BOBLOV M7 Pro

Contents

BOBLOV M7 Pro 4K Police Body Camera

User Manual

Caution

  1. Always fully charge the battery before use. It is advised to charge at least 4 hours.
  2. Use the standard Type-C cable and 5Vdc, 2A charger plug to charge.
  3. It is better to power off the camera manually for stable and quick charging.
  4. Do not expose the camera or battery to high/low-temperature environments. If the battery leaks or bulges, stop using it. There is a risk of explosion if the battery is placed by an incorrect type.
  5. Never replace the battery on your own. It may cause damage or an explosion. Please contact the seller if the battery has any problem.
  6. Do not put the LCD or lens under direct sunshine.
  7. Never dismantle, crush, or pierce the product, or allow it to short-circuit. Please seek professional assistance if the product doesn't work properly.
  8. If you do not use the camera, please charge it every once in a while; otherwise, the battery will be damaged slowly.
  9. Maintenance: To clean the lens and both LCD screens, wipe with a soft, lint-free cloth. Do not insert foreign objects around the lens. Do not use liquids.

Product Overview

Structure Diagram

The following diagram illustrates the main components and their corresponding numbers on the BOBLOV M7 Pro body camera.

Front and back view of the BOBLOV M7 Pro body camera with numbered labels for components.
Figure 1: BOBLOV M7 Pro Structure Diagram
  1. Working Indicator Light ①
  2. Working Indicator Light ②
  3. Blue Flash Light
  4. Red Flash Light
  5. Four IR Lights
  6. Image Sensor
  7. White Light
  8. Microphone
  9. Speaker Output
  10. Big Front Video Button
  11. 180° Rotatable Lens
  12. Reset Button
  13. Menu / OK / Confirm Button
  14. Up Button / Video Lock / Rewind
  15. Down Button / Playback Button / Fast Forward
  16. Return Button
  17. Type-C Charging Port
  18. IR Active Button / White Light Active Button
  19. Power Button
  20. Photo Button / Red-Blue Alarm Active Button
  21. Video Button
  22. Audio Button

Button Operation Guide

This table provides a quick reference for the functions of each button on the camera.

Button Function
Big Front Video Button Long press to activate camera and start video recording from power-off state. Short press to start/stop video recording in standby mode.
Menu Button / OK / Confirm Short press to enter Menu settings in standby. In playback list, confirm file and long press for delete option. Confirms selections.
Up Button / Video Lock / Rewind Short press for previous option/step in menu/playback. Short press for Rewind Play during video playback. Short press to Lock/Mark current file during recording.
Down Button / Playback / Fast Forward Short press to enter Playback Mode in standby. Short press for next option/step in menu/playback. Short press for Fast Forward during video playback.
Return Button Short press acts as a return key in menu settings.
IR Button Short press to turn on/off White Light in standby/video mode. Long press to turn on/off IR Lights in standby/video mode.
Power Button Long press to Power On/Off the camera. Short press in standby to light off the display.
Photo Button Short press to take one photo. Long press to activate alarm sound and Red-Blue Flash Lights; long press again to deactivate alarm sound; third long press to deactivate Red-Blue Flash Lights.
Video Button Long press to activate camera and start video recording from power-off state. Short press to start/stop video recording in standby mode.
Audio Button Short press to start/stop audio recording in standby mode.

Quick Setup

1. Charge the Camera

Use the standard Type-C cable and 5Vdc, 2A charger plug to charge the camera. The M7 Pro body camera takes approximately 4 hours to fully charge with the provided fast charger.

Note: Once connected to a power socket, the camera will boot automatically. Please manually power it off for charging.

Diagram showing the BOBLOV M7 Pro camera connected to a 5V/2A power supply via USB-C cable, indicating 4 hours charging time and 15 hours recording time.
Figure 2: Charging the M7 Pro Camera

2. Power On/Off/Standby Mode

Power On/Off

Long press the Power Button (Power button icon) to boot the device. Long press the button again to power off.

