Langtu LT75 Pro

Contents

Langtu LT75 Pro Wireless Gaming Mechanical Keyboard User Manual

Model: LT75 Pro | Brand: Langtu

1. Introduction

Welcome to the Langtu LT75 Pro Wireless Gaming Mechanical Keyboard user manual. This keyboard is designed for gamers and enthusiasts, featuring a three-mode connection (Bluetooth, 2.4G wireless, and wired Type-C), full-key hot-swappable switches, dynamic RGB lighting, and an intelligent TFT color screen. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your new keyboard.

Langtu LT75 Pro Mechanical Keyboard with full-color smart screen, 10000mAh battery, and three-mode connection.

Figure 1: Langtu LT75 Pro Mechanical Keyboard Overview

2. Setup

2.1 Package Contents

Please ensure all items are present:

  • Langtu LT75 Pro Mechanical Keyboard
  • USB Type-C Cable
  • 2.4G Wireless Receiver
  • Keycap/Switch Puller (if included)
  • User Manual (this document)

2.2 Connection Methods

The LT75 Pro supports three connection modes:

  1. Wired Connection: Connect the keyboard to your device using the provided USB Type-C cable. This mode also charges the keyboard.
  2. 2.4G Wireless Connection: Insert the 2.4G wireless receiver into a USB port on your device. The keyboard should automatically connect.
  3. Bluetooth Connection: Turn on Bluetooth on your device. Put the keyboard into Bluetooth pairing mode (refer to the operating section for specific key combinations). Select 'Langtu LT75 Pro' from your device's Bluetooth list to pair.
Diagram showing three-mode connection options: Bluetooth, 2.4G, and Type-C wired, compatible with Mac and Windows.

Figure 2: Three-Mode Connection Options

2.3 Initial Charge

It is recommended to fully charge the keyboard before first use. Connect the keyboard via the USB Type-C cable to a power source. The intelligent color screen will display the charging status and battery level.

Close-up of the keyboard's side showing the Type-C interface for charging and wired connection.

Figure 3: Key-line Separation Type-C Interface

3. Operating Instructions

3.1 Switching Connection Modes

The keyboard features a visual mode system switching function, often controlled via the intelligent color screen and a dedicated knob or function keys. Refer to the on-screen prompts or the keyboard's function key combinations (e.g., Fn + 1/2/3 for Bluetooth, 2.4G, Wired) to switch between modes.

Image showing the keyboard's visual mode system switching capability, compatible with Windows and Mac.

Figure 4: Visual Mode System Switching

3.2 Intelligent Color Screen & Knob Functions

The 1.14-inch high-definition color screen provides real-time information such as connection mode, battery level, and active profiles. The metal knob allows for multi-mode adjustment:

  • System switching
  • Lighting effects adjustment
  • Volume adjustment
  • Language selection
  • Sleep mode settings
Close-up of the keyboard's metal knob and TFT screen, illustrating multi-mode adjustment options.

Figure 5: Multi-mode Adjustment Knob and TFT Screen

3.3 RGB Lighting Effects

The keyboard features dynamic music rhythm RGB lighting with over 16 million colors. You can customize lighting effects through the keyboard's onboard controls (via the knob/screen) or the dedicated software driver.

Keyboard displaying vibrant RGB lighting with a musical rhythm visualization on the screen.

Figure 6: Dynamic RGB Lighting Effects

3.4 Hot-Swappable Switches

The LT75 Pro features a full-key hot-swappable design, allowing you to easily change mechanical switches without soldering. It is compatible with most 3/5 pin mechanical switches on the market.

  1. Use the provided switch puller to carefully remove the existing switch.
  2. Align the pins of the new switch with the sockets on the PCB.
  3. Gently press the new switch into place until it clicks. Ensure it is seated firmly.
Diagram illustrating the hot-swappable switch design, showing a switch being inserted into the PCB.

Figure 7: Hot-Swappable Switch Design

3.5 Custom Driver Software

For advanced customization, download and install the official Langtu driver software. This software allows for personalized function management, custom upload of pictures and GIFs to the TFT screen, full-key remapping, multimedia function control, and setting up sleep modes.

Screenshot of the custom driver software interface for the LT75 Pro, showing key remapping and display settings.

Figure 8: Custom Driver Software Interface

3.6 Automatic Hibernation

The keyboard is equipped with automatic hibernation technology to conserve battery life:

  • 2 Minutes Inactivity: The backlight automatically enters sleep mode.
  • 10 Minutes Inactivity: The keyboard enters automatic deep sleep mode.

The keyboard can be awakened immediately by pressing any key.

Table explaining automatic hibernation technology: backlight sleep after 2 minutes, deep sleep after 10 minutes.

