Introduction
This manual provides comprehensive instructions for the operation and maintenance of your RG10A(B2S)/BGEF remote control for Midea Air Conditioners. Please read this manual carefully before using the remote control to ensure proper function and to extend the product's lifespan.
Product Overview
The RG10A(B2S)/BGEF remote control is designed to provide convenient control over your Midea air conditioning unit. It features a clear LCD display with backlight, and buttons for various functions including temperature adjustment, mode selection, fan speed, swing, boost, LED display control, and a clean function. It supports both Fahrenheit and Celsius temperature settings.
Button Functions:
- Power (Yellow Button): Turns the air conditioner ON or OFF.
- Mode: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- SET / OK: Used for confirming selections or accessing advanced settings.
- Up/Down Arrows: Adjusts temperature settings, timer, or other numerical values.
- Left/Right Arrows: Navigates through options or settings.
- Fan: Adjusts the fan speed (e.g., Low, Medium, High, Auto).
- Swing: Activates or adjusts the air swing function.
- Boost: Activates a rapid cooling or heating function.
- LED: Controls the display light on the air conditioner unit.
- Clean: Initiates the self-cleaning function of the air conditioner (if available).
- ECO/GEAR: Activates energy-saving mode or adjusts fan gear.
Setup
Battery Installation:
- Open the battery compartment cover on the back of the remote control.
- Insert two AAA batteries (not included), ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Close the battery compartment cover securely.
Important: The remote control requires 3VDC. To prevent damage, remove the batteries when the remote control is not being used for a long time.
Operating Instructions
Basic Operation:
- Power On/Off: Press the yellow Power button to turn the air conditioner on or off.
- Selecting Operating Mode: Press the 'Mode' button repeatedly to cycle through available modes (Auto, Cool, Dry, Fan, Heat). The selected mode will be displayed on the LCD screen.
- Adjusting Temperature: Use the 'Up' and 'Down' arrow buttons to set your desired temperature.
- Adjusting Fan Speed: Press the 'Fan' button to cycle through different fan speeds (e.g., Auto, Low, Medium, High).
- Activating Swing Function: Press the 'Swing' button to activate or adjust the louver swing direction.
Advanced Functions:
- Boost Function: Press the 'Boost' button for rapid cooling or heating. This function typically operates at maximum power for a set period.
- LED Display Control: Press the 'LED' button to turn the air conditioner's display light on or off.
- Clean Function: If your AC unit supports it, press the 'Clean' button to activate the self-cleaning feature. Refer to your AC unit's manual for details on this function.
- Backlight: The remote's display features a backlight for use in low-light conditions. The backlight typically activates automatically when any button is pressed and remains on for a few seconds.
- Fahrenheit/Celsius Setting: To switch between Fahrenheit (°F) and Celsius (°C), typically press and hold the 'Up' and 'Down' temperature buttons simultaneously for a few seconds, or a specific combination of buttons not explicitly marked. Refer to your AC unit's manual if this remote function is not immediately apparent.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Care: Replace batteries when the display becomes dim or the remote's range decreases. Always replace both batteries at the same time with new ones of the same type.
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage.
Troubleshooting
- Remote Not Responding: Check if the batteries are correctly inserted and have sufficient charge. Replace batteries if necessary. Ensure there are no obstructions between the remote and the air conditioner's receiver.
- Limited Range: This may indicate low battery power. Replace batteries.
- Incorrect Temperature Display: If the temperature unit (Fahrenheit/Celsius) is incorrect, refer to the 'Fahrenheit/Celsius Setting' in the Operating Instructions section to switch it.
- AC Unit Not Performing Function: Ensure the remote is pointed directly at the AC unit. If the AC unit still does not respond, check the AC unit's power supply and its own manual for troubleshooting.
Specifications
| Feature | Detail |
|---|---|
| Model | RG10A(B2S)/BGEF |
| Compatible Brand | Midea |
| Rated Voltage | 3VDC |
| Wireless Communication | IR (Infrared) |
| Power Source | 2 x AAA Batteries (not included) |
| Approximate Dimensions (L x W x H) | 15 cm x 10 cm x 10 cm |
| Approximate Weight | 0.09 kg |
| Origin | Mainland China |
User Tips
- For optimal performance, use high-quality alkaline batteries.
- Ensure a clear line of sight between the remote control and the air conditioner unit for reliable operation.
- If the remote feels sluggish or buttons require multiple presses, it's often a sign that the batteries need to be replaced.
Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your Midea air conditioner unit or contact the original seller. The remote control is manufactured by WYMECT.
