Coolpie CR311

Contents

Coolpie CR311 3-in-1 SSD Cloner Instruction Manual

Model: CR311

Brand: Coolpie

1. Introduction

The Coolpie CR311 is a versatile 3-in-1 SSD Cloner and M.2 Reader designed for efficient data management. This device allows for seamless reading, writing, and offline cloning across various storage protocols, including M.2 NVMe, M.2 SATA, mSATA, and traditional SATA 2.5''/3.5'' HDDs. Its tool-free design and wide compatibility make it an ideal solution for personal and home use, offering high-speed data transfer and duplication capabilities.

2. Product Overview & Features

Versatile SSD Duplicator - Ideal for Personal & Home Use

The Coolpie CR311 offers unparalleled ease and efficiency for data manipulation. It supports a wide range of M.2 sizes and traditional SATA drives, providing a comprehensive solution for your storage needs.

Coolpie CR311 with two M.2 SSDs inserted, showing Source/Target labels and clone progress lights.
Coolpie CR311 with two M.2 SSDs inserted, indicating Source and Target slots, and clone progress lights.

Key Features:

  • 3-in-1 Functionality: Supports M.2 NVMe, M.2 SATA, mSATA, and SATA 2.5''/3.5'' HDD/SSD.
  • High-Speed Transfer: USB 3.2 Gen2*2 interface provides up to 20Gbps data transfer speed.
  • Offline Clone: Standalone cloning capability without requiring a computer connection.
  • Tool-Free Design: Easy direct plugging for quick installation of drives.
  • Large Capacity Support: Capable of handling up to 22TB of data.
  • Wide Compatibility: Compatible with Windows, macOS, and Linux operating systems, and various devices like PS4, Laptops, TVs, and Routers.
  • Stable Power Supply: Includes a 12V 3A power adapter for reliable operation during large data transfers.
  • Compact Design: Portable form factor for convenience and easy transport.

3. Setup

Package Contents:

  • Coolpie CR311 SSD Cloner
  • USB-C to USB-C Cable
  • USB-C to USB-A Cable
  • 12V 3A Power Adapter

Device Layout:

Detailed diagram of the Coolpie CR311 device with all ports and buttons labeled.
Detailed diagram of the Coolpie CR311 with labeled ports and buttons.
  • USB-C Interface: For connecting to a computer.
  • DC IN Power: For connecting the 12V 3A power adapter.
  • Power Button: To turn the device on/off.
  • mSATA 1 Source Slot: For mSATA source drives.
  • Source Status Light: Indicates activity of the source drive.
  • M.2 SATA 1/NVMe 1 Source Slot: For M.2 SATA or NVMe source drives.
  • SATA 1 Source Interface: For 2.5"/3.5" SATA source drives.
  • mSATA 2 Target Slot: For mSATA target drives.
  • Target Status Light: Indicates activity of the target drive.
  • M.2 SATA 2/NVMe 2 Target Slot: For M.2 SATA or NVMe target drives.
  • Progress Lights (25%, 50%, 75%, 100%): Indicate cloning progress.
  • Clone Button: Initiates the offline cloning process.

Supported Drive Types and Sizes:

Compatibility diagram for mSATA, M.2 NVMe/SATA SSD sizes, 2.5 inch HDD/SSD, 3.5 inch HDD, and M.2 key types.
Supported drive types, sizes, and M.2 key types.
  • mSATA SSDs
  • M.2 NVMe & SATA SSDs: Supports sizes 2230, 2240, 2260, 2280, 22110.
  • 2.5" HDD/SSD
  • 3.5" HDD
  • M.2 Key Types: Compatible with M Key, B Key, and B+M Key M.2 SSDs.

4. Operating Instructions

General Usage Notes:

  • Always ensure to insert only up to two hard drives at a time.
  • For both cloning and read/write operations, the inserted drives must be of the same protocol (e.g., NVMe with NVMe, SATA with SATA). M.2 SATA, mSATA, and standard SATA drives are all considered part of the SATA protocol.

4.1. How to Read & Write Data

Steps for Read & Write operation: Insert disks, connect power and to computer, check on computer.
Steps for connecting the device for read and write operations.
  1. Insert one or two compatible disks into the appropriate slots (Source or Target).
  2. Connect the 12V 3A power adapter to the 'DC IN' port and turn on the power switch.
  3. Connect the Coolpie CR311 to your computer using the provided USB-C cable.
  4. The inserted drives should now be recognized by your computer, allowing you to read and write data.

4.2. How to Clone (Offline Clone)

The offline cloning feature allows you to duplicate a drive without connecting the device to a computer.