Figure 9: Automatic Hibernation Details

4. Maintenance

4.1 Cleaning

  • Keycaps: Use the provided keycap puller to remove keycaps. Clean them with a mild soap solution and a soft cloth, then dry thoroughly before reattaching.
  • Keyboard Body: Wipe the keyboard surface with a soft, damp, lint-free cloth. Avoid harsh chemicals or abrasive materials.
  • Between Keys: Use compressed air to remove dust and debris from between the keys.

4.2 Storage

When not in use for extended periods, store the keyboard in a dry, cool place away from direct sunlight and extreme temperatures. Ensure the keyboard is turned off to preserve battery life.

5. Troubleshooting

5.1 Keyboard Not Responding

  • Wired Mode: Ensure the USB Type-C cable is securely connected to both the keyboard and the computer. Try a different USB port or cable.
  • 2.4G Wireless Mode: Ensure the 2.4G receiver is properly inserted and the keyboard is in 2.4G mode. Try re-pairing by cycling the keyboard's power or re-inserting the receiver.
  • Bluetooth Mode: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth pairing mode. Forget the device on your computer and re-pair.
  • Battery: Check the battery level on the TFT screen. If low, connect the keyboard to charge.

5.2 RGB Lighting Not Working

  • Check the keyboard's onboard lighting controls (via knob/screen) to ensure RGB is enabled and brightness is up.
  • Verify settings in the custom driver software.
  • Ensure the keyboard's battery is sufficiently charged.

5.3 Keys Not Registering

  • If specific keys are not working, try removing and re-seating their switches. Ensure the switch pins are not bent.
  • Clean any debris from around the affected switches.
  • If the issue persists, consider replacing the faulty switch.

6. Specifications

FeatureDetail
Product NameLT75 Pro Three-Mode Color Screen Mechanical Keyboard
Keyboard Standard82 Key
Connection MethodWireless 2.4G, Bluetooth, Wired (Type-C)
Compatibility SystemWindows, MacOS, iOS, Android
Operation StyleMechanical
Switches Hot SwapYes (Full key hot swappable, compatible with 3/5 pin tripods)
Keycap MaterialPBT plastic (CSA height)
Keycap PrintingDye-sublimation, Two-color injection molding, Gradient side engraving, Five-sided thermal sublimation + PC transparent keycaps
Screen1.14-inch High-Definition Color Screen
Backlight TypeMULTICOLOR RGB (More than 16 million colors, dynamic music rhythms)
Battery Capacity10000mAh
Keyboard StructureGasket structure with 7-layer acoustic filling
ApplicationDesktop, Laptop, Number, Tablet
LanguageEnglish
Parameter table for the LT75 Pro keyboard, detailing color matching, shaft body, keyboard configuration, internal filling, keycap height, manufacturing process, screen, lighting, battery, and connection.

Figure 10: Detailed Parameter Table

6.1 Shaft Body Parameters

Shaft TypeDescriptionTotal StrokeConduction StrokeContact Pressure
CUIYIN ShaftFive-pin linear axis, light guide column, dust-proof wall, POM axis center, HIFI mahjong sound, light press pressure, smooth feel, quick rebound, ultra-fast trigger.3.3mm ± 0.3mm1.3mm ± 0.5mm50gf (Conduction: 38gf)
Macaron ShaftFive-pin Linear Shaft, light Guide Column, dust-proof Wall, extended Spring, quick Trigger to Confirm The Feel, steady pebble sound, moderate pressing force, strong confirmation of touch.3.3mm ± 0.3mm1.5mm ± 0.3mm40gf ± 2gf (Conduction: 50gf ± 5g)
Radish ShaftFive-pin linear shaft, PA12 shaft center, light guide column, dust-proof, smooth hand feel, light pressing force, linear axis, quick trigger, moderate pressing force, clear bottom touch, key sound as pleasant as a wooden fish.3.3mm ± 0.3mm1.8mm ± 0.5mm38gf ± 10gf (Conduction: 48gf ± 5gf)
Detailed specifications for CUIYIN, Macaron, and Radish shaft types, including total stroke, conduction stroke, and contact pressure.

Figure 11: Shaft Body Parameters

7. User Tips

  • Experiment with Switches: Take advantage of the hot-swappable design to try different switch types to find your preferred typing or gaming feel.
  • Customize Your Display: Use the custom driver software to upload personalized GIFs or images to the TFT screen for a unique touch.
  • Optimize Battery Life: Utilize the automatic hibernation features and remember to turn off the keyboard when not in use for extended periods to maximize battery longevity.
  • Driver Updates: Periodically check the official Langtu website for updated driver software to ensure optimal performance and access to new features.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's policy or contact the manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.