TELESIN P1-MP-10

Contents

TELESIN Fun Shot Magnetic Grip User Manual

Thank you for purchasing the TELESIN Fun Shot Magnetic Grip. Please read this manual carefully before use.

1. Product Introduction

The TELESIN Fun Shot Magnetic Grip is designed to enhance your smartphone photography experience, offering stable grip, remote control, and optional fill lighting.

Product demonstration video showing various uses and features.

1.1 Key Features

  • 8x Strong Magnetic Force: Secures phones (190-250g) with 2-3KG magnetic attraction.
  • Ergonomic Design: WaveFit9™ Finger Spacing & PalmR45™ Curvature for fatigue-free grip (ISO 9241-400 Certified).
  • Dual-Sided Magnetic Fill Light (Optional): 3 color temperatures (White 7500K, Natural 5600K, Warm 2500K) for selfies, still life, or mirror use.
  • One-Handed Control: Two-stage shutter, zoom lever, mode switch, and quick camera access.
  • Quick Wake Function: Compatible with iPhone, Huawei, Xiaomi, and more (excludes Samsung and HarmonyOS 5.0+).
  • Long Battery Life: Low-power CR1632 button cell battery with 130mAh capacity, lasting over 10 months with typical use.
  • Portable & Lightweight: 109g weight, 45mm curvature for palm comfort.
  • 360° Shooting Freedom: Detachable remote, horizontal/vertical switch, and MagSafe compatibility.

1.2 Product Components

Product List: Camera Grip, Magnetic Ring, Cleaning Kit, Phone Lanyard, Battery Removal Tool, Instruction Manual

Image showing the contents of the product package.

  • 1 × Camera Grip
  • 1 × Magnetic Ring
  • 1 × Cleaning Kit
  • 1 × Phone Lanyard
  • 1 × Battery Removal Tool
  • 1 × Instruction Manual

2. Setup Instructions

2.1 Initial Setup

  1. Remove Battery Tab: For first-time use, please remove the plastic battery tab from the remote control.
  2. Attach to Phone: Attach the product to the back of your phone.
Diagram showing how to remove the battery tab and attach the grip to a phone.

Visual guide for initial setup steps.

2.2 Bluetooth Connection

  1. Power On & Pair: Press and hold the shutter button for 2 seconds to power on the device. The indicator light will flash, entering Bluetooth pairing mode. On your phone, search for and connect to "TELESIN_MG" in your Bluetooth settings. The device will automatically shut off if not connected within 2 minutes.

2.3 iPhone Specific Settings for Zoom

For iPhone users, Bluetooth enables the shutter function only by default. To use other functions like zoom, you need to enable the Zoom feature in your iPhone settings:

  1. Go to Settings > Accessibility > Zoom.
  2. Enable Zoom and set Zoom Region to Full Screen Zoom.
  3. To restore the view, double-tap with three fingers on the screen.
iPhone settings for enabling Zoom accessibility feature.

Image illustrating iPhone accessibility settings for Zoom.

2.4 Magnetic Ring Mounting (for non-MagSafe phones or cases)

If your phone is not an iPhone 12-16 series or you use a non-magnetic phone case, you can use the included magnetic ring:

  1. Choose a smooth and flat phone case.
  2. Attach the metal ring to the back of the phone case.
  3. Press gently to ensure adhesion.
  4. Wait for 12 hours before using to ensure strong adhesion.

Important:

  • Do not attach the metal ring directly to the back of a bare phone.
  • Do not reapply the magnetic plate, as this may reduce adhesiveness.
  • Oily materials in phone cases (e.g., liquid silicone, patterned cases) can affect adhesion.

3. Operating Instructions

3.1 Power On/Off

  • Power On: Press and hold the remote control's shutter button for 2 seconds. The indicator light will flash, and the device will enter Bluetooth pairing mode.
  • Power Off: In on or sleep mode, press and hold the shutter button for 2 seconds. The indicator light will flash quickly three times and then turn off, indicating the remote control is off.

3.2 Quick Wake-up & Sleep Mode

The device features quick wake-up and automatic sleep functions to conserve power.

Screen Status Black Screen (All States) Screen On (Unlocked Status)
iOS Long Press Mode Button 1 Click Mode Button 2
Some Android Systems Long Press Mode Button 1 Long Press Mode Button 1
vivo Long Press Mode Button 1 (first light up screen), then Long Press Mode Button 1 again Long Press Mode Button 1

Note: Quick wake-up function is currently not supported on Samsung and HarmonyOS 5.0.

Entering Sleep Mode

  • The device will automatically enter sleep mode after 5 minutes of inactivity post-pairing.
  • If disconnected via phone settings, distance, or Bluetooth off, the device will enter sleep mode and auto-off after 30 minutes.

Waking from Sleep Mode

  • Press any button to wake up the device.
  • If the last paired phone's Bluetooth is on, it will auto-reconnect.
  • If the phone's Bluetooth is off and no pairing occurs within 2 minutes, the device will enter sleep mode and shut down after 30 minutes.

3.3 Control Functions

Diagram of the grip's buttons and their functions: Two-Stage Shutter, Zoom Lever, Mode Switch, Cameras Switch, Quick camera.

