Introduction
Thank you for choosing the iWALK Linkpod4 Portable Power Bank. This compact and lightweight power bank is designed to provide convenient and hassle-free charging for your mobile devices on the go. With a 4500mAh capacity and an integrated plug, it's an ideal solution for keeping your devices powered throughout the day. Please read this manual carefully to ensure proper use and maintenance of your device.
The iWALK Linkpod4 is designed to be small and lightweight, making it easy to carry.
Setup
Before using your iWALK Linkpod4 for the first time, it is recommended to fully charge the power bank.
- **Charging the Power Bank:**
- Locate the USB-C input port on the side of the power bank.
- Connect a USB-C charging cable (included) to the power bank's input port.
- Plug the other end of the USB-C cable into a compatible USB power adapter (not included) and connect it to a wall outlet.
- The indicator lights on the power bank will illuminate to show the charging status. Once all lights are solid, the power bank is fully charged.
The power bank supports pass-through charging, allowing it to charge itself and a device simultaneously.
- **Identifying Your Linkpod4 Model:**
- The Linkpod4 comes in two main variants: one with a built-in Lightning connector (DBL4500L series) for iPhones and another with a built-in USB-C connector (DBL4500C series) for Android and other USB-C devices.
- Please check the connector type on your specific Linkpod4 model to ensure compatibility with your device.
Linkpod4 with USB-C output.
Linkpod4 with Lightning output.
Operating Instructions
- **Charging Your Device:**
- Remove the protective cap from the integrated connector (Lightning or USB-C) on the power bank.
- Carefully plug the power bank's connector directly into your smartphone or other compatible device's charging port.
- The device should begin charging automatically. The power bank's indicator lights will show its remaining battery level.
- To stop charging, simply unplug the power bank from your device.
Plug the power bank directly into your device to begin charging.
- **Pass-Through Charging:**
- The iWALK Linkpod4 supports pass-through charging. This means you can charge your phone while the power bank itself is being recharged.
- First, connect the power bank to your phone.
- Then, connect the power bank to a power adapter using a USB-C cable. Both your phone and the power bank will charge simultaneously.
- **Charging Other Small Devices (e.g., AirPods):**
- The compact design also allows for charging smaller devices like wireless earbuds.
- Simply plug the power bank into the charging port of your compatible earbud case.
Demonstration of plugging in the iWALK Linkpod4 to charge a smartphone and AirPods.
- **Portability and Convenience:**
- The Linkpod4's lipstick-sized design makes it easy to carry in pockets, purses, or backpacks without adding bulk.
- Its integrated plug eliminates the need for extra cables, offering a clean and efficient charging experience.
Small enough to fit in a pocket for ultimate portability.
Maintenance
- **Cleaning:** Use a soft, dry cloth to wipe the surface of the power bank. Do not use liquid cleaners or abrasive materials.
- **Storage:** Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
- **Battery Care:** To prolong battery life, fully charge the power bank at least once every three months if not in regular use. Avoid completely draining the battery frequently.
- **Handling:** Avoid dropping or subjecting the power bank to strong impacts.
Troubleshooting
- Power bank is not charging:
- Ensure the USB-C charging cable is securely connected to both the power bank and the power adapter.
- Verify that the power adapter is functioning correctly and the wall outlet has power.
- Try using a different USB-C cable and power adapter.
- Device is not charging from the power bank:
- Check if the power bank has sufficient charge (indicator lights).
- Ensure the power bank's integrated connector is fully and correctly inserted into your device's charging port.
- Verify that your Linkpod4 model (Lightning or USB-C) is compatible with your device's charging port.
- Remove any thick phone cases that might prevent a proper connection.
The Linkpod4 is designed to support thicker phone cases.
- Slow charging:
- Ensure both the power bank and your device are not being used heavily during charging.
- Check the power adapter used to charge the power bank; a higher wattage adapter may charge it faster.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | iWALK |
| Model | Linkpod4 (DBL4500L / DBL4500C Series) |
| Battery Capacity | 4500mAh |
| Battery Type | Lithium Ion Battery |
| Input Interface | USB Type C |
| Output Interface | Lightning (DBL4500L) / USB-Type C (DBL4500C) |
| Shell Material | Plastic |
| Features | Built-in Plug, Pass-Through Charging |
| Origin | Mainland China |
Warranty and Support
The iWALK Linkpod4 Portable Power Bank comes with a manufacturer's warranty. For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official iWALK website.
If you encounter any issues or have questions regarding your product, please contact iWALK customer support or the retailer from whom you purchased the device.
