Aigo G01 Air Conduction Headphone User Manual

Introduction

The Aigo G01 Air Conduction Headphone is designed for users seeking a comfortable and safe audio experience, particularly during sports and outdoor activities. Its non-in-ear design promotes ear health and allows awareness of ambient sounds, enhancing safety. Featuring a lightweight and flexible design, Bluetooth 5.3 connectivity, and IP56 waterproof rating, the G01 is built for durability and performance.

Image: Aigo G01 Air Conduction Headphone highlighting its non-in-ear design for ear protection, comfort, and health.

Package Contents

Please check the package for the following items:

• Aigo G01 Air Conduction Headphone
• User Manual
• Charging Cable (Type-C)

Setup Guide

1. Charging the Headphone

1. Locate the Type-C charging port on the headphone.
2. Connect the provided Type-C charging cable to the headphone and a suitable USB power source (e.g., computer USB port, wall adapter).
3. The indicator light will show charging status. A full charge typically takes about 2 hours.
4. Once fully charged, the headphone provides approximately 8 hours of music playback.

Image: Headphone illustrating 8 hours of music time and low power consumption.

2. Powering On/Off

• Power On: Press and hold the multifunction button for a few seconds until the indicator light illuminates and you hear a power-on prompt.
• Power Off: Press and hold the multifunction button for a few seconds until the indicator light turns off and you hear a power-off prompt.

3. Bluetooth Pairing

1. Ensure the headphone is powered off.
2. Press and hold the multifunction button until the indicator light flashes rapidly (usually blue and red), indicating it's in pairing mode.
3. On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
4. Select "Aigo G01" from the list of found devices.
5. Once connected, the indicator light will typically stop flashing and remain solid blue, and you will hear a connection confirmation.

Image: Visual representation of Bluetooth 5.3 technology for stable connection.

4. Wearing the Headphone

The Aigo G01 features a hanging ear design and a skin-friendly memory collar for a secure and comfortable fit. Adjust the collar to fit snugly around your head. The flexible design allows for easy bending and adaptation to different head shapes, ensuring it stays in place during activities without causing discomfort.

Image: Diagram illustrating the hanging ear design and flexible memory collar for a secure and comfortable fit.

Operating Instructions

The Aigo G01 features a multifunction button for easy control of calls and music playback.

Image: Detailed diagram of the multifunction button and its various controls for calls, music, and voice assistant.

Call Mode

• Answer/Hang Up: Click the multifunction button.
• Reject Incoming Calls: Long press the multifunction button for 2 seconds.

Music Mode

• Play/Pause: Click the multifunction button.
• Next Track: Double-click the multifunction button.
• Previous Track: Triple-click the multifunction button.

Voice Assistant

• Activate Voice Assistant: Long press the multifunction button for 3 seconds.
• Exit Voice Assistant: Click the multifunction button again.

Volume Control

The headphone supports volume control. Specific buttons for volume adjustment are typically located on the side of the headphone unit.

Maintenance

• Cleaning: Wipe the headphones with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used. Avoid using harsh chemicals or abrasive materials.
• Water Resistance: The Aigo G01 is rated IP56 waterproof, meaning it is protected against dust and high-pressure water jets. It is suitable for use during exercise and in light rain, but should not be submerged in water.
• Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not in use for extended periods.

Troubleshooting

• Headphone won't turn on: Ensure the battery is charged. Connect to the charging cable and try again after a few minutes.
• Cannot pair with device:
  1. Ensure the headphone is in pairing mode (indicator light flashing rapidly).
  2. Make sure Bluetooth is enabled on your device.
  3. Move the headphone closer to your device.
  4. Turn off and on Bluetooth on your device, then try searching again.
  5. If previously paired, try "forgetting" the device on your phone's Bluetooth settings and re-pairing.
• No sound or low volume:
  1. Check the volume levels on both the headphone and your connected device.
  2. Ensure the headphone is properly connected via Bluetooth.
  3. Try playing different audio sources.
• Intermittent connection:
  1. Ensure there are no obstructions between the headphone and your device.
  2. Move away from other wireless devices that might cause interference.
  3. Ensure your device is within the <10m wireless range.

Specifications

Image: Diagram showing product components and a table of technical specifications.

User Tips

• Stay Aware: The non-in-ear design allows you to hear your surroundings, which is crucial for safety during outdoor activities like running, cycling, or hiking.
• Secure Fit: Take advantage of the flexible memory collar to ensure a snug and stable fit, especially during vigorous exercise.
• Battery Management: For optimal battery longevity, try to avoid letting the headphones completely drain before recharging.
• Versatile Use: These headphones are suitable for a variety of activities including online learning, running, indoor sports, leisure walks, outdoor cycling, and hiking.

Image: Examples of activities where the Aigo G01 headphones excel, such as sports and online learning.

Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's specific warranty policy or contact the Aigo customer support directly. Keep your purchase receipt as proof of purchase.