1. Introduction
Thank you for choosing the Rawm SH01s Wireless Gaming Mouse. This high-performance mouse is designed for competitive gaming, offering a lightweight design, advanced sensor technology, and versatile connectivity options. This manual provides essential information for setup, operation, maintenance, and troubleshooting to ensure you get the most out of your device.
2. Product Overview
The Rawm SH01s is engineered for precision and speed, featuring a lightweight design of approximately 60g and a high-performance PAW3395 sensor. It supports three-mode connectivity (2.4G wireless, Bluetooth, and wired) and offers a high polling rate for responsive gameplay. Key features include:
- PAW3395 Sensor: Flagship sensor with up to 26000 DPI, 650 IPS, and 50G acceleration.
- Lightweight Design: Approximately 60g, suitable for small and medium-sized hands.
- Three-mode Connection: Seamless switching between 2.4G wireless, Bluetooth, and wired modes.
- Hot-swappable Micro-switches: Customize your click feel with compatible micro-switches (e.g., Huano Green White Radiant Dot, Kailh, TTC).
- High Polling Rate: Supports up to 1000Hz wirelessly, with an option for 8000Hz using a separately purchased 8K receiver.
- Long Battery Life: Approximately 100 hours of continuous use on a single charge (SH01s model).
- Renmo HUB Software: For advanced customization of DPI, polling rate, macro definitions, and Lift-Off Distance (LOD).
3. Setup
3.1 Connecting the Mouse
The Rawm SH01s supports three connection modes: 2.4G wireless, Bluetooth, and wired.
- 2.4G Wireless Mode: Insert the 2.4G receiver into an available USB port on your computer. The mouse should automatically connect. The 2.4G receiver can be stored in a dedicated compartment at the bottom of the mouse when not in use to prevent loss.
- Bluetooth Mode: Activate Bluetooth on your device. Put the mouse into Bluetooth pairing mode (refer to the mouse's physical switch or button combination for specific instructions, usually indicated by a blinking LED). Select the mouse from your device's Bluetooth settings to pair.
- Wired Mode: Connect the mouse to your computer using the provided USB cable. This mode also charges the mouse.
3.2 Software Installation (Renmo HUB)
For full customization and to unlock advanced features, download and install the Renmo HUB setting driver software from the official Rawm website. This software allows you to adjust DPI, polling rate, macro definitions, and other settings.
4. Operating Instructions
4.1 DPI Adjustment
The mouse features a PAW3395 sensor with a maximum DPI of 26000. You can adjust the DPI settings through the Renmo HUB software to match your preference and game requirements. The software allows for independent adjustment of X and Y-axis sensitivity.
4.2 Polling Rate (Rate of Return)
The SH01s supports a wireless polling rate of 1000Hz by default. For an even faster response, an 8KHz polling rate is available with a separately purchased 8K receiver. Adjust the polling rate via the Renmo HUB software. Note that changing the polling rate may require restarting the mouse.
4.3 Hot-swappable Micro-switches
The SH01s features hot-swappable micro-switches, allowing you to easily change the click feel and extend the mouse's lifespan. The mouse comes with Hua Nuo Green Transparent Fretting micro-movements, rated for 0.1 billion clicks. Refer to the diagram for compatible micro-switches.
4.4 Macro Definition
Utilize the Renmo HUB software to define custom macros for various buttons, enhancing your gaming efficiency and personalized experience.
4.5 Lift-Off Distance (LOD) Adjustment
The operating height (LOD) of the SH01s can be adjusted through the software. This allows the mouse to adapt to different mouse pad materials, ensuring consistent tracking performance.
5. Maintenance
5.1 Cleaning
To maintain optimal performance, regularly clean your mouse. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no moisture enters the internal components. Avoid harsh chemicals or abrasive materials.
5.2 Battery Care
The SH01s has a built-in 600mAh battery. A full charge takes approximately 3 hours and provides about 100 hours of continuous use. To prolong battery life, avoid fully discharging the mouse frequently and store it in a cool, dry place when not in use for extended periods.
6. Troubleshooting
- Mouse not responding: Ensure the mouse is charged. Check the connection mode (2.4G receiver, Bluetooth pairing, or wired cable). Try a different USB port or re-pair the Bluetooth connection.
- Lag or stuttering: Ensure the 2.4G receiver is close to the mouse and not obstructed. Check for interference from other wireless devices. If using 8KHz polling, ensure your system meets the recommended specifications (CPU: Intel i7 9700K/AMD R7 3700X or above, Display: refresh rate 240Hz or above, Graphics: NVIDIA GTX1080/AMD RX5700 or above, Memory: 16GB or more).
- Custom settings not applying: Ensure the Renmo HUB software is running and the settings are saved. Restart the mouse after applying certain changes like polling rate.
- Unexpected behavior: Try resetting the mouse to factory defaults via the software.
7. Specifications
The following table details the specifications for the Rawm SH01s mouse:
| Feature | SH01s |
|---|---|
| Dimensions | Length 117.7mm * Width 61.2mm * Height 38.1mm |
| Surface | Skin-like coating |
| Sensor | PAW3395 |
| Master control chip | PAN1080 |
| Transmission technology | RAWM Speed Wireless |
| Rate of return | 125~1000Hz (8K receiver required for more than 1K, and 8K will be launched in August) |
| Drive | Windows Driver | Web Driver iOS | Android |
| Battery | 600mAh |
| Continuous battery life | ~100 hours (1000Hz) |
| Weight | 60g ± 2g (without receiver) |
| Left and right key fretting | Hua Nuo Green White Radiance Dot |
| Roller | F-switch (2 million games only) |
| Foot pad | PTFE Foot Pad |
| Connection mode | Wired/2.4G/Bluetooth |
| 2.4G Receiver | 1K receiver (8K receiver sold separately) |
| Whether to support 8K | Support (Nordic's 8K receiver is not universal) |
Note: The 60g measurement result is laboratory data, excluding the receiver, and the weight has an error of about 2G. Please refer to the actual product. Functional data can be realized in Windows mode; product function and performance data are from laboratory tests.
8. User Tips
- Optimize for Grip: The mouse is designed for small to medium-sized hands and supports various grip styles. Experiment with different grips (palm, claw, fingertip) to find what feels most comfortable and effective for your play style.
- Software Customization: Don't forget to install the Renmo HUB software. It's crucial for fine-tuning DPI, polling rate, button assignments, and macros to personalize your gaming experience.
- Micro-switch Experimentation: Take advantage of the hot-swappable micro-switches. If you prefer a different click feel or if a switch wears out, you can easily replace it with a compatible alternative.
9. Warranty and Support
For warranty information, technical support, or further assistance, please refer to the seller's official website or contact customer service. Keep your proof of purchase for any warranty claims.