RUSH AGC 5V DC MIC Microphone

Contents

RUSH AGC 5V DC MIC Microphone Instruction Manual

Model: AGC 5V DC MIC Microphone | Brand: RUSH

Introduction

The RUSH AGC 5V DC MIC Microphone is a compact and high-performance audio module designed specifically for FPV (First Person View) drone applications. It is suitable for use with RUSH TANK Mini FPV Transmitters (VTX) and other compatible quadcopter/multirotor systems. This microphone features built-in Automatic Gain Control (AGC) for fast response and effective suppression of ambient noise, ensuring high-quality audio without complex setup. Its ultra-small size allows for easy integration into tight spaces, and the onboard linear power supply helps eliminate audio background noise.

Specifications

FeatureDetail
Brand NameRUSH
Model NameAGC MIC
Working Voltage5V DC
ApplicationFPV Drone Transmitter (e.g., RUSH TANK Mini VTX)
Dimensions (W x D x H)12mm x 6.5mm x 2.6mm
Weight0.3g
MaterialComposite Material
Special FeaturesAutomatic Gain Control (AGC), Onboard Linear Power Supply, Anti-interference

Package Contents

The package includes:

  • 1x RUSH AGC MIC Microphone Module

Installation Guide

The RUSH AGC MIC Microphone is designed for easy installation due to its ultra-small form factor. Follow these steps for proper integration with your FPV system, particularly with RUSH TANK Mini VTX units.

1. Pinout Identification

Identify the pin connections on the microphone module. The module has three main connection points:

  • GND: Ground connection.
  • +5V: Power input, requires 5V DC.
  • AUD (Audio): Audio output signal.
Top and bottom view of RUSH AGC MIC Microphone with pinout labels for GND, +5V, and AUDIO.
Figure 1: RUSH AGC MIC Microphone Pinout Diagram (Top and Bottom Views)

For non-visual users: The microphone module is a small rectangular PCB. On the top side, the pins are labeled GND, +5V, and AUD. On the bottom side, the corresponding pads are also labeled AUDIO, +5V, and GND, indicating the connection points for soldering or wiring.

2. Wiring to RUSH TANK Ultimate Mini VTX

Connect the microphone module to your Video Transmitter (VTX) according to the wiring diagram provided. Ensure correct polarity for power connections (+5V and GND) and connect the audio output to the VTX's audio input.

Wiring diagram showing connections from RUSH AGC MIC to RUSH TANK Ultimate Mini VTX. MIC GND connects to VTX GND, MIC +5V connects to VTX +5V, and MIC AUD connects to VTX SmartAudio or Audio In.
Figure 2: Wiring Diagram for RUSH AGC MIC with RUSH TANK Ultimate Mini VTX

For non-visual users: The wiring diagram illustrates connecting the RUSH AGC MIC to a RUSH TANK Ultimate Mini VTX. The microphone's GND pin connects to the VTX's GND. The microphone's +5V pin connects to the VTX's +5V output. The microphone's AUD (Audio) pin connects to the VTX's SmartAudio or Audio In pin. The VTX also has connections for VIDEO-IN, 7-36V IN, and additional GND points.

Caution: Incorrect wiring, especially reversed polarity for +5V and GND, can damage the microphone module and/or the VTX. Always double-check connections before applying power.

Operation

The RUSH AGC MIC Microphone is designed for plug-and-play operation with compatible FPV video transmitters. Once correctly installed and powered, it will automatically provide high-quality audio to your FPV feed.

  • Automatic Gain Control (AGC): The built-in AGC feature automatically adjusts the microphone's sensitivity to maintain a consistent audio level, reducing concerns about varying ambient noise during flight.
  • Noise Reduction: The onboard linear power supply and anti-interference design work together to minimize audio background noise, providing a clearer sound experience.
  • No Configuration Required: High-quality audio is available immediately upon connection without the need for additional software settings or adjustments.

Care and Maintenance

To ensure the longevity and optimal performance of your RUSH AGC MIC Microphone, follow these simple maintenance guidelines:

  • Keep Dry: Avoid exposing the module to moisture or liquids, as this can cause short circuits and damage.
  • Clean Gently: If cleaning is necessary, use a soft, dry cloth. Do not use harsh chemicals or solvents.
  • Handle with Care: The module is small and delicate. Avoid dropping it or subjecting it to excessive physical shock.
  • Proper Storage: Store the microphone in a dry, dust-free environment when not in use.

Troubleshooting

If you encounter issues with your RUSH AGC MIC Microphone, refer to the following common problems and solutions:

ProblemPossible CauseSolution
No audio output
  • Incorrect wiring (GND, +5V, AUD).
  • No power to the module.
  • Faulty VTX audio input.
  • Damaged microphone module.
  • Verify all wiring connections against the diagram (Figure 2).
  • Ensure the VTX is supplying stable 5V DC to the microphone.
  • Test the VTX audio input with another known-good audio source if possible.
  • Inspect the microphone module for visible damage.
Noisy or distorted audio
  • Ground loop issues.
  • Electrical interference from other components.
  • Loose connections.
  • Ensure all grounds are common and properly connected.
  • Try to physically separate the microphone module and its wiring from high-current or noisy components (e.g., ESCs, motors).
  • Check all solder joints and connections for looseness.
Low audio volume
  • Insufficient power supply.
  • VTX audio input sensitivity setting (if applicable).
  • Confirm the microphone is receiving a stable 5V DC.
  • Check your VTX or flight controller settings for any adjustable audio input gain.

User Tips

  • Placement: For best audio clarity, try to mount the microphone away from direct airflow from propellers and vibrating components like motors.
  • Testing: Always perform a bench test of your FPV system with the microphone connected before flying to ensure audio is clear and functional.
  • Cable Management: Use short, shielded wires for audio connections if possible to minimize interference.

Product Video

Video: Overview of the RUSH AGC 5V DC MIC Microphone module, showcasing its features and compact design.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official RUSH FPV website or contact your authorized dealer. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.