Offline clone process showing Source to Target data flow and clone button. Text: Target disk capacity must be greater than or equal to source disk.
Offline clone process with capacity requirement.
Steps for offline cloning: Insert disks, connect power, press clone button.
Detailed steps for performing an offline clone.
  1. Ensure the Coolpie CR311 is NOT connected to any computer.
  2. Insert the source disk into a 'Source' slot and the target disk into a 'Target' slot. Ensure both disks are of the same protocol (e.g., NVMe to NVMe, SATA to SATA).
  3. Important: The target disk's capacity must be greater than or equal to the source disk's capacity.
  4. Connect the 12V 3A power adapter to the 'DC IN' port and turn on the power switch.
  5. Long press the 'Clone' button for approximately 5 seconds until the progress lights begin to illuminate.
  6. Monitor the progress lights (25%, 50%, 75%, 100%) to track the cloning process. Once 100% is reached, the cloning is complete.

4.3. Flexible Clone Methods (Protocol Compatibility)

The CR311 supports cloning between drives of the same protocol. Below are the supported modes:

  • Mode 1: M.2 NVMe to M.2 NVMe
    Diagram showing M.2 NVMe to M.2 NVMe cloning.
    Cloning between two M.2 NVMe SSDs.
  • Mode 2: mSATA to M.2 SATA, mSATA to mSATA, mSATA to SATA
    Diagram showing mSATA cloning to M.2 SATA, mSATA, or SATA drives.
    Cloning from mSATA to various SATA protocol drives.
  • Mode 3: SATA to M.2 SATA, SATA to mSATA, SATA to SATA
    Diagram showing SATA cloning to M.2 SATA, mSATA, or SATA drives.
    Cloning from a SATA drive to various SATA protocol drives.
  • Mode 4: M.2 SATA to M.2 SATA, M.2 SATA to mSATA, M.2 SATA to SATA
    Diagram showing M.2 SATA cloning to M.2 SATA, mSATA, or SATA drives.
    Cloning from an M.2 SATA drive to various SATA protocol drives.

5. Specifications

FeatureSpecification
ModelCR311
InterfacesUSB-C (USB 3.2 Gen2*2), DC IN
Supported ProtocolsM.2 NVMe, M.2 SATA, mSATA, SATA
Supported Drive TypesM.2 SSD (NVMe/SATA), mSATA SSD, 2.5" HDD/SSD, 3.5" HDD
Supported M.2 Sizes2230, 2240, 2260, 2280, 22110
Max Capacity22TB
Transfer SpeedUp to 20Gbps (USB 3.2 Gen2*2)
Power Supply12V 3A
Dimensions (L x W x H)Approx. 9cm (3.54in) x 7.5cm (2.95in) x 1.2cm (0.47in)
System CompatibilityWindows, macOS, Linux

6. Troubleshooting

Q: How to distinguish the source disk and the target disk?
A: The cloner has arrows for guidance. The slots on the left side are designated for source disks, and the slots on the right side are for target disks.
Q: Can the device function as a reader in addition to a cloner?
A: Yes, the Coolpie CR311 supports read-write operations. When used as a reader, you can insert up to two hard drives at a time, provided they are of the same protocol (e.g., both M.2 NVMe or both SATA protocol drives).
Q: Can hard drives with different protocols be mixed for cloning?
A: No, cloning is only supported between drives of the same protocol. An M.2 NVMe hard drive can only be cloned to another M.2 NVMe hard drive. Similarly, SATA protocol drives (M.2 SATA, mSATA, and standard SATA) can only be cloned to other SATA protocol drives.
Q: The progress indicator blinks simultaneously but the cloning process does not start or complete. Why?
A: This usually indicates that the capacity of the source disk is greater than that of the target disk. For successful cloning, the target disk must have a capacity equal to or larger than the source disk. Try swapping the disks if the target is larger, or use a new target disk with significantly more capacity.
Q: Why can't I clone successfully?
A: Several factors can prevent successful cloning:
  • The hard disk(s) may have a problem or be damaged.
  • The cloner is connected to other devices (e.g., a computer). For offline cloning, ensure it is disconnected from all other devices except the power adapter.
  • The two disks are not of the same protocol.
  • The source disk's capacity is larger than the target disk's capacity. Even if labeled the same, actual usable capacities can slightly differ.

7. User Tips

  • Always ensure the target disk capacity is greater than or equal to the source disk capacity for successful cloning.
  • For offline cloning, ensure the device is not connected to any computer. This is crucial for the standalone cloning function to operate correctly.
  • Remember that M.2 SATA, mSATA, and standard SATA drives all fall under the 'SATA protocol' for compatibility when cloning or reading/writing.
  • When inserting M.2 SSDs, ensure they are fully seated in their respective slots to establish a proper connection.

8. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller/manufacturer directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.