1. Introduction
Thank you for choosing the M98 Wireless Bluetooth Headset. This headset features Bluetooth 5.2 technology, ENC (Environmental Noise Cancellation) for clear calls, and a unilateral design for comfortable use. This manual provides detailed instructions on how to set up, operate, and maintain your headset to ensure optimal performance.

2. Setup
2.1 Initial Charging
Before first use, fully charge your M98 headset. When the battery is low, the red indicator light will flash. Connect the Type-C charging cable to the headset's charging port and a suitable power source (DC 5V, 500mA or more). Charging typically takes about 2 hours. The red LED will be continuously on during charging and will turn off, with the blue LED staying on, once fully charged.

2.2 Bluetooth Pairing and Connection
- Power On: From the shutdown state, long-press the Multi-function button for 3-4 seconds. The headset will power on, and the red and blue indicator lights will flash alternately, indicating it's in pairing mode. If there's a previous pairing record, it will attempt to reconnect.
- Connect to Device: Turn on Bluetooth on your mobile phone or other device and search for available devices. Select "M98" from the list.
- Confirmation: Once successfully connected, the LED indicator on the headset will change to a slow blue flash. Your phone will display "M98" as connected. You can now use the headset for music or calls.

3. Operating Functions
3.1 Basic Button Operations
| Key | Function | Operation Method |
|---|---|---|
| Multi-function Button | Power On | From shutdown state, long-press for 3-4 seconds. |
| Shutdown | From power-on state, long-press for 5 seconds. | |
| Enter Pairing Mode | From shutdown state, long-press for 5-7 seconds, OR double-click from unconnected standby/reconnection state. (Automatically enters pairing mode if Bluetooth disconnects). | |
| Play/Pause Music | Short press during music playback. | |
| Last Number Redial | Double-click from connected standby or music state. | |
| Voice Dialing | Long-press for 1 second from connected standby or music state. | |
| Audio Switching (Call) | During a call, long-press for 1 second to switch audio between phone and headset. | |
| Answer Call | Short press during an incoming call. | |
| Hang Up Call | Short press during a call. | |
| Refuse Call | Long-press for 1 second during an incoming call. | |
| Volume Up Button | Volume Increase | Short press during call or music playback. |
| Next Song | Long-press for 1 second during music playback. | |
| Volume Down Button | Volume Decrease | Short press during call or music playback. |
| Previous Song | Long-press for 1 second during music playback. | |
| Mute Button | Mic Mute | Short press during a call to mute the microphone. Press again to unmute. |

3.2 Dual Device Connection (One with Two)
The M98 headset supports connecting to two mobile phones simultaneously. Follow these steps:
- Connect to First Phone (Phone A): From the shutdown state, long-press the Multi-function button for 3-4 seconds until the red and blue lights flash alternately. Power on and enter pairing mode. Enable Bluetooth on Phone A and search for "M98". Click to connect. Once connected, turn off Phone A's Bluetooth. The M98 will re-enter pairing mode.
- Connect to Second Phone (Phone B): Pair and connect the M98 with Phone B using the same method as for Phone A.
- Reconnect Phone A: After Phone B is successfully connected, turn on Phone A's Bluetooth and click "M98" to connect. (Some phones may automatically reconnect).
Note:
- When connected to two devices, only one mobile phone can play music at a time. To play music from the other phone, you must first pause or stop music playback on the currently active phone.
- The same principle applies to calls; only one call can be active at a time.

3.3 Status Indicator Lights
| State | Indicator Light Display |
|---|---|
| Power On | Blue LED flashes 3 times. |
| Shutdown | Red LED stays on for 1 second. |
| Pairing State | Red and blue LEDs flash alternately. |
| Connected Standby | Blue LED flashes every 10 seconds. |
| Music Playback | Blue LED flashes twice every 10 seconds. |
| Call State | Blue LED flashes twice every 10 seconds. |
| Clear Pairing Record | Red and blue LEDs flash once simultaneously. |
| Charging | Red LED is always on. |
| Fully Charged | Blue LED is always on. |
| Low Voltage Alarm | Red light flashing. |
4. Specifications
| Feature | Detail |
|---|---|
| Wireless Version | V5.2 |
| Wireless Chip | BT8926B |
| Communication Distance | 10 meters |
| Wireless Protocol | HSP, HFP, A2DP, AVRCP |
| Decoding Method | SBC, AAC |
| Battery Capacity | 400mAh |
| Charging Time | Approx. 2 hours |
| Talk Time | Approx. 35 hours (at 70% volume) |
| Music Playback Time | Approx. 60 hours (at 70% volume) |
| Standby Time | Approx. 350 hours |
| Net Weight | Approx. 141g |
| Headphone Dimensions | 192.90 x 157.08 x 54.05 mm |



5. Maintenance
5.1 Charging Guidelines
- Always use the provided Type-C charging cable or a compatible charger (DC 5V, 500mA or more).
- Avoid overcharging the headset. Once the blue LED indicates a full charge, disconnect it from the power source.
- If the M98 headset is not used for an extended period, charge it at least once every two months to maintain battery health.
5.2 Cleaning
- Wipe the headset with a soft, dry cloth.
- Do not use abrasive cleaners or solvents, as they may damage the surface.
- Keep the charging port free of dust and debris.
6. Troubleshooting
6.1 Connection Issues
- Headset does not reconnect automatically: After initial successful pairing, the M98 should automatically reconnect to your phone upon power-on. If it fails to reconnect, please re-pair the headset with your device. The headset is designed to reconnect within 10 minutes; after this period, it will automatically shut down.
- Disconnection from long distance: If the headset disconnects due to being out of range, it will report "Your headset is connected" once when re-entering range. If it doesn't reconnect, try moving closer to your device or re-pairing.
6.2 Clearing Pairing Records
To clear all pairing records from the headset:
- From the power-on state, simultaneously press the Multi-function button and the Volume Down button for 5 seconds. The red and blue LEDs will flash once simultaneously, indicating that the pairing records have been cleared. You will then need to re-pair the headset with any device. This action can be performed even during music playback.
6.3 Pairing Password Prompt
If your device prompts for a pairing password when connecting to the M98, try entering one of the following common passwords: 0000 (four zeros), 8888 (four eights), 1111 (four ones), or 1234.
6.4 Charging Issues / Abnormalities
- Cannot power on or other connection abnormalities: Try a 'charge reset'. Insert the charging cable to initiate charging. This process will perform a reset shutdown. After the reset, power on the headset again. If the issue persists, please contact customer support.
- Automatic Shutdown: The headset will automatically shut down if there is no active connection for more than 10 minutes, or if the battery voltage drops below 3.1V.
7. User Tips
- For optimal call clarity, ensure the microphone is positioned correctly near your mouth.
- Regularly check the battery level to avoid interruptions during important calls or music sessions.
- Keep your headset's firmware updated if updates become available (check manufacturer's website for details).
8. Warranty and Support
For any product-related inquiries, technical support, or warranty information, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.