Introduction
The ATK Dragonfly A9 Series is a range of ultra-lightweight wireless e-sports gaming mice designed for high performance and ergonomic comfort. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ATK Dragonfly A9 Series mouse.
Image: ATK Dragonfly A9 Series mice in black, pink, and white, highlighting lightweight design.
Product Specifications
The ATK Dragonfly A9 Series offers various models with distinct features. Refer to the table below for detailed specifications.
Image: Detailed product parameters for all A9 Series models.
| Feature | A9 SE | A9 | A9 Plus | A9 Pro | A9 Ultra |
|---|---|---|---|---|---|
| Name | ATK Dragonfly A9 Series Lightweight Wireless Mouse | ||||
| Size | 125x64x40mm (medium to large size) | ||||
| Coating | None | Ultra-fine icy coating (non-slip, easy to clean) | |||
| Sensor | PAW3311 | PAW3395SE | PAW3395 | PAW3950Ultra | |
| Solution | HiSilicon NearLink controller | PixArt flagship controller | Nordic52840 | ||
| Transmission Technology | Second SmartSpeed Wireless with ATK professional competitive firmware | ||||
| Polling Rate | Wired 1K / Wireless 1K | Wired 1K / Wireless 8K | Wired 8K / Wireless 8K | ||
| Battery | 500mAh | 800mAh | 500mAh | 800mAh | |
| Battery Life | 120 hours (NearLink connection) | 240 hours (NearLink connection) | 150 hours (1000Hz) | ||
| Weight | 53±3g | 53±3g | 57±3g | 57±3g | 53±3g |
| Roller | FSWITCH E10 Flagship | TTC Golden Wheel | |||
| Footpad | Standard full-size foot pads | Standard competitive foot pads + competitive foot pads | Standard competitive foot pads + balanced foot pads | ||
| Connection Method | NearLink/Bluetooth/Wired | 2.4G/Bluetooth/Wired | |||
| Receiver | Standard NearLink 1K receiver | Standard PixArt 1K receiver | Standard Nordic 1K receiver, Nordic 8K receiver | ||
Additional Sensor Specifications (PAW3950Ultra - A9 Ultra only):
- DPI Adjustment Range: 10-30000 (Overclockable to 42000)
- Tracking Rate: 750 IPS
- Acceleration: 50G
- LOD Height: 0.7mm~1.7mm (Precision 0.1mm, 11 steps adjustable)
Image: Detailed sensor specifications for PAW3950Ultra.
Setup
Package Contents
The contents of your mouse package may vary slightly depending on the specific model (A9 SE, A9, A9 Plus, A9 Pro, A9 Ultra). Please refer to the table below for details:
Image: Packaging accessories for each A9 Series model.
| Model | Accessories |
|---|---|
| A9 SE / A9 | NearLink 1K receiver, Data cable, Full-size foot pad, User guide, Warranty certificate |
| A9 Plus | NearLink 1K receiver, Data cable, Anti-skid sticker (x1), Full-size foot pad, User guide, Warranty certificate |
| A9 Pro | PixArt 1K receiver, Data cable, Grey competitive foot pad (x1), Anti-skid sticker (x1), User guide, Warranty certificate |
| A9 Ultra | Nordic 1K receiver, Nordic 8K receiver, 8K oversized data cable, Grey competitive foot pad (x1), Red balanced foot pad (x1), Anti-skid sticker (x1), User guide, Warranty certificate |
Connecting Your Mouse
Your ATK Dragonfly A9 Series mouse supports multiple connection modes:
Image: Three-mode connection options: 2.4G, Bluetooth, and Wired.
- 2.4G Wireless Connection: Insert the provided 2.4G receiver (dongle) into an available USB port on your computer. The mouse should automatically connect.
- Bluetooth Connection: Turn on Bluetooth on your computer and put the mouse into Bluetooth pairing mode (refer to the specific model's user guide for exact instructions). Select the mouse from your computer's Bluetooth device list to pair.
- Wired Connection: Connect the mouse to your computer using the provided data cable. This will also charge the mouse.
