1. Introduction
Thank you for choosing the SHARDOR MF0802 4-in-1 Electric Milk Frother. This appliance is designed to effortlessly create rich, creamy milk foam for your favorite coffee beverages like cappuccinos, lattes, and macchiatos, as well as warm milk and hot chocolate. Please read this manual carefully before use to ensure safe and optimal performance.

The SHARDOR MF0802 Electric Milk Frother, ready to create delicious beverages.
2. Important Safety Instructions
- Read all instructions before using the appliance.
- Do not immerse the base unit in water or other liquids. Only the pitcher is washable.
- Ensure the voltage rating on the appliance matches your local power supply.
- Keep the appliance out of reach of children.
- Do not operate the appliance with a damaged cord or plug.
- Always unplug the frother when not in use and before cleaning.
- Do not touch hot surfaces. Use handles or knobs.
- Use only attachments recommended by the manufacturer.
- Do not use outdoors.
- Do not place on or near a hot gas or electric burner, or in a heated oven.
- Avoid contact with moving parts.
3. Product Overview and Components
The SHARDOR MF0802 Electric Milk Frother consists of the following main components:
- Frother Pitcher: The main container for milk. Features a non-stick coating.
- Lid: Transparent lid to cover the pitcher during operation.
- Base Unit: Contains the heating element and controls.
- Frothing Whisk: Used for creating thick or thin foam.
- Heating Whisk (or Hot Chocolate Accessory): Used for heating milk or mixing hot chocolate.
- Control Panel: Features power button, mode selection, and temperature settings.

The frother includes two interchangeable whisks for different functions.

Internal view of the frother pitcher with liquid level indicators.
4. Setup and First Use
- Unpack: Carefully remove all packaging materials and check for any damage.
- Clean: Before first use, clean the frother pitcher and whisks according to the 'Maintenance and Cleaning' section. Wipe the base unit with a damp cloth.
- Placement: Place the frother on a flat, stable, heat-resistant surface.
- Whisk Installation: Select the appropriate whisk for your desired function and firmly place it onto the shaft at the bottom of the pitcher.
- Power Connection: Plug the power cord into a suitable electrical outlet.
5. Operating Instructions
The SHARDOR MF0802 offers 4-in-1 functionality and adjustable temperature settings for various milk preparations.
5.1. 4-in-1 Multifunctionality
This frother can prepare:
- Warm Thick Foam: Ideal for cappuccinos.
- Warm Thin Foam: Perfect for lattes and flat whites.
- Warm Milk / Hot Chocolate: For heating milk or mixing hot chocolate.
- Cold Thick Foam: Great for iced coffees and cold beverages.

Choose from four distinct functions to create your preferred milk texture and temperature.
5.2. Temperature Settings
You can select from four temperature options for warm preparations:
- 55°C (131°F)
- 60°C (140°F)
- 65°C (149°F)
- 70°C (158°F)

The digital display shows the selected temperature setting.
5.3. Step-by-Step Operation
- Add Milk: Pour milk into the pitcher. Observe the MAX/MIN markings inside the pitcher. For frothing, the maximum capacity is 140ml. For heating milk or hot chocolate, the maximum capacity is 270ml. Do not exceed the MAX line to prevent overflow.
- Select Whisk: Ensure the correct whisk is installed for your desired function (frothing whisk for foam, heating whisk for warm milk/hot chocolate).
- Close Lid: Place the lid securely on the pitcher.
- Place on Base: Position the pitcher onto the power base.
- Power On: Press the power button to turn on the frother.
- Select Function: Use the mode selection buttons on the control panel to choose your desired function (e.g., warm thick foam, cold thick foam).
- Adjust Temperature (for warm functions): If a warm function is selected, use the temperature button to cycle through 55°C, 60°C, 65°C, or 70°C.
- Start: The frother will start automatically after selection. The process typically takes 60-90 seconds.
- Automatic Shut-off: The milk heater will automatically switch off when your milk or froth is ready, preventing burning or over-frothing.
- Serve: Carefully remove the pitcher from the base and pour your frothed milk or warm beverage.

Enjoy rich and dense milk foam for your beverages.

The frother is also suitable for preparing hot chocolate.
5.4. Product Demonstration Video
Watch this video for a visual guide on how to use the SHARDOR Electric Milk Frother.
6. Maintenance and Cleaning
Proper cleaning ensures the longevity and hygiene of your milk frother.
- Unplug: Always unplug the appliance from the power outlet before cleaning.
- Cool Down: Allow the frother to cool down completely after use.
- Remove Whisk: Carefully remove the whisk from the pitcher.
- Clean Pitcher: The inside of the pitcher has a non-stick coating, making it easy to clean. Rinse the pitcher and whisks with water immediately after use. For stubborn residue, use a soft sponge and mild detergent.
- Wipe Exterior: Wipe the exterior of the pitcher and the base unit with a damp cloth. Do not immerse the base unit in water.
- Dry: Ensure all parts are thoroughly dry before reassembling or storing.

Follow these steps for proper cleaning. Do not submerge the base unit in water.
7. Troubleshooting
If you encounter issues with your milk frother, please refer to the following common problems and solutions:
- Frother does not turn on:
- Ensure the power cord is securely plugged into a working outlet.
- Check if the pitcher is correctly placed on the base unit.
- Milk is not frothing or foam is thin:
- Ensure you are using cold, fresh milk. Whole milk generally produces the best foam.
- Check that the frothing whisk is correctly installed.
- Do not exceed the maximum milk level for frothing (140ml).
- Milk is not heating:
- Ensure a warm function and temperature are selected.
- Check that the heating whisk is correctly installed.
- Do not exceed the maximum milk level for heating (270ml).
- Appliance stops unexpectedly:
- The frother has an automatic shut-off feature once the cycle is complete or if it overheats. Allow it to cool down before next use.
8. Specifications
| Item | Value |
|---|---|
| Material | ABS/304 Stainless steel |
| Features | Electric Multifunction Milk Frother |
| Product Size | 157.6 x 108 x 210.5 mm |
| Place of Origin | Mainland China |
| Model Number | MF0802 |
| Power (W) | 500W |
| Voltage (V) | 110-120V or 220-240V~50/60Hz (depending on region) |
| Net weight | 0.8kg |
| Max Frothing Capacity | 140ml |
| Max Heating Capacity | 270ml |
| Function | One-touch operation, Multifunction coffee milk foam frother |
| Application | Household, RV, Travel, Camping |
| Power Type | Rechargeable/Electric Both Work |
| Certification | CE / EU, LFGB |
9. User Tips
- For best frothing results, always use cold, fresh milk. Whole milk typically yields the richest foam.
- Experiment with different types of milk (dairy and non-dairy) to find your preferred texture and taste. Results may vary with non-dairy alternatives.
- Clean the frother immediately after each use to prevent milk residue from drying and becoming difficult to remove.
- Ensure the whisk is securely attached before adding milk and starting the frother.
- Do not overfill the pitcher beyond the indicated MAX lines to avoid spills.
10. Warranty and Support
The SHARDOR MF0802 Electric Milk Frother comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal household use. It does not cover damage resulting from misuse, accident, alteration, neglect, or commercial use.
For warranty claims or technical support, please contact the seller or manufacturer with your purchase details and model number.