Standby Mode/Screen Save

In the power-on state, Working Indicator Light ① stays green. In standby mode, short press the Menu/OK button to enter the settings menu. If the "Screen Saver" option is enabled (1min/3min/5min), the screen will turn off after the set time without operation. Tap any button to light up the display screen or activate the camera.

3. 180° Rotatable Lens Guide

The M7 Pro camera lens supports 180 degrees of manual rotation. With the lens rotation in camera standby or video mode, the screen's real-time image will automatically adjust to the correct direction.

Note: The lens only supports 180 degrees of rotation. Do NOT rotate it more than 180 degrees, otherwise, the lens and internal cables may be damaged.

Diagram showing the camera lens rotating from 0 degrees, to 90 degrees, to 180 degrees.
Figure 3: 180° Rotatable Lens

Basic Operations

1. Video Recording

Normal Video Recording

In standby, short press the Video Button (Video button icon) to record video. During recording, a red video icon flashes on the top right of the screen, and Working Indicator Light ② flashes red. Press the Video Button again to stop recording and save. Video files are named by date and time and saved in MP4 format.

One Key to Video Recording

From a power-off state, long pressing the Big Front Video Button (Big front video button icon) or Video Button (Video button icon) will activate the camera and immediately start video recording.

Video Locked

During video recording, short press the Up Button (Up button icon) to mark/lock the video. A lock icon will appear on the top middle of the screen. Short press the Up Button again to release/cancel the lock. After locking/unlocking, you need to press the Big Front Video Button (Big front video button icon) or Video Button (Video button icon) to save the video file.

2. Taking Photos

Single Shot

In standby mode, short press the Photo Button (Photo button icon) once. Working Indicator Light ① flashes green once, and one photo is taken. Photo files are named by date and time and saved in JPG format.

Photo Burst Mode

If you set "Continuous Shooting" to "3P/5P/10P" in the menu, short press the Photo Button (Photo button icon) once. Working indicator light flashes green once, and several photos will be taken at one press.

Snapshot

During video recording, short press the Photo Button (Photo button icon) to take a snapshot. Each press will take one photo.

3. Audio Recording

This model can record separate audio files. In standby, short press the Audio Button (Audio button icon) to record audio. During recording, the screen displays a microphone logo and recording details, and Working Indicator Light ② flashes yellow. Press the Audio Button again to stop recording and save. Audio files are named by date and time and saved in WAV format.

4. Night Vision

The infrared night vision is set to "Manual" by default. Long press the IR Button (IR button icon) to turn on/off night vision in standby or video mode.

To activate automatic night vision, go to menu settings and set "Infrared Switch" to "Auto". The camera will then switch to night vision mode automatically based on ambient brightness.

File Management

1. Playback Files on Camera

After recording, you can access the Playback Files Page to review your files.

In standby mode, short press the Down Button (Down button icon) to enter playback mode. Use the Up/Down buttons to select a file list (Video, Photo, Audio) and the Menu/OK button to confirm and play the file.

Short press the Return Button (Return button icon) to return to the previous step or exit the Playback Files Page.

2. File Deletion

To delete files:

  1. Enter the Playback Files Page.
  2. In the file list, use the Up/Down buttons to select the file you want to delete.
  3. Long press the Menu/OK button to bring up the delete option.
  4. Use the Up/Down buttons to select the delete option and confirm with the Menu/OK button.

Note: Locked/marked videos cannot be deleted directly on the camera itself.

3. Connect to Computer

Connect the camera to your computer using the provided USB cable. The camera display will show "Mass Storage". In this state, the camera cannot record videos or perform other operations. A new removable disk for the camera will appear on your computer.

If "Password Protect" is enabled in the menu, you will need to input the password (default is 000000) to access, review, or delete files on the computer.

GPS Function

1. Enabling GPS

If the "GPS" option is enabled during video recording, route information will be collected. This data can be played back with the video using the provided GPS player.