Driver Installation
For optimal performance and customization, it is recommended to download and install the ATK HUB software. Visit WWW.ATKGEAR.COM for product driver downloads and other services.
Image: ATK HUB software for mouse customization.
8K Polling Rate Requirements (A9 Plus, A9 Pro, A9 Ultra)
To fully experience the 8KHz polling rate, ensure your computer meets the following minimum recommended configuration requirements:
- CPU: Intel Core i7 9700K or above, AMD Ryzen 7 3700X or above
- Display: Refresh rate 240Hz or above
- Graphics card: NVIDIA GTX 1080 or above, AMD RX 5700 or above
- Memory: 16GB or above
Note: An 8K receiver must be purchased separately for models that support 8K polling rate but do not include it as standard (e.g., A9 Plus, A9 Pro). The A9 Ultra includes both 1K and 8K receivers.
Image: Comparison of 1000Hz and 8000Hz polling rates with system requirements.
Operating Your Mouse
Ergonomics and Grip Styles
The ATK Dragonfly A9 Series features a symmetrical design suitable for various grips and medium to large hand sizes, ensuring a natural and comfortable experience.
Image: Ergonomic design supporting Crouching, Finger, and Grasping grip styles.
Buttons and DPI Adjustment
The mouse features 5 programmable buttons. DPI settings can be adjusted through the ATK HUB software or via dedicated buttons on the mouse (refer to your model's specific guide). The A9 Ultra model offers a DPI adjustment range from 10 to 30000, overclockable to 42000.
Switch Types
The A9 series mice are equipped with high-performance switches for responsive clicks:
- Omron Optical Microswitch: Provides a hard, crisp, and fast response.
- Huano Ice Berry Powder Dot: Offers a soft, elastic feel with high-frequency clicks.
Image: Details of Omron optical microswitch and Huano ice berry powder dot switches.
Maintenance
Cleaning
For models A9 Plus, A9 Pro, and A9 Ultra, the ultra-fine icy coating is designed to be non-slip, anti-fouling, and easy to clean. Use a soft, dry cloth to wipe the mouse surface. Avoid harsh chemicals or abrasive materials.
Battery Charging
The ATK Dragonfly A9 Series mice are rechargeable. Connect the mouse to your computer using the provided USB data cable to charge the internal battery. The battery capacity varies by model (500mAh or 800mAh).
Image: Illustration of the mouse's long battery life with an 800mAh battery.
Storage
The mouse features a 2.4G storage compartment, typically located on the underside, to securely store the wireless receiver when not in use or during transport.
Image: Exploded view showing the 2.4G storage compartment.
Troubleshooting
Connectivity Issues
- 2.4G Wireless: Ensure the 2.4G receiver (dongle) is securely plugged into a USB port. Check if the mouse is switched to 2.4G mode.
- Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is in pairing mode. Try re-pairing the device.
- Wired: Ensure the USB cable is properly connected to both the mouse and the computer.
DPI or Performance Issues
- Ensure the ATK HUB software is installed and updated.
- For 8KHz polling rate, confirm your system meets the recommended specifications (CPU, display refresh rate, graphics card, memory).
- Check if the correct receiver (1K or 8K) is being used for the desired polling rate.
Physical Variations
Please note that the A9 series may have two styles of scroll wheels and side buttons. These variations are shipped randomly but are all official genuine products.
Image: Variations in scroll wheel and side button styles.
User Tips
- Weight Preference: If mouse weight is a critical factor for you, pay close attention to the specific model's weight. For example, the A9 Pro MAX is noted to be heavier than the A9 Pro.
- 8K Polling Rate: To fully utilize the 8KHz polling rate, ensure your computer hardware meets the specified requirements for CPU, display refresh rate, graphics card, and memory. An 8K receiver is also necessary and may need to be purchased separately for some models.
- Switch Consistency: While the product uses high-quality switches, be aware that specific switch types (e.g., Omron vs. Huano) might be a factor in your preference.
Warranty and Support
Your ATK Dragonfly A9 Series mouse comes with a warranty certificate included in the packaging. For warranty claims, technical support, driver downloads, and other services, please visit the official ATK GEAR website:
