1. Introduction
This manual provides detailed instructions for the safe and effective use of the Mestek EMF Meter Geiger Detector Electromagnetic Radiation Tester, Model EMF01. This device is designed to detect and measure electromagnetic field (EMF) radiation, including electric field radiation, magnetic field radiation, and ambient temperature. It features a highly sensitive three-direction induction probe for comprehensive measurements.
The EMF01 is suitable for use in various environments such as homes, offices, industrial settings, power distribution rooms, high-speed railways, and near signal base stations.
2. Package Contents
Please check the package contents upon receipt to ensure all items are present:
- 1 x Mestek EMF Meter (EMF01)
- 1 x Packing Box
- 1 x User Manual
- 1 x Screwdriver
- 1 x Velvet Bag

3. Device Overview
Familiarize yourself with the components and controls of the EMF Meter:

- Electromagnetic Induction Probe: Detects electric and magnetic fields along X, Y, Z axes.
- Screen: Digital and analog color display for readings and status.
- HOLD Button: Freezes the current reading on the display.
- SEL Button: Used for function conversion (e.g., unit switching).
- Power Button (Center): Turns the device on/off.
- AVG/MAX Button: Toggles between average and maximum value display, and locks conversion.
- Buzzer Button: Toggles the audible alarm on/off.

4. Setup
4.1 Battery Installation
The Mestek EMF Meter requires 3 AAA batteries (not included). To install the batteries:
- Locate the battery compartment on the back of the device.
- Use the provided screwdriver to open the battery compartment cover.
- Insert 3 AAA batteries, ensuring correct polarity (+/-).
- Replace the battery compartment cover and secure it with the screw.

5. Operating Instructions
5.1 Power On/Off
Press the central Power button to turn the device on. Press and hold the Power button to turn it off. The device features an automatic power-off function after approximately 10 minutes of inactivity to conserve battery life.
5.2 Basic Measurement
Upon powering on, the device will display real-time electromagnetic radiation levels. The display shows both digital and analog readings, along with temperature.

5.3 Unit Switching
Press the "SEL" button to cycle through different measurement units for magnetic field (uT, mG) and electric field (V/m). You can also switch between Celsius (°C) and Fahrenheit (°F) for temperature readings.

5.4 Data Hold (HOLD)
Press the "HOLD" button to freeze the current readings on the display. Press it again to release the hold and resume real-time measurements.
5.5 Average/Maximum Value (AVG/MAX)
Press the "AVG/MAX" button to switch between displaying the average radiation value and the maximum radiation value detected during the measurement session.
5.6 Buzzer On/Off
Press the Buzzer button to toggle the audible alarm on or off. The alarm will sound when radiation levels exceed predefined safety thresholds.
5.7 Interpreting Readings
The device provides a visual indicator (green, yellow, red zones) on the display to categorize radiation levels:
| Unit | Green (Safe) | Yellow (Warning) | Red (Harmful) |
|---|---|---|---|
| uT | 0.00 ~ 0.39 | 0.40 ~ 0.79 | 0.80 ~ 74.00 |
| mG | 0 ~ 3.9 | 4.0 ~ 7.9 | 8.0 ~ 740.0 |
| V/m | 0 ~ 39 | 40 ~ 79 | 80 ~ 9999 |

When the analog bar reaches the yellow area, the instrument alarms, and the screen simultaneously displays "ALARM" and "Harmful" prompts, indicating that radiation exceeds the standard. Take steps to move away from the radiation source.
5.8 Demonstration Video
6. Maintenance
- Keep the device clean and dry. Use a soft, damp cloth to wipe the exterior. Do not use abrasive cleaners or solvents.
- Store the device in the provided velvet bag when not in use to protect it from dust and scratches.
- If the device will not be used for an extended period, remove the batteries to prevent leakage.
- Avoid exposing the device to extreme temperatures, high humidity, or direct sunlight.
- The device features a shockproof rubber shell for durability, but avoid dropping it from significant heights.

7. Troubleshooting
- Device does not power on:
- Check if batteries are installed correctly with proper polarity.
- Replace with new AAA batteries.
- Inaccurate readings:
- Ensure the device is not near strong magnetic or electric fields that could interfere with readings (e.g., large motors, power lines).
- Verify the correct measurement unit is selected.
- Display is dim or blank:
- Check battery level. Replace batteries if low.
- Ensure the device is not exposed to extreme temperatures.
- Buzzer not sounding:
- Check if the buzzer function is enabled (refer to section 5.6).
- Ensure radiation levels are above the alarm threshold.
8. Specifications
| Parameter | Value |
|---|---|
| Working height | 2000m |
| Measurement mode | Electromagnetic induction |
| Display | VA reverse display color screen |
| Maximum display | 9999 |
| Sampling rate | About 0.4 second |
| Measuring range | V/m: 0~9999; uT: 0~74; mG: 0~740 |
| Resolution | V/m: 1; uT: 0.01; mG: 0.1 |
| Bandwidth | 5-3500MHz |
| Automatic shutdown | About 10 minutes |
| Operating current | About 20mA |
| Power supply | 1.5V × 3 AAA |
| Measuring temperature range | -10 ~ 60°C |
| Working temperature and humidity | 0 ~ 60°C / 0 ~ 85%RH |
| Storage temperature and humidity | -10 ~ 60°C / 0 ~ 80%RH |
| Size | 170 × 73 × 33mm |
| Weight | About 160g without battery |


9. User Tips
Based on general usage and product information, here are some tips for optimal use:
- For accurate readings, ensure the device is held steadily and away from your body or other potential interference sources.
- When measuring, move the device slowly around the area of interest to detect variations in field strength.
- Pay attention to the color-coded indicator (green, yellow, red) on the display for quick assessment of radiation levels.
- The three-direction probe allows for comprehensive measurement, so orient the device to capture fields from different angles if needed.
- Remember that radiation levels can fluctuate, so multiple readings over time may provide a more complete picture.
Note: No specific user tips were available from provided reviews or Q&A data. These tips are general recommendations for using such a device.
10. Warranty and Support
The Mestek EMF Meter is designed for reliability and durability. For information regarding warranty coverage, technical support, or service, please refer to the official product documentation or contact the seller directly. Keep your purchase receipt as proof of purchase.
The device is certified with CE, EAC, FCC, GMP, RoHS, UL, ensuring compliance with relevant safety and quality standards.