  1. In standby mode, short press the Menu/OK button to enter the menu.
  2. Use the Up/Down buttons to navigate to the "GPS" option.
  3. Press Menu/OK again, then use Up/Down buttons to select "On".
  4. Press Menu/OK to save the change.

After enabling GPS and returning to the previous screen, a white GPS icon will appear in the top right corner of the screen. Go to an open area to successfully locate the GPS. The white GPS icon will turn green once a signal is acquired.

Image showing the BOBLOV M7 Pro camera with a GPS pin icon indicating GPS functionality is enabled.
Figure 4: GPS Function Enabled

Note: When the GPS number is 0, no signal is acquired. A number of 1 or above indicates a signal is acquired. For best results, place the camera in an open area. GPS signal may be weakened by traffic jams, viaducts, tunnels, or metal shielding around the camera.

2. Playback GPS Videos on Computer

The GPS player is compatible only with Windows computers. You need to download the GPS player provided by the manufacturer to play back videos with track information.

Method 1: Download from Website

Visit www.boblov.com and download the "M7/M7 Pro GPS Player Download-GXPlayer" software to your computer desktop.

Screenshot of the BOBLOV website showing a download link for the M7/M7 Pro GPS Player.
Figure 5: GPS Player Download from BOBLOV Website

Method 2: Download from Camera U Disk

Connect the M7 Pro body camera to your computer. Access the camera's U disk and find the "Player_download.txt" file. Copy the link within this file to download the GXPlayer compressed file to your desktop.

Screenshot of a computer's file explorer showing the camera's U disk content, with 'GPS Player Download.txt' highlighted.
Figure 6: GPS Player Download via Camera U Disk

Note: If your computer alerts about a virus, proceed with the download. This is a common alert for unfamiliar files and the file is safe.

Steps to open the player:

  1. After downloading the GPS Player compressed file, unzip it into a new folder on your computer desktop.
  2. Enter this new folder and double-click the file named "sunning" to open the player.

3. GPS Player Interface Introduction

The GPS player interface includes controls for video playback and GPS data visualization.

Screenshot of the GPS Player software interface showing video playback, map, and control buttons.
Figure 7: GPS Player Interface
  1. Play previous video
  2. Pause video
  3. Play next video
  4. Stop Playing Button
  5. Click to choose the video file on your computer to playback
  6. Screenshot
  7. Image Rotation
  8. File List (double click to replay)
  9. Compass
  10. Moving Speed

4. GPS Player Setting Page

Click the setting icon (Setting icon) in the top right corner of the player to access settings. Here you can set the language and choose the Google Map for video playback. When changing map settings, ensure you click the Stop Playing Button first, otherwise the map cannot be changed.

Car Mode

Car Mode enables the camera to start recording automatically when connected to the vehicle's 12Vdc power port using a 12Vdc port charger and the engine starts.

1. Enabling Car Mode

To use the camera as a dash cam:

  1. In standby mode, enter the setting menu.
  2. Set the "Car Mode" option to "On".
  3. Save the change.

2. Installation (Car Suction Set Not Included)

The car suction set is not included in the standard package and must be purchased separately. You will need the M7 Pro Suction Dash Camera Mount and a Car Charger.

Installation Steps:

  1. Attach the car bracket to the M7 Pro Camera.
  2. Lock the snap and secure the camera onto the car windshield.

Note: The suction mount only works on clean and smooth glass surfaces. It may not adhere firmly to rough or frosted glass.

Image showing how to attach the car bracket to the M7 Pro camera. Image showing how to lock the snap and mount the camera on the windshield. Image showing the camera successfully mounted on a car windshield.
Figure 8: Car Mode Installation Steps

Advanced Features

1. Time & Date Setting

There are two methods for setting the time and date:

Manually Setting (when GPS option is Off)

Enter the Menu and find the "Date/Time" option to set the local time and date, then save.

