • Confirm that SAS/SATA cables are correctly connected to both the HBA card and the drives.
    • Test with different cables if available.
    • Ensure drives are powered on.
  • Performance Issues:
    • Verify that the correct and latest drivers are installed for your operating system.
    • Check system resource utilization (CPU, RAM) to rule out bottlenecks.
    • Ensure proper cooling to prevent thermal throttling.
  • Operating System Compatibility: Confirm your operating system is listed as supported in the specifications.

For persistent issues, refer to the manufacturer's support resources or contact technical support.

6. Specifications

The following table details the technical specifications of the Broadcom 9305-16i HBA card:

FeatureDetail
Product BrandBroadcom
Product Model9305-16i
I/O ControllerSAS 3224 / Fusion MPT 2.5
Number of Ports16-Port, Internal
Connectors4*Mini SAS HD SFF8643 (x4)
Storage Connection Data Transfer RateCompliant with 12Gb/s SAS 3.0
SAS Bandwidth1200MB/s per port (each direction)
Port Configuration16x1 wide ports (single drive), 4x4 wide ports, 2x8 wide ports
Host BusPCIe 3.0 X8
PCI Data Burst Transfer RateHalf-duplex x8, PCIe 3.0.8000 MB/s half- and full-high
Retainer HeightHalf- and Full-height
Physical Dimensions156mm x 69mm
Cable HolderPassive copper
Operating Voltage+12V +/-8%; 3.3V +/-9%
PCI PowerTypical 16.2W
Equipment Support1024 non-RAID devices
Working Temperature0°C to 55°C, 5% to 90% non-condensing, airflow: 200LFM
Storage Temperature-45°C to 105°C, 5% to 90% non-condensing, airflow: 200 LFM
MTBF>3,500,000 hours at 40°C
Areas of ApplicationData center, enterprise storage, cloud computing
Supported Operating SystemsMicrosoft Windows, Linux (Oracle, SuSE, Red Hat), Solaris, VMware, FreeBSD, CentOS, Canonical, Citrix, FreeBSD.Fedora, Debian.
Broadcom 9305-16i HBA Card Physical Dimensions and Parameters
Figure 5: Diagram illustrating the physical dimensions (156mm x 69mm) and a summary of key product parameters.

7. User Tips

No specific user tips were available from reviews or Q&A for this product at this time. Always ensure your system's power supply can adequately support all installed components, including the HBA card and connected drives.

8. Warranty and Support

The Broadcom 9305-16i HBA card comes with a 3-year warranty. Additionally, lifetime maintenance is provided for applications in data centers, enterprise storage, and cloud computing environments.

For technical support, warranty claims, or further assistance, please contact your vendor or the manufacturer directly. Keep your purchase receipt and product serial number handy when seeking support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.