K16 K16-NB300

Contents

K16 NB300 Engine 4 Stroke 300cc Water Cooled Off-Road Motorcycle User Manual

Model: K16-NB300

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and care of your K16 NB300 4-stroke 300cc water-cooled off-road motorcycle. Please read this manual thoroughly before operating the motorcycle to ensure proper understanding of its features and safety guidelines. Keep this manual for future reference.

Side view of the K16 NB300 motorcycle in black and grey, parked on a blue stand outdoors.
Figure 1: K16 NB300 Off-Road Motorcycle

Setup and Pre-Operation Checks

Before your first ride and before each subsequent ride, perform the following checks to ensure the motorcycle is in safe operating condition.

  1. Fuel Level: Ensure the fuel tank has sufficient fuel. The fuel tank capacity is 7.8 liters.
  2. Engine Oil: Check the engine oil level. Refer to the engine manufacturer's guidelines for proper oil type and level.
  3. Tire Pressure: Verify tire pressures are correct for your riding conditions. The tire sizes are F 80/100-21 and R 110/100-18.
  4. Brakes: Test both front and rear hydraulic disc brakes for proper function and responsiveness. Ensure brake fluid levels are adequate.
  5. Chain Tension: Inspect the drive chain for proper tension and lubrication.
  6. Controls: Check the throttle, clutch, and shifter for smooth operation. Ensure the rubber grips are secure.
  7. Suspension: Verify the front (CNC up and down resistance adjustable) and rear (Single-cylinder Hydraulic Central Air Suspension) shock absorbers are functioning correctly and adjusted for your weight and riding style.
  8. Fasteners: Visually inspect all critical nuts, bolts, and fasteners for tightness.
Close-up image detailing the front and rear hydraulic disc brakes and tire sizes (F: 80/100-21, R: 110/100-18).
Figure 2: Front and Rear Hydraulic Disc Brakes and Tire Specifications

Operating Instructions

Starting the Engine

  1. Ensure the motorcycle is in neutral.
  2. Turn the ignition key to the 'ON' position.
  3. Engage the choke if the engine is cold.
  4. Press the electric start button.
  5. Once the engine starts, allow it to warm up for a few moments before riding. Disengage the choke as the engine warms.

Riding the Motorcycle

The K16 NB300 features a manual wet multi-plate clutch and chain drive transmission. Familiarize yourself with the clutch engagement point and gear shifting patterns before riding in challenging terrain.

  • Throttle Control: Smooth and progressive throttle application is key for off-road riding.
  • Braking: Utilize both front and rear hydraulic disc brakes for effective stopping power. Practice balanced braking to maintain control.
  • Gear Shifting: Shift gears smoothly to match engine RPM to terrain and speed.
  • Body Position: Adjust your body position to maintain balance and control over varied terrain.
Front view of the K16 NB300 motorcycle, highlighting the LED headlight assembly.
Figure 3: K16 NB300 Front View with Headlight

Demonstration Video

Watch this video for a visual demonstration of the K16 NB300 motorcycle in action, showcasing its capabilities on a motocross track.

Video 1: K16 NB300 Motocross Action

Maintenance

Regular maintenance is crucial for the longevity and performance of your motorcycle. Perform the following tasks at recommended intervals.

  • Engine Oil Change: Change engine oil and filter according to the engine manufacturer's schedule.
  • Air Filter Cleaning: Clean or replace the air filter regularly, especially after riding in dusty conditions.
  • Chain Maintenance: Clean, lubricate, and adjust the drive chain frequently.
  • Brake Inspection: Check brake pads for wear and brake fluid levels. Inspect brake lines for damage.
  • Tire Inspection: Check tires for wear, damage, and proper inflation.
  • Coolant Level: As this is a water-cooled engine, regularly check the coolant level and replenish as needed.
  • Spark Plug: Inspect and replace the spark plug as part of routine maintenance.
  • Fastener Torque: Periodically check and re-torque critical fasteners.
Close-up image showing engine specifications (19KW/8500MIN, 24N.M/7500MIN, 10.5:1 compression) and the rear single-cylinder hydraulic central air suspension.
Figure 4: Engine and Rear Suspension Details

Troubleshooting

This section provides basic troubleshooting steps for common issues. For more complex problems, consult a qualified technician.

  • Engine Won't Start:
    • Check fuel level.
    • Ensure ignition is ON.
    • Verify battery charge.
    • Check spark plug for fouling.
  • Loss of Power:
    • Check air filter for blockage.
    • Inspect fuel delivery system.
    • Verify spark plug condition.
  • Brakes Not Responsive:
    • Check brake fluid level.
    • Inspect brake pads for wear.
    • Look for air in the brake lines (requires bleeding).
  • Unusual Noises:
    • Investigate the source of the noise immediately.
    • Check for loose components or worn parts.

Specifications

FeatureSpecification
Engine Type300CC Single-cylinder Four-stroke Water-cooled OHC
Engine Displacement279.6ML
Maximum Power19kw/8500r/min
Maximum Torque24Nm/7500r/min
Clutch TypeManual Wet Multi-Plate
Cylinder Diameter74mm
Piston Stroke65mm
Maximum Speed95KM/H
Compression Ratio10.5:1
Starting MethodElectric
Fuel Tank Capacity7.8L
Transmission ModeChain Drive
Front BrakeDisc brake
Rear BrakeDisc brake
Front Shock AbsorberCNC up and down resistance adjustable
Rear Shock AbsorberSingle-cylinder Hydraulic Central Air Suspension
Tire SizeF 80/100-21 R110/100-18
Wheelbase1460mm
Seat Height910mm
Minimum Ground Clearance300mm
Gross Weight140KG
Size (L*W*H)2190*840*1250mm

Warranty and Support

The K16 NB300 motorcycle is covered by a free returns policy within 90 days of purchase. For any product-related inquiries, technical support, or warranty claims, please contact the seller directly. Ensure you retain your purchase records for verification.

Your personal details and payment information are handled with security and privacy in mind. We do not share your personal details with any third parties without your consent and protect your privacy by keeping your personal details safe and secure.

User Tips

  • Safety Gear: Always wear appropriate safety gear, including a helmet, goggles, gloves, boots, and protective clothing, when operating the motorcycle.
  • Riding Environment: Only operate the motorcycle in designated off-road areas and be aware of your surroundings.
  • Regular Checks: Develop a habit of performing quick pre-ride checks to catch potential issues before they become problems.
  • Learn Your Bike: Spend time understanding how your motorcycle handles in different conditions and practice basic maneuvers in a safe environment.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.