A-BF KPS3005D

Contents

A-BF KPS3005D DC Regulated Power Supply

User Manual

1. Introduction

This manual provides detailed instructions for the safe and efficient operation of your A-BF KPS3005D 30V 5A switching DC regulated power supply. This device features a precise four-digit current/voltage digital display and is designed for various applications requiring a stable and adjustable DC power source. Please read this manual thoroughly before use and keep it for future reference.

2. Safety Information

  • Always connect the power supply to a grounded outlet.
  • Do not operate the device in wet or damp conditions.
  • Ensure proper ventilation around the unit to prevent overheating.
  • Do not open the casing; there are no user-serviceable parts inside. Refer servicing to qualified personnel.
  • Avoid short-circuiting the output terminals.
  • Disconnect power before making any connections or disconnections to the output.
  • Use only the specified input voltage (AC 220V ±10% 50Hz, or 100V input with manual switching).

3. Package Contents

Please check the package contents upon receipt. If any items are missing or damaged, contact your vendor immediately.

  • Power Supply Host (KPS3005D)
  • Instruction Manual
  • Certificate
  • Warranty Card
  • Power Cord (appropriate plug type for your region)
  • Test Line (Output cables)
Power Cord Product Accessories Description
Figure 3.1: Examples of power cord plug types (British, US, European) included with the product.

4. Product Overview

4.1 Front Panel

KPS3005D Labeled Front and Rear Panel Diagram
Figure 4.1: Front and Rear Panel Layout with Key Functions.
  • Voltage Display: Four-digit display for output voltage.
  • Current Display: Four-digit display for output current.
  • Adjust/LOCK Knob: Used for setting voltage/current values and locking the settings.
  • A/V Button: Toggles between voltage and current adjustment modes.
  • Enter Button: Confirms selection or enters a setting mode.
  • Left/Right Keys: Navigates between digits for precise adjustment.
  • ON/OFF Button: Controls the output power.
  • Save Button: Stores current settings into one of the four memory groups (A, B, C, D).
  • Output Terminals: Positive (+) (red) and Negative (-) (black) terminals for connecting the load.
  • Power Switch: Main power switch for the unit.
  • Indicators: CC (Constant Current), CV (Constant Voltage), ON (Output On), OTP (Over Temperature Protection).

4.2 Rear Panel

  • Cooling Fan: Automatically adjusts speed based on internal temperature.
  • Communication Interface (+): For optional RS232/485 communication.
  • Socket with Fuse: AC power input socket with integrated fuse protection.

5. Specifications

KPS3005D Front View with Dimensions and Specifications
Figure 5.1: KPS3005D Dimensions and Key Specifications.
Parameter Value
Model KPS3005D
Output Voltage 0-30V
Output Current 0-5A
Output Power 150W
Power Effect (Voltage) ≤ 0.1% + 3mV
Power Effect (Current) ≤ 0.03% + 3mA
Load Effect (Voltage) ≤ 0.03% + 0.05V
Load Effect (Current) ≤ 0.05% + 0.003A
Ripple Noise (Voltage) ≤ 0.05Vrms
Ripple Noise (Current) ≤ 0.01Arms
Power Input AC 220V ±10% 50Hz (100V input 220V manual switching)
Dimensions (L×W×H) 280mm × 88mm × 180mm (excluding protruding parts)
Weight Approx. 2kg - 2.5kg

6. Setup

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Inspect for any signs of damage.
  2. Placement: Place the unit on a stable, level surface with adequate space for ventilation, especially around the rear cooling fan. Avoid placing it near heat sources or in direct sunlight.
  3. Power Connection: Connect the provided power cord to the AC input socket on the rear panel of the power supply and then to a suitable grounded AC outlet. Ensure the input voltage matches the power supply's requirements (AC 220V ±10% 50Hz, or 100V input with manual switching if applicable).
  4. Load Connection: Before connecting any load, ensure the power supply's output is OFF. Connect your device to the red (+) and black (-) output terminals using appropriate test leads. Ensure correct polarity.

7. Operating Instructions

7.1 Basic Operation

  1. Ensure the power supply is properly set up as described in Section 6.
  2. Flip the main power switch on the front panel to the 'ON' position. The display will light up.
  3. The unit will typically power on with the output OFF.

7.2 Setting Voltage and Current

The KPS3005D uses an encoder tuner for easy and fast regulation:

  1. Press the A/V button to select whether you want to adjust Voltage (V) or Current (A). The corresponding display will show a flashing digit.
  2. Use the Left/Right Arrow Keys to move the flashing cursor to the digit you wish to change.
  3. Rotate the Adjust/LOCK Knob clockwise to increase the value or counter-clockwise to decrease it.
  4. Once the desired voltage or current is set, press the Enter button to confirm.
  5. To lock the settings and prevent accidental changes, press and hold the Adjust/LOCK Knob for a few seconds until 'LOCK' appears on the display (if supported by the model). Repeat to unlock.

7.3 Output Control

  • After setting the desired voltage and current, press the ON/OFF button to enable the output. The 'ON' indicator will light up.
  • To disable the output, press the ON/OFF button again. The 'ON' indicator will turn off.

7.4 Data Storage and Recall

The KPS3005D supports storing and recalling up to four sets of voltage and current parameters:

  1. Set the desired voltage and current as described in Section 7.2.
  2. Press the Save button. The display will show 'A', 'B', 'C', or 'D' flashing, indicating the memory group.
  3. Use the Left/Right Arrow Keys or rotate the Adjust/LOCK Knob to select the desired memory group (A, B, C, or D).
  4. Press Enter to save the current settings to the selected memory group.
  5. To recall a stored setting, press the Save button, select the desired memory group, and press Enter. The power supply will load the stored voltage and current values.
Data storage call function
Figure 7.1: Data storage and recall function allows saving multiple parameter sets.

8. Maintenance

  • Cleaning: Disconnect the power supply from the AC outlet before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
  • Ventilation: Regularly check that the cooling fan and vents are free from dust and obstructions to ensure optimal performance and longevity.
  • Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.

9. Troubleshooting

Problem Possible Cause Solution
No power/display off Power cord not connected, power switch off, blown fuse. Check power cord, ensure switch is ON. Check and replace fuse if necessary (refer to qualified personnel).
No output voltage/current Output OFF, incorrect settings, short circuit in load. Press ON/OFF button to enable output. Verify voltage/current settings. Disconnect load and check for short circuits.
OTP indicator on Over-temperature protection activated due to overheating. Turn off the unit, allow it to cool down. Ensure proper ventilation and clear any obstructions from the fan/vents.
Unstable output Loose connections, faulty load, internal issue. Check all connections. Test with a different load. If problem persists, contact support.

10. User Tips

  • Pre-set before connecting: Always set your desired voltage and current limits before connecting your sensitive load and enabling the output. This prevents accidental overvoltage or overcurrent.
  • Start with low current: When testing a new circuit, it's often a good practice to start with a very low current limit and gradually increase it as needed, while monitoring your circuit.
  • Monitor CC/CV indicators: Pay attention to the CC (Constant Current) and CV (Constant Voltage) indicators. CV means the output voltage is stable at your set value, while CC means the output current has reached its set limit.
  • Use memory functions: Utilize the A, B, C, D memory groups to quickly switch between frequently used voltage and current settings for different projects.

11. Warranty and Support

Your A-BF KPS3005D power supply comes with a standard warranty as indicated on the included Warranty Card. Please retain your proof of purchase for any warranty claims. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact the official A-BF support channel or your authorized dealer.

© 2023 A-BF. All rights reserved.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.