ATK X1 V2 Ultimate Wireless Gaming Mouse User Manual

1. Introduction

Thank you for choosing the ATK X1 V2 Ultimate Wireless Gaming Mouse. This high-performance gaming mouse is engineered for competitive play, featuring an ultra-lightweight design, an advanced PAW3950Ultra sensor, and an 8K Hz polling rate for unparalleled responsiveness. This manual provides essential information for setting up, operating, and maintaining your mouse to ensure optimal performance and longevity.

2. Safety Information

Please read the following safety guidelines before using your ATK X1 V2 Ultimate Wireless Gaming Mouse:

• Keep the device away from water, moisture, and extreme temperatures.
• Do not attempt to disassemble or modify the mouse. This may void the warranty and cause damage.
• Use only the provided charging cable to charge the mouse.
• Avoid dropping or subjecting the mouse to strong impacts.
• Keep out of reach of children.

3. Setup Guide

3.1 Package Contents

Ensure all items are present in your package:

• ATK X1 V2 Ultimate Wireless Gaming Mouse
• New GEM 8K Receiver
• USB Charging/Data Cable
• User Manual (this document)

3.2 Connecting the Mouse

1. Locate the New GEM 8K Receiver.
2. Plug the receiver into an available USB port on your computer.
3. Turn on the mouse using the power switch located on the underside of the mouse.
4. Your computer should automatically detect and install the necessary drivers.

3.3 Charging the Mouse

To charge your ATK X1 V2 Ultimate mouse:

• Connect the provided USB charging cable to the mouse and to a USB power source (e.g., computer USB port, USB wall adapter).
• The mouse features a high-density battery offering over 800 hours of battery life at 1000Hz polling rate.
• Please use the original data cable to charge the mouse.

3.4 Software Installation (ATK HUB 3.0)

For advanced customization and optimal performance, download and install the ATK HUB 3.0 software from the official ATK website.

• The software allows you to customize DPI settings, button assignments, macros, and other performance parameters.

3.5 System Requirements for 8KHz Polling Rate

To ensure optimal 8KHz usage experience with your ATK mouse, please confirm your computer meets the minimum recommended specifications:

• CPU: Intel Core i7-9700K or above, AMD Ryzen 7 3700X or above
• Monitor: Refresh rate above 240Hz
• Graphics: NVIDIA GTX1080 or above, AMD RX5700 or above
• Memory: 16GB or more

4. Operating Instructions

4.1 Basic Operation

• Power On/Off: Use the switch on the bottom of the mouse to turn it on or off.
• Buttons: The mouse features 4 programmable buttons, including the left click, right click, scroll wheel click, and a side button.
• DPI Adjustment: The mouse supports a DPI adjustment range of 100-30000 DPI, overclockable up to 42000 DPI. Use the dedicated DPI button (if present) or the ATK HUB 3.0 software to cycle through DPI settings.
• Polling Rate: The mouse operates at an 8K Hz polling rate, ensuring ultra-low latency and precise tracking.

4.2 Advanced Customization with ATK HUB 3.0

The ATK HUB 3.0 software provides extensive options for personalizing your mouse:

• Button Remapping: Assign custom functions or macros to any of the mouse buttons.
• DPI Settings: Create multiple DPI profiles and switch between them on the fly.
• Polling Rate: Adjust the polling rate if needed (though 8K Hz is recommended for competitive play).
• LOD (Lift-Off Distance) Adjustment: Fine-tune the distance at which the sensor stops tracking when lifted.
• Macro Editor: Record and assign complex sequences of commands.

5. Maintenance

5.1 Cleaning

The ATK X1 V2 Ultimate features a brand new nano coating, making it sweat-resistant, stain-resistant, and easy to clean.

• Wipe the mouse surface gently with a soft, dry, lint-free cloth.
• For stubborn dirt, slightly dampen the cloth with water. Avoid harsh chemicals or abrasive materials.
• Clean the sensor area periodically with a cotton swab to ensure accurate tracking.

5.2 Battery Care

• Always use the original USB charging cable to prevent damage to the battery.
• Avoid completely draining the battery frequently to prolong its lifespan.
• If storing the mouse for an extended period, charge it to about 50% before storage.

6. Troubleshooting

• Mouse not responding:
  • Ensure the mouse is powered on.
  • Check if the 8K receiver is securely plugged into a USB port.
  • Try plugging the receiver into a different USB port.
  • Ensure the mouse is charged.
  • Re-pair the mouse with the receiver if necessary (refer to ATK HUB 3.0 software for pairing instructions).
• Intermittent connection:
  • Move the mouse closer to the receiver.
  • Ensure there are no strong wireless interference sources nearby (e.g., Wi-Fi routers, other wireless devices).
  • Ensure your system meets the recommended specifications for 8KHz polling rate.
• Tracking issues:
  • Clean the mouse sensor.
  • Ensure you are using a suitable mouse pad.
  • Adjust DPI settings in ATK HUB 3.0.

7. Specifications

The ATK X1 V2 series offers several variants with slight differences in specifications:

8. User Tips

• Mousepad Inclusion: Some product variants or bundles may include a mousepad. Please check your specific order details or product SKU to confirm if a mousepad is part of your purchase.
• Optimal Performance: For the best gaming experience, especially when utilizing the 8K Hz polling rate, ensure your computer meets or exceeds the recommended system specifications listed in Section 3.5.
• Software Customization: Take advantage of the ATK HUB 3.0 software to fine-tune your mouse settings. Customizing DPI, button functions, and macros can significantly enhance your gaming performance and workflow.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official ATK website or contact your retailer. Keep your proof of purchase for warranty claims.