IPROG PRO V87/V89 ECU Key Programmer Tool User Manual

1. Product Overview

The IPROG PRO V87/V89 is a versatile ECU key programmer tool designed for automotive diagnostics and programming. It supports a wide range of functions including IMMO (immobilizer) programming, SRS (airbag) reset, mileage correction, ECU programming, car radio unlocking, and EEPROM/MCU read/write operations. This tool is an essential asset for automotive technicians and enthusiasts.

2. Setup and Installation

2.1 System Requirements

The IPROG PRO software is designed to operate on Windows family operating systems. Supported versions include:

• Windows XP
• Windows Vista
• Windows 7
• Windows 8

Note: Windows 10 is NOT supported.

2.2 Language Support

The software supports English (not full English) and Russian languages.

2.3 Hardware Connection

1. Connect the IPROG PRO main unit to your computer using the provided USB cable.
2. Ensure all necessary drivers are installed. The software package typically includes these drivers.
3. Connect the appropriate adapter to the IPROG PRO unit and then to the vehicle's OBDII port or directly to the component (e.g., EEPROM, MCU) as required for the specific task.

3. Operating Instructions

The IPROG PRO offers a wide array of functions categorized for ease of use. Below are detailed instructions for common operations.

3.1 General Functions

• Odometer Correction: Work with odometers via OBDII connector or directly on the table using adapters.
• Multimedia Unlocking: Unlock car radio systems.
• Key Programming: Copy, prepare, and unlock keys and transponders.
• IMMO-Key Auto Dumps: Work with immobilizer key data dumps.
• Airbag Crash Data: Work with airbag computer modules to delete crash data.
• Unit Conversion: Transfer readings from miles to kilometers.
• Processor Read/Write: Read and write data from various automotive processors.
• DPF Removal: Remove particulate filter data from dumps.
• Intercom Keys: Work with keys for intercom systems.
• PIN Code Realignment: Realign PIN codes from dumps for certain brands.
• Software Updates: Control board number and scripts full base number with ability to update.

3.2 Specific Function Modules

3.2.1 Airbag Module

This module allows for the management of airbag system data.

• Read and erase crash data for supported vehicles.
• Read and erase Diagnostic Trouble Codes (DTCs).
• Repair Configuration (CFG) data.

3.2.2 Dashboard Module

For odometer reading and writing.

• Read current mileage (km).
• Write new mileage (km).

3.2.3 Car Radio & ECU Module

Functions for car radio systems and Engine Control Units.

• Car Radio: Read and erase information, reset count.
• ECU: IMMO OFF (immobilizer disable), DPF OFF (diesel particulate filter disable).

3.2.4 EEPROM Module

For reading, writing, and erasing EEPROM data.

• Read EEPROM data.
• Write data to EEPROM.
• Erase EEPROM data.

3.2.5 IMMO Module

Dedicated to immobilizer and key programming.

• Program and copy chips for cars and trucks.
• Unlock keys.
• Support for Toyota smart keys: reset key preparation.
• Write a key using immobilizer data dump.

3.2.6 MCU Module

For reading and writing data from Microcontroller Units (MCUs).

• Read and write data from various MCU chips.
• Support for chips from Atmel, Fujitsu, Microchip Motorola, and NEC v850.

4. Maintenance

To ensure the longevity and optimal performance of your IPROG PRO tool, follow these maintenance guidelines:

• Cleaning: Keep the device and adapters clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Storage: Store the tool and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures. Use the provided carrying bag for protection during storage and transport.
• Software Updates: Regularly check for and install software updates to ensure compatibility with new vehicle models and to access the latest features and bug fixes.
• Cable Care: Handle cables carefully to prevent damage. Avoid bending or twisting them excessively.

5. Troubleshooting

If you encounter issues with your IPROG PRO tool, consider the following:

• Software Compatibility: Ensure your operating system is compatible (Windows XP, Vista, 7, or 8). The tool does not support Windows 10.
• Connection Issues: Verify that all cables are securely connected to the device, adapters, and computer. Try a different USB port.
• Driver Installation: Confirm that all necessary drivers for the IPROG PRO are correctly installed on your computer.
• Power Supply: Ensure the device is receiving adequate power (12V, 24 watts).
• Software Errors: If the software displays an error, try restarting the application and the device. Consult the software's help documentation for specific error codes.
• Language Settings: If text appears incorrectly, check the software's language settings (English or Russian).

6. Specifications

7. Warranty and Support

For any technical assistance, software updates, or warranty inquiries, please contact the seller or manufacturer directly. Ensure you provide your product model and software version for efficient support.

8. User Tips

• Dedicated System: Consider setting up a dedicated computer with a compatible Windows OS (XP, Vista, 7, or 8) specifically for this tool to avoid conflicts with other software or operating system updates.
• Language Preference: Be aware that English support might not be fully comprehensive; some menus or prompts may appear in Russian. Familiarity with basic Russian terms or using translation tools might be helpful.
• Backup Data: Always back up original data from any vehicle module before performing read/write or modification operations.
• Stay Updated: Regularly check for software updates from the official source to ensure the broadest vehicle coverage and functionality.