1. Introduction
The NOYAFA NF-722 IPC CCTV Tester is a versatile 7-inch mini monitor designed for comprehensive testing and maintenance of various camera systems and network infrastructure. It supports IP, AHD, TVI, CVI, and SDI cameras, offering 4K/8K HDMI and VGA capabilities, PoE monitoring, and advanced cable testing functions. This manual provides detailed instructions for setting up, operating, and maintaining your device.
2. Package Contents
Please check the package contents carefully upon unboxing:
- NF-722 IPC Camera Tester Unit
- User Manual
- Power Adaptor
- Remote Control
- Tool Bag
- Qualification Certification
- Power Output Cable
- Alligator Clip Adapter Cable
3. Device Overview
Familiarize yourself with the ports, buttons, and display of your NF-722 IPC CCTV Tester.
3.1 Front View
3.2 Top and Bottom Ports
3.3 Remote Control
- FAR+, NEAR-: PTZ Focusing - Operation
- TELE+, WIDE-: PTZ Zoom - Operation
- APER+, APER-: PTZ Aperture - Operation
- Arrow Buttons: Select cursor or menu left/right/down/up shift operation
- ENTER: Confirm Button
- CLOSE: Exit Button
- Power Button: Power On/Off
4. Setup
4.1 Initial Charging
Before first use, fully charge the device using the provided Power Adaptor. Connect the adaptor to the DC 12V IN port. The red light indicates power, and the green light indicates charging. A full charge provides 8-10 hours of continuous working time.
4.2 Power On/Off
Press and hold the red Power Button on the device or remote control to power on or off the IPC Tester.
5. Operating Instructions
The NF-722 features a 7-inch 1920x1200 IPS HD full view touch screen for intuitive navigation.
5.1 CVBS Analog Video Input Test
Connect your CVBS analog camera to the CVBS/Coax Terminal. Select the 'CVBS & HD' application on the main interface, then choose 'CVBS' to view the video feed. The device supports PAL/NTSC format adaptation.
5.2 HD Camera Test (AHD/TVI/CVI/SDI)
The tester supports HD TVI 8MP, CVI 8MP, and AHD SMP cameras. Connect your HD coaxial camera to the CVBS/Coax Terminal. Select the 'CVBS & HD' application and choose the appropriate HD format (AHD, TVI, CVI, SDI) to view the video. Maximum support is 8MP with a resolution of 3840x2156 at 15fps.
5.3 IP Camera Test (IP Detection/One-Click Video)
Connect the network cable from your IP camera to the LAN interface of the instrument. Turn on the power. The tester can scan and identify virtual cameras, play image videos, and diagnose video recorder functions and circuit problems. It supports 4K H.265 IP camera testing with real-time video display, snapshot, recording, and playback.
The device is compatible with ONVIF standard protocol and supports DAHUA, HIKVISION, ACTI, SAMSUNG, and over 30 other manufacturer private protocols. It also supports camera mobile client installation.
5.4 HDMI Video Input Test
The HDMI IN port supports HDMI high-definition signal input up to 1080p 60fps. This allows you to directly debug DVR/NVR and other hard disk video recorders or use the tester as a replacement monitor.
5.5 Network Cable Test (TDR)
The device has a built-in network cable testing tool. Connect the network cable to the TDR Test Terminal. It displays a cable sequence diagram, showing continuity and connection status. The TDR breakpoint function visually indicates the crystal head at which end of the wire is faulty, and can display cable length, attenuation, quality, reflectivity, and impedance parameters.
5.6 Network Tools
The IPC Tester includes various network tools to make your work more efficient:
- IP Address Scan Function: Discover devices on the network.
- PING Tool: Test network connectivity and response time.
- NET-port Blink Function: Locate network ports by blinking the connected device's LED.
- Link Test: Check network link status.
- DHCP: Dynamic Host Configuration Protocol client.
- Bandwidth Test: Measure network throughput.
- DNS: Domain Name System tools.
- Traceroute: Trace the path of data packets.
- Socket: Socket testing.
- CIDR: CIDR calculator.
- Cable: Cable wiring diagrams (T568A, T568B, Straight, Cross Line).
5.7 PTZ Control
The device supports PTZ control for over 30 protocols, including Pelco-D/P, Samsung, and Panasonic. Use the on-screen controls or the remote control to manipulate camera pan, tilt, zoom, and aperture functions.
5.8 Audio Test
One channel audio signal input is available for testing. Audio can be recorded and saved directly on the device.
5.9 Power Output Functions
- DC12V Power Output: Max current 3A, provides temporary power for cameras.