Sync Auto (when GPS option is ON)

  1. Enter the Menu, find the "Time Zone" option, set it to your local time zone (e.g., GMT-08 for US), and save.
  2. Turn on the "GPS" option in the menu and ensure the camera successfully acquires a GPS signal (the white GPS icon turns green). The camera's date and time will then sync to the local correct time.

2. Loop Recording

If the "Loop Recording" option is enabled (default is On), when storage is full, the device will continue recording by overwriting the oldest files. This action will not overwrite videos that are marked/locked. Video recording is saved as clips/fragments to prevent large files from being damaged. The "Video Duration" option in the menu can be set to 5mins, 10mins (default), or 15mins.

3. Camera Password

The "Password Protect" option is available in the menu settings. To enable it, you must first enter the default password (000000), then select "On" and confirm.

If you forget the password, please email our support team at support@boblov.com for assistance.

If "Password Protect" is enabled, you will need to verify the password in the following situations:

  1. When connecting the camera to a computer.
  2. When entering the menu page.
  3. When trying to enter the Playback Files Page.
  4. If you choose to change the camera password, you need to verify the old password (or the default password for a new camera).

4. Rewind / Fast Forward

When playing back video files, short press the Up Button (Up button icon) to rewind and the Down Button (Down button icon) to fast forward. Short press the Up or Down button once to increase the speed by two times. Fast forward and rewind speeds can be adjusted in the range of 2X-8X.

Indicator Lights

The camera features two working indicator lights (① and ②) that provide status information:

Status Working Indicator Light ① Working Indicator Light ②
Charging Solid Blue (If powered on during charging, it will be solid green and blue) /
Fully Charged Blue light Off (If powered on, it will be solid green) /
Power On/Standby Solid Green /
Connecting to Computer Solid Green and Blue /
Video Recording / Red Light Flash
Take Photos Every press will flash green once /
Audio Recording / Yellow Light Flash

Alarm Functions

1. White Light

After powering on, a short press of the IR Button (IR button icon) will turn the White Light on/off.

2. Red-Blue Alarm

In standby mode, long press the Photo Button (Photo button icon) to activate the alarm sound and Red-Blue Flash Lights. Long press the button again to deactivate the alarm sound. A third long press will deactivate the Red-Blue Flash Lights.

Note: If the "Silent Mode" option is enabled in the menu, the camera cannot activate the Red-Blue Alarm feature, as Silent Mode disables the camera beep sound and indicator light.

Specifications

Feature Detail
Image Sensor 2MP CMOS
Chipset Generalplus
Display 2.0"; IPS high resolution 320x240 color display
Video Resolution 3840x2160P30, 2560x1440P30, 2304x1296P30, 1920x1080P30 (default), 1280x720P
Video Format MP4
Photo Size VGA, 3MP, 5MP, 8MP, 10MP, 12MP, 16MP, 21MP, 32MP (default), 40MP
Photo File JPG
Wide Angle 127°
Night Vision Supported; 4 infrared lights
Power Supply 5Vdc/2A
Battery Type Built-in rechargeable 3.8V 4000mAh lithium battery
Use Time 15 Hours of video recording (1080P, Screen & GPS Off)
Charging Time 4 Hours to fully charged using the provided fast charger
Memory Capacity Internal 64GB, 128GB optional
Voice Prompts ON/Off Optional
Screen Saver Off, 1mins, 3min, 5min (default)
Auto Power Off Off, 1mins, 3min, 5min, 10min (default)
USB Port Type Type-C Charging Port
Password Protection Support
Working Temperature Recommend: -5°C ~ +45°C, 23°F ~ +113°F
Storage Temperature Recommend: -10°C ~ +50°C, 14°F ~ +122°F
Waterproof Level Not Applicable
Anti-fall Level 2M
Size 95*60*26mm, 3.7x2.4x1inch
Weight 160g / 5.6oz / 0.35lb
Compatible System Windows XP/7/8 SP3/Vista and Mac 10.5 or above

Troubleshooting

Q: Why did the image direction not change to correct?

