Miwayer MA-5

Contents

Miwayer MA-5 Mini Guitar Amplifier

Model: MA-5

Introduction

Thank you for choosing the Miwayer MA-5 Mini Guitar Amplifier. This compact and portable 5W amplifier is designed for both acoustic and electric guitars, offering a convenient solution for practice and small jam sessions. It features a 6.35mm input, 1/4 inch headphone output, and controls for volume and tone, allowing you to customize your sound. Its lightweight design, complete with a shoulder strap and belt clip, makes it easy to carry anywhere.

Setup Guide

1. Powering the Amplifier

The MA-5 amplifier supports dual power supply options: a 9V battery or a DC 9V power adapter. Please note that neither the battery nor the adapter is included with the amplifier.

  • Battery Installation: Locate the battery compartment on the rear of the amplifier. Open the cover, insert a 9V battery, ensuring correct polarity, and close the cover securely.
  • DC Power Adapter: If using a DC 9V power adapter (not included), plug it into the DC 9V input jack located on the side of the amplifier.
Rear view of the amplifier showing the battery compartment and DC 9V power input.
Figure 1: Rear view showing battery compartment and DC 9V input.

2. Connecting Your Instrument

Connect your electric or acoustic guitar to the amplifier using a standard 6.35mm (1/4 inch) instrument cable. Plug one end into your guitar and the other into the 'INPUT' jack on the front panel of the amplifier.

Amplifier connected to a guitar, illustrating the 6.35mm input.
Figure 2: Amplifier connected to a guitar via the 6.35mm input.

3. Headphone Connection

For private practice, you can connect a pair of headphones to the 1/4 inch headphone output jack located on the front panel. This will mute the main speaker output.

Close-up of the control panel with Input, Volume, Tone, and Power/Function controls, and headphone output.
Figure 3: Control panel showing input, headphone output, and control knobs.

4. Portability Features

The amplifier comes with a shoulder strap and features a backside clip for convenient carrying. Attach the shoulder strap to the designated loops on the amplifier, or use the clip to secure it to your belt or bag.

Amplifier being carried with a shoulder strap, showing the back clip.
Figure 4: Amplifier with shoulder strap and belt clip for portability.

Operating Instructions

  1. Power On: Once your instrument is connected and power is supplied, flip the 'POWER FUNCTION' switch to the 'ON' position. The power indicator light should illuminate.
  2. Adjust Volume: Use the 'VOLUME' knob to control the overall output level of the amplifier. Start with a low volume and gradually increase it to your desired level.
  3. Adjust Tone: Use the 'TONE' knob to adjust the tonal characteristics of your sound. Turning it clockwise typically brightens the sound, while turning it counter-clockwise makes it warmer.
  4. Using Headphones: If headphones are plugged into the headphone output, the main speaker will be muted, allowing for silent practice. Adjust the volume using the 'VOLUME' knob.
  5. Power Off: When you are finished using the amplifier, flip the 'POWER FUNCTION' switch to the 'OFF' position. Disconnect your instrument and power supply.

Maintenance

  • Cleaning: Wipe the amplifier's exterior with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the finish.
  • Battery Replacement: If using battery power, replace the 9V battery when the sound becomes weak or distorted, or if the power indicator light dims. Always dispose of used batteries responsibly.
  • Storage: Store the amplifier in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If storing for an extended period, remove the battery to prevent leakage.
  • Handling: Handle the amplifier with care. Avoid dropping it or subjecting it to strong impacts.

Troubleshooting

Problem Possible Cause Solution
No sound output
  • Amplifier not powered on.
  • Volume knob set to minimum.
  • Instrument cable not connected properly.
  • Dead or low battery.
  • Headphones plugged in.
  • Ensure 'POWER FUNCTION' switch is ON.
  • Increase 'VOLUME' knob.
  • Check all cable connections.
  • Replace 9V battery or use DC adapter.
  • Unplug headphones if you want sound from the speaker.
Distorted or weak sound
  • Low battery power.
  • Volume set too high.
  • Tone settings are extreme.
  • Faulty instrument cable.
  • Replace 9V battery or use DC adapter.
  • Reduce 'VOLUME' knob.
  • Adjust 'TONE' knob to a balanced setting.
  • Try a different instrument cable.

Specifications

  • Model: MA-5
  • Power Output: 5W
  • Input: 6.35mm (1/4 inch) Instrument Input
  • Headphone Output: 1/4 inch Headphone Output
  • Controls: Volume, Tone, Power Function Switch
  • Power Supply: 9V Battery (not included) or DC 9V Power Adapter (not included)
  • Color: Black
  • Item Size: 12.5 cm x 6 cm x 12.5 cm (Length x Width x Height)
  • Package Weight: Approximately 402g
Front view of the amplifier with dimensions 12.5cm x 6cm x 12.5cm.
Figure 5: Amplifier dimensions.

User Tips

  • For extended practice sessions, consider using a DC 9V power adapter to conserve battery life.
  • The headphone output is excellent for quiet practice without disturbing others.
  • Experiment with the 'TONE' knob to find the sound that best suits your instrument and musical style.
  • Utilize the shoulder strap or belt clip for maximum portability, allowing you to practice anywhere.

Warranty and Support

For any questions, technical support, or warranty inquiries regarding your Miwayer MA-5 Mini Guitar Amplifier, please contact the seller or retailer from whom you purchased the product. Please retain your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.