Image detailing the control functions of the grip.

  • Shutter Button:
    • Long Press (2 seconds): Turn the device on/off.
    • Single Press: Start taking photos/recording videos.
    • Half Press Double Tap: Switch between front and rear cameras.
    • Half Press: Focus.
  • Zoom Lever: Slide the lever to zoom in and out during photo and video shooting.
  • Mode Button:
    • Switch between shooting modes.
    • In landscape mode, after half-pressing to focus, the mode button can adjust the exposure.

3.4 Using the Magnetic Fill Light (Optional)

The optional magnetic fill light can be attached to the grip for enhanced lighting.

Image showing the dual-sided magnetic expandable fill light with white, natural, and warm light options.

The dual-sided magnetic fill light offers White (7500K), Natural (5600K), and Warm (2500K) color temperatures.

Image showing multi-form multi-use of the fill light: still life, selfie beauty lighting, cosmetic mirror, cell phone holder.

The fill light can be used in various ways, including as a cosmetic mirror or phone stand.

4. Maintenance

4.1 Low Battery Reminder

When the battery is low (below 20%), all indicator lights will turn red. Please replace the battery promptly.

4.2 Battery Replacement

To replace the CR1632 button cell battery:

  1. Remove the remote control from the grip.
  2. Use the provided battery removal tool to disassemble the battery compartment cover by turning it clockwise to loosen it.
  3. Replace the old battery with a new CR1632 button cell battery, ensuring correct polarity (+ and -).
  4. Securely close the battery compartment.

Warning:

  • This product contains a button battery. Keep new and used batteries out of reach of children and pets.
  • If the battery compartment does not close securely, stop using the product, remove the batteries, and keep them away from children.
  • Do not force discharge, recharge, disassemble, heat above 60°C, or incinerate the battery.
  • Do not mix old and new batteries, or different brands/types of batteries.
  • If the device has not been used for a long time, remove the battery and dispose of it immediately.

4.3 General Care

  • In complex or crowded environments, use the product with a magnetic phone case and a phone lanyard for added security.
  • Do not use the product in high-impact or other sports scenarios.
  • The grip features a silicone magnetic surface to prevent scratches on your phone.

5. Troubleshooting

  • Device not powering on or connecting via Bluetooth: Ensure the battery tab has been removed and the battery is correctly installed. Try replacing the battery. Make sure the device is within 10m of your phone.
  • Bluetooth connection drops frequently: Ensure your phone's Bluetooth is stable and there are no other interfering devices.
  • Quick Wake-up function not working: This feature is not supported on Samsung and HarmonyOS 5.0 or above devices. For iPhones, ensure the Zoom accessibility feature is correctly configured as per section 2.3.
  • Magnetic grip not holding securely: Ensure your phone or case is MagSafe compatible. If using the adhesive magnetic ring, ensure it was applied to a clean, smooth surface and allowed to cure for 12 hours. Avoid re-applying the magnetic ring.
  • Buttons not responding: Check Bluetooth connection. For iPhones, ensure Zoom accessibility is enabled for full functionality beyond just the shutter.
  • Fill light not working: Check the fill light's battery level and ensure it is properly attached to the magnetic grip.

6. Specifications

Feature Detail
Product Model P1-MP-10
Material ABS + PC + Aluminum Alloy
Product Dimensions 124.7mm × 79.6mm × 37.7mm
Product Weight 109g
Battery Model (Grip) CR1632 Button Battery
Battery Capacity (Grip) 130mAh
Battery Nominal Voltage (Grip) 3.0V
Bluetooth Compatible Devices Apple, Android, HarmonyOS devices
Magnetic Compatibility iPhone 12 to 16 series. Other models require a magnetic phone case or adhesive magnetic plate.
Remote Control Range Up to 10 meters

6.1 Magnetic Fill Light Specifications (Optional)

Feature Detail
Product Dimensions 23.6 × 22.1 × 7.5 inches
Product Weight 80g
CRI ≥95
Color Temperature Triple 2500K ~ 7500K
Charging Parameters 500mAh 5V/1A Type-C
Runtime (Max Brightness) ≥45 minutes
Runtime (Min Brightness) ≥500 minutes

7. User Tips

  • The buttons on the grip are designed for a high-quality feel and minimal lag, ensuring a responsive shooting experience.
  • The magnets on both the grip and the optional LED fill light are very strong. Exercise caution when detaching them from your phone to avoid accidental drops or damage.
  • For optimal magnetic adhesion, especially with non-MagSafe phones, ensure you use a compatible magnetic case or properly apply the included magnetic ring to a smooth phone case and allow it to set for 12 hours.
  • This grip is perfect for vloggers, travelers, and selfie enthusiasts looking for stable, well-lit, and hands-free smartphone photography.

8. Warranty and Support

The TELESIN Fun Shot Magnetic Grip comes with a 6-month warranty service starting from the date you receive the product.

For further support, product information, or to download the full PDF user manual, please visit the official TELESIN website: www.telesin.com

You can also view the original PDF user manual here.

© TELESIN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.