1. Introduction
The AULA F21 is a versatile 21-key mechanical numeric keypad designed for enhanced productivity and gaming. It features a unique transparent design, hot-swappable switches, and multiple connectivity options to suit various user needs and devices.
Key Features:
- Three-mode connection: Bluetooth (BT1, BT2, BT3), 2.4G Wireless, and Wired (Type-C).
- 21-key layout with transparent keycaps and customized shaft body.
- Hot-swappable switch sockets for easy customization and maintenance.
- RGB backlight with various effects.
- Built-in silencer structure with sandwich cotton for reduced noise.
- Multi-system compatibility (Windows, iOS, Mac, Android).
- Custom software support for lighting and key functions.
2. Package Contents
Please check the package for the following items:
- AULA F21 Numeric Keypad
- Type-C Charging Cable
- User Manual
- Keycap Puller / Switch Puller Tool
- 2.4G USB Receiver (usually stored in a compartment on the bottom of the keypad)

3. Setup and Connection
3.1 Charging the Keypad
Before first use, it is recommended to fully charge the keypad. Connect the provided Type-C charging cable to the keypad's Type-C port and the other end to a USB power source (e.g., computer USB port, USB wall adapter).

3.2 Switching Connection Modes
The AULA F21 supports three connection modes: Wired, 2.4G Wireless, and Bluetooth (up to 3 devices). The mode switch is located on the bottom of the keypad.
To switch between modes:
- Wired Mode: Connect the Type-C cable directly to your device. The keypad will automatically switch to wired mode.
- 2.4G Wireless Mode: Locate the 2.4G USB receiver (usually stored in a compartment on the bottom of the keypad). Plug the receiver into a USB port on your computer. Switch the mode toggle on the keypad to the 2.4G position.
- Bluetooth Mode: Switch the mode toggle on the keypad to the Bluetooth position.
3.3 Pairing Bluetooth Devices
The keypad can store up to three Bluetooth connections (BT1, BT2, BT3).
- Switch the mode toggle to the Bluetooth position.
- Press FN + 1 for BT1, FN + 2 for BT2, or FN + 3 for BT3 to select a Bluetooth channel.
- Hold down the selected FN + BT key combination for a few seconds until the indicator light flashes, indicating pairing mode.
- On your device (computer, tablet, phone), search for Bluetooth devices and select "AULA F21" to connect.
- Once paired, the indicator light will stop flashing.

4. Operating Instructions
4.1 Basic Key Functions
The AULA F21 features a standard 21-key numeric layout. Some keys have secondary functions accessible via the Fn key.
- Num: Numeric Lock toggle.
- Esc: Escape key.
- Tab: Tab key.
- Fn + Esc: Toggle backlight modes.
- Fn + Tab: Adjust backlight brightness.
- Fn + Del: Adjust backlight speed.
- Fn + *: Media Play/Pause.
- Fn + -: Previous Track.
- Fn + +: Next Track.
- Fn + Enter: Mute/Unmute.
4.2 Backlight Control
The keypad features RGB backlighting. Use the Fn key combinations to customize the lighting effects:
- Press Fn + Esc repeatedly to cycle through different backlight modes (e.g., static, breathing, wave).
- Press Fn + Tab to increase brightness and Fn + Shift (or equivalent key for brightness down, refer to product specific manual if different) to decrease brightness.
- Press Fn + Del to adjust the speed of dynamic backlight effects.
4.3 Custom Software
The AULA F21 supports custom software for advanced customization of lighting and key functions. Please visit the official AULA website to download the latest software for your operating system.

5. Maintenance
5.1 Cleaning
To clean your keypad:
- Disconnect the keypad from all devices.
- Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and casing.
- Avoid spraying liquids directly onto the keypad.
- For deeper cleaning, you can use the provided keycap puller to remove keycaps and clean underneath.
5.2 Hot-Swappable Switches
The AULA F21 features hot-swappable switch sockets, allowing you to change mechanical switches without soldering.

To replace a switch:
- Gently remove the keycap using the keycap puller.
- Use the switch puller tool to carefully grip the switch and pull it straight up.
- Align the pins of the new switch with the holes on the PCB and press it firmly until it clicks into place.
- Replace the keycap.
Caution: Ensure the switch pins are straight before inserting to avoid bending or damaging the sockets.
6. Troubleshooting
6.1 Connectivity Issues
- Keypad not connecting via 2.4G/Bluetooth: Ensure the keypad is in the correct mode (2.4G or Bluetooth). For Bluetooth, ensure it's in pairing mode and your device's Bluetooth is enabled. Try re-pairing.
- Intermittent connection: Check for interference from other wireless devices. Ensure the 2.4G receiver is directly connected to a USB port, not a hub. Ensure the keypad is charged.
- Wired connection not working: Try a different Type-C cable or USB port. Ensure the cable is securely connected.
6.2 Keys Not Responding
- Specific keys not working: If you have hot-swappable switches, try removing and re-inserting the switch for the non-responsive key. Ensure the switch pins are not bent.
- All keys not working: Check the connection mode. Ensure the keypad is charged. Try restarting your computer/device.
6.3 Backlight Issues
- Backlight not turning on: Ensure the keypad is powered on and charged. Try cycling through backlight modes using Fn + Esc.
- Backlight flickering: This could indicate low battery. Charge the keypad.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | AULA |
| Model | F21 |
| Number of Keys | 21 keys |
| Connection Modes | Bluetooth (BT3.0/BLE5.2), 2.4G Wireless, Wired (Type-C) |
| Simultaneously Connected Devices | 3 (Bluetooth) |
| Keycap Material | PC Transparent Keycaps |
| Switch Type | Mechanical (Ice Crystal Switch / Ice Soul Switch optional), Hot-swappable |
| Backlight | RGB |
| Operation Style | Mechanical |
| Interface Type | USB, Bluetooth, Bluetooth / USB (Type-C port for wired/charging) |
| Battery Capacity | 600mAh |
| Product Size | 120.5 x 82.5 x 37.8 mm (±3mm) |
| Product Weight | 158g (±3g) |
| Compatibility | Desktop, Laptop, Number (Windows, iOS, Mac, Android) |
| Sound Attenuation Scheme | Embedded poron sound-absorbing cotton |
| Ergonomics | Yes |
| N-Key Rollover | All keys punchless |


8. User Tips
Based on common user experiences with similar numeric keypads:
- Battery Life: To conserve battery in wireless modes, the keypad automatically enters power-saving mode without any operation for 1.5 minutes. Click any key to wake it up. It enters deep sleep after 10 minutes.
- Customization: Explore the custom software to remap keys or create macros for specific applications (e.g., Photoshop, Excel) to maximize productivity.
- Switch Experimentation: Take advantage of the hot-swappable feature to try different mechanical switches that suit your typing preference.
- Portability: Its small size makes it ideal for carrying with a laptop or tablet for on-the-go number entry.
9. Warranty and Support
For warranty information, please refer to the documentation included with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.
For technical support, please visit the official AULA website or contact their customer service.