- DC24V Power Output: Max current 1A, provides temporary power for cameras.
- PoE Power Output: 48V standard PoE output, provides PoE power for cameras.
- DC5V Power Output: Provides temporary power for USB-powered cameras or emergency power for mobile phones, max current 2A.
5.10 PSE Voltage Test
Display PoE power supply device voltage and circuit condition to ensure proper power delivery.
5.11 RS485 Serial Port Tool
Can send or receive any data or hex data for advanced device configuration and testing.
5.12 Other Functions (Demonstration Video)
The IPC Tester also includes features for file management, office applications, and various system settings. Refer to the demonstration video for a visual guide on these functions:
6. Maintenance
6.1 Cleaning
Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents that may damage the screen or casing.
6.2 Storage
Store the device in a cool, dry place away from direct sunlight and extreme temperatures. The working temperature range is -10°C to +50°C, and working humidity is 30%-90%.
6.3 Battery Care
To prolong battery life, avoid fully discharging the device frequently. Recharge the 7000mAh lithium battery when the charge indicator is low. If storing for extended periods, charge the battery to approximately 50% every few months.
7. Troubleshooting
- Device not turning on: Ensure the battery is charged. Connect the power adapter and try again. If the issue persists, contact customer support.
- No video signal input: Double-check all cable connections (BNC for CVBS/HD, HDMI for HDMI input, Ethernet for IP). Ensure the camera is powered on and functioning correctly. Verify the correct input mode is selected on the tester.
- Network cable test shows faulty: Inspect the RJ45 connectors for proper crimping. Check the cable for physical damage or sharp bends. The TDR function can help pinpoint the exact location of the fault.
8. Specifications
| Feature | Description |
|---|---|
| Model Number | NF-IPC722ATCHS |
| Touch Screen | 7 inch G+G structure capacitance screen |
| LCD Screen | 7 inch resolution 1920x1200 IPS HD full view |
| Ethernet Port | 10/100/1000M adaptive |
| WIFI | Built-in wireless WIFI, speed 150M |
| IP Camera Test | 4K H.265 IP camera test, video image real-time display without delay, support video snapshot, recording and playback |
| ONVIF | ONVIF tool, support DAHUA, HIKVISION, ACTI, SAMSUNG and other more than 30 manufacturer private protocols and customized, support camera mobile client installation |
| PTZ Control | Support Pelco-D/P, Samsung, Panasonic, etc. more than 30 protocols |
| CVBS Analog Camera Test | 1 channel CVBS analog signal input, support PAL/NTSC format adaptation |
| HD Camera Test | Support HD TVI 8MP, CVI 8MP, AHD SMP. |
| Video Image Zoom | Real-time enlarge moving HD video image, max enlarge 8 times |
| Cable Test | Built-in cable testing tool, check cable sequence and breakpoint, etc. |
| Audio Test | One channel audio signal input for testing, can be recorded and saved |
| Optical Power Meter | Test optical fiber parameters |
| DC12V Power Output | DC12V power output, max current 3A, provide temporary power for cameras |
| DC24V Power Output | DC24V power output, max current 1A, provide temporary power for cameras |
| PoE Power Output | 48V standard PoE output, provide PoE power for cameras |
| DC5V Power Output | Provide temporary power for USB-powered cameras or emergency power for mobile phones, max current 2A |
| PSE Voltage Test | Display PoE power supply device voltage and circuit condition |
| HDMI Video Input Test | Input HD video image into instrument to test video recorder |
| RS485 Serial Port tool | Can send or receive any data or hex data |
| Power Charger | DC 12V/2A |
| Battery | Built-in 7.4V polymer lithium battery, capacity 7000mAh, can work continually for 8-10 hours |
| Language | Chinese Simplified, Chinese Traditional, English, Germany, Spanish, Portuguese, Russian, French, Polish, Korean, Japanese, Turkish and Italian 13 languages |
| Internal SD Storage | 8G |
| Working Temperature | -10°C - +50°C |
| Working Humidity | 30% - 90% |
| External Size | 23cm x 14cm x 4.5cm |
| Weight | 0.9KG |
9. User Tips
- Battery Longevity: To maximize the lifespan of your device's battery, avoid leaving it fully discharged for extended periods. Regular partial charges are better than deep discharges.
- Accessory Availability: If you need to replace specific accessories like the cable tracker, please contact the seller or manufacturer directly to inquire about purchasing individual components.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided with your purchase or visit the official NOYAFA website. Keep your purchase receipt as proof of purchase.