A: After rotating the camera lens, it may take 2-3 seconds for the camera to react and automatically correct the image direction.

Q: The camera doesn't power on or stops working.

A:

  1. Connect the charger and USB cable to charge the camera. Check if the problem is resolved after 4 hours of charging.
  2. Verify that the charger and USB cable are operating correctly.
  3. Connect your device to a wall socket and press the power button to check if it powers on.
  4. Use a pin to perform a reset of the camera and re-power on to check again.
  5. If the problem persists, please contact customer service for further help.

Q: Why does the camera stop recording? Can't record video anymore?

A:

  1. Ensure the camera's storage capacity is sufficient for recording. Turn on "Loop Recording" to allow the camera to continuously record by overwriting old files once memory is full.
  2. Physical Double check: Verify that the Video Button is intact and can be pressed down normally.
  3. Format the camera and perform a hard reset, then try recording again.
  4. If the problem persists, please contact customer service for further help.

Q: A video or audio file cannot be played? Or no sound for videos?

A:

  1. Check the menu and turn off the "Record Audio" option if you want sound.
  2. It is recommended to play back videos/audio on a computer using VLC media player.

Q: The camera display is showing red/green.

A:

  1. Turn on and off the night vision through the IR Button (IR button icon) to check again.
  2. Reset the camera and power it on to check.

Q: Why does the LCD screen turn off automatically?

A: The camera enters "Screen Saver" mode by default after 5 minutes of inactivity. To keep the display always on, set the "Screen Saver" option to "Off" in the menu. "Screen Saver" can be set to Off/1min/3min/5min.

Q: Why does the camera shut off automatically?

A: Check if the "Auto Power Off" option in the menu is "On". To keep the camera powered on, set "Auto Power Off" to "Off". "Auto Power Off" can be set to Off/1min/3min/5min/10min (default).

Q: I use a MacBook, can I use the GPS player?

A: The GPS player for the M7 Pro body camera is only suitable for Windows computers.

Q: Why can't 4K video be opened on the computer?

A: 4K video uses the H265 codec. Standard Windows media players may not support H265. Use VLC media player to open 4K videos.

Q: I forgot my password, how to reset it?

A: Contact our support team at support@boblov.com. They can provide a universal password to restore your camera password.

Q: I lost the clips, can I get replacement parts?

A: For spare accessories or replacement parts, please email our after-sale service at support@boblov.com.

User Tips

  • Utilize the 180° rotatable lens for flexible recording angles, whether for personal vlogs, selfies, or capturing specific events.
  • Take advantage of the 4K resolution and 40MP photo capabilities for crisp, detailed footage and evidence collection.
  • For extended use, remember the 15-hour recording time (at 1080P with screen and GPS off) and the quick 4-hour charging time.
  • Consider purchasing the optional car suction mount to use the M7 Pro as a dash cam for daily commutes or travel.
  • When reviewing GPS-enabled videos, ensure you use the official BOBLOV GXPlayer software on a Windows PC for full functionality.

Packaging List

The standard package includes the following items:

Diagram showing all items included in the BOBLOV M7 Pro package: M7 Pro Body Worn Camera, User Manual, Charger Plug, Short 360° Back Clip, USB-C Cable, Long 360° Shoulder Clip, and optional Suction Dash Camera Mount and Car Charger.
Figure 9: BOBLOV M7 Pro Packaging List
  • 1x M7 Pro Body Camera
  • 1x USB-C Cable
  • 1x Fast Charger Plug
  • 1x Short 360° Back Clip
  • 1x Long 360° Shoulder Clip
  • 1x User Manual (PDF available online: View PDF)

Please note: Accessories may be updated without prior notice. Please refer to the actual receipt of the items.

Customer Service / Support

BOBLOV is dedicated to offering the best service to our valuable customers. For customer service inquiries, please use the following contact information:


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.