Tianxun TX-960 Professional Underground Metal Detector User Manual

1. Introduction

The Tianxun TX-960 is a professional-grade, high-sensitivity, waterproof underground metal detector designed for finding coins, relics, jewelry, gold, and silver. It features an LCD display for target identification, three-tone audio discrimination, and a pinpoint function for accurate target location. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

2. Key Features

• LCD Display: Shows probable metal type, target depth, DISC range, sensitivity level, operating mode, and battery indication.
• Three Tone Audio Discrimination: Sounds distinctive tones for different metal types.
• DISC Function: Ignores unwanted metals and finds valuable items by setting a discrimination range.
• Pinpoint (P/P) Function: Accurately locates detected targets.
• Headphone Jack (3.5mm): Allows connection of headphones (not supplied) for private operation.
• Waterproof Search Coil: Enables detection in shallow water environments like rivers, beaches, and shorelines.
• Adjustable Stem: Easily adjust the detector's length for comfortable use.
• Human Mechanics Handle: Ergonomically designed for easy, anti-slip holding.
• Padded Arm Cuff: Provides comfort during extended use.
• ARC Stand: Prevents damage when placing the detector on the ground.

3. Product Components

The TX-960 Metal Detector typically includes the following main components:

• Control Box with LCD Display
• Adjustable Stem (Upper, Middle, Lower sections)
• Search Coil (12″x12.8″ DD, waterproof)
• Armrest with Padded Arm Cuff
• Handle Grip
• Search Coil Cable
• Threaded Bolt and Washer (for coil attachment)
• Spring Clips (for cable management)
• Battery Compartment (for 1x 9V alkaline battery)

4. Assembly Instructions

Follow these steps to assemble your Tianxun TX-960 Metal Detector:

1. Assemble the Stem: Connect the upper, middle, and lower stem sections. Ensure the spring clip is properly positioned for cable management along the stem.
2. Attach the Search Coil: Secure the search coil to the lower stem using the provided threaded bolt and washer. Hand-tighten until snug, but do not overtighten.
3. Connect the Search Coil Cable: Plug the search coil cable into the connector on the control box. Twist the connector to secure it firmly. Wrap the cable neatly around the stem and secure it with the spring clips to prevent tangling and false signals during operation.
4. Install Battery: Open the battery compartment on the control box and insert one 9V alkaline battery (not included), ensuring correct polarity. Close the compartment securely.
5. Adjust Armrest and Stem Length: Adjust the armrest and stem length for comfortable operation. The search coil should be parallel to the ground when held, allowing for a natural sweeping motion.

5. Operating Instructions

To begin using your metal detector, follow these general operating guidelines:

1. Power On: Press the Power button (often integrated with the DISC button) to turn on the detector. The LCD display will illuminate.
2. Select Operating Mode: The TX-960 offers various modes. Use the DISC button to cycle through or adjust discrimination settings. This allows you to ignore unwanted metals (like iron) and focus on valuable targets.
3. Adjust Sensitivity (SENS): Use the SENS buttons (up/down arrows) to adjust the detector's sensitivity. Higher sensitivity increases detection depth but can also increase false signals in highly mineralized ground. Start with a moderate setting and adjust as needed.
4. Sweeping the Search Coil: Hold the detector with the search coil parallel to the ground, about 1-2 inches (2.5-5 cm) above the surface. Sweep the coil slowly from side to side in overlapping passes. Maintain a consistent height and speed for best results.
5. Target Indication:
   • Audio: Listen for distinctive tones. The three-tone audio discrimination will help you differentiate between various metal types.
   • Visual: Observe the LCD display for probable metal type (e.g., Iron, Foil, Alum, Zinc, Dime, Qtr, 50¢) and depth indication. The sensitivity bar will also show signal strength.
6. Pinpoint (P/P): Once a target is detected, press the P/P (Pinpoint) button. Move the coil slowly over the target area in a cross-pattern until the strongest signal is heard/seen, indicating the precise center of the target.

6. Maintenance

Proper maintenance will extend the life and performance of your metal detector:

• Cleaning: After each use, especially if used in wet or dirty conditions, wipe down the search coil and stem with a damp cloth. Ensure the control box remains dry.
• Storage: Store the detector in a cool, dry place. Avoid exposing the control box to extreme temperatures or direct sunlight for prolonged periods.
• Battery Care: Always remove the 9V alkaline battery if the detector will not be used for an extended period to prevent battery leakage, which can damage the electronics.
• Cable Management: Periodically check the search coil cable for any signs of wear or damage. Ensure it remains securely wrapped around the stem to prevent interference.

7. Troubleshooting

Here are some common issues and their potential solutions:

• No Power:
  • Check if the 9V alkaline battery is correctly installed with the right polarity.
  • Replace with a fresh 9V alkaline battery.
• False Signals/Chatter:
  • Reduce the sensitivity setting.
  • Ensure the search coil cable is tightly wrapped around the stem and secured with clips to prevent movement.
  • Avoid highly mineralized ground or areas with excessive metallic debris, which can cause interference.
• Shallow Detection Depth:
  • Increase the sensitivity setting (if ground conditions allow without excessive false signals).
  • Ensure the search coil is swept parallel to the ground at a consistent height.
  • Check the battery level; a low battery can affect performance.
• Difficulty Identifying Metals:
  • Practice with known metal objects (coins, rings) in a clear area to understand the detector's audio and visual responses for different metals.
  • Adjust the DISC (discrimination) settings to filter out unwanted metals.

8. Specifications

9. User Tips

Maximize your treasure hunting experience with these helpful tips:

• Practice Makes Perfect: Before heading to a new site, familiarize yourself with the detector's tones and display responses by testing it with various metal objects (coins, jewelry) in a controlled environment. This will help you quickly identify targets in the field.
• Adjust for Environment: Always adjust sensitivity and discrimination settings based on the ground conditions and the type of targets you are looking for. Highly mineralized soil may require lower sensitivity to avoid false signals.
• Water Use: While the search coil is waterproof, always ensure the control box remains dry. Avoid submerging the control box to prevent damage.

10. Warranty and Support

Your Tianxun TX-960 Metal Detector comes with a 1-year warranty from the date of purchase.

For any questions, technical assistance, or warranty claims, please contact our customer service:

• WhatsApp: +86 13191616332
• Email: kaigui8884@163.com