1. Product Overview
The TELESIN Fun Shot Magnetic Grip is a versatile shooting aid and remote control handle designed to enhance your smartphone photography experience. It features an ergonomic design, a detachable remote control, and magnetic compatibility for various smartphones, including those with MagSafe technology.

Key Features:
- Ergonomic Design (WaveFit9 Tech™, PalmR45 Tech™)
- Two-Stage Shutter Button
- Zoom Lever
- Mode Switch Button
- Detachable Remote Control
- MagSafe Compatible (Horizontal and Vertical Shooting)
- Magnetic Fill Light Expansion (optional accessory)
- 10m Remote Control Range
- Scientific Finger Spacing (9mm for anti-slip stability)
- 45mm Soothing Curvature for comfortable grip
- Strong Magnetic Force (8x phone weight)
- Low Power Consumption for long battery life
2. Package Contents
Please check the box for the following items:

- 1 x Camera Grip
- 1 x Magnetic Ring
- 1 x Cleaning Kit
- 1 x Phone Lanyard
- 1 x Battery Removal Tool
- 1 x Instruction Manual
3. Setup Guide
3.1 Battery Installation
The TELESIN Fun Shot Magnetic Grip uses a CR1632 graphene button battery.
- For initial use, remove the controller from the grip and pull out the plastic tab at the bottom of the battery compartment to power on.
- To replace the battery, unscrew the compartment cover clockwise using the provided tool and replace with a new CR1632 graphene button battery (sold separately).

3.2 Attaching the Magnetic Grip to your Phone
For MagSafe Phone or MagSafe Case Users:
Simply align the magnetic grip with the MagSafe area on your iPhone 12 or newer model, or a MagSafe compatible case. The magnetic connection is stronger when used with a MagSafe case.
For Non-MagSafe Phone or Non-MagSafe Case Users:
Use the included magnetic ring. Please stick the magnetizing ring on the back of a smooth phone case and let it sit for 2 hours before using it. Ensure the magnetic ring does not block the phone's camera lens or flash.


3.3 Bluetooth Pairing
- For first-time use, press and hold the shutter button for 2 seconds to power on the remote control.
- On your smartphone, go to Bluetooth settings and connect to the device named "TELESIN_MG".

3.4 iPhone Zoom Accessibility (for iPhone users)
After the first Bluetooth connection, for optimal zoom control on iPhones:
- Go to your iPhone's Settings.
- Navigate to Accessibility.
- Select Zoom.
- Enable Zoom.
Note: When Zoom is on, tap three fingers twice to restore the view.
4. Operating Instructions
4.1 Remote Control Functions

- Power On/Off: Press and hold the shutter button for 2 seconds.
- Two-Stage Shutter:
- Half-press to focus (when camera app is open).
- Single press for photo/video capture.
- Double half-press to switch between front and rear cameras.
- Zoom Lever: Toggle the rocker left and right to adjust the camera zoom.
- Mode Button: Press left or right to switch between different camera modes (e.g., photo, video, portrait, etc., depending on your phone's camera app).
4.2 Quick Wake Function
The grip's remote control supports quick wake-up for certain phone models.

Supported Models:
iPhone / HUAWEI / HONOR / Xiaomi / OPPO / vivo / OnePlus / Redmi / iQOO
Unsupported Models:
Samsung / HarmonyOS NEXT 5.0 or above
Wake Methods:
- Wake from Locked Screen (Screen Off): Long press Mode 1 button for 2 seconds.
Exception: vivo/iQOO models require double press. - Wake from Unlocked Screen (Screen On but Locked): Long press Mode 1 button for 2 seconds.
Exception: iPhone requires single click on Mode 2 button.
4.3 Horizontal and Vertical Shooting
The magnetic attachment allows for easy switching between horizontal (landscape) and vertical (portrait) shooting orientations.

4.4 Magnetic Fill Light (Optional Accessory)
If you have the optional magnetic fill light, it can be attached to the back of the grip for enhanced lighting. It features a dual-sided design, adjustable color temperature, and can also function as a cosmetic mirror or phone stand.





5. Maintenance
- Use the provided cleaning kit to keep the grip and magnetic surfaces clean.
- The grip features a silicone magnetic surface to help prevent scratches on your phone.
- Replace the CR1632 battery in the remote control as instructed in Section 3.1 when needed.
- The optional fill light has a Type-C charging port. Use a 5W, 5V/1A (Type-C Cable) charger.
6. Troubleshooting
- Device not connecting via Bluetooth: Ensure the remote control is powered on (press and hold shutter for 2 seconds) and your phone's Bluetooth is enabled. Try re-pairing the device.
- Quick Wake function not working: Check if your phone model is listed under supported models in Section 4.2. Ensure you are using the correct button press sequence for your phone's screen state.
- Magnetic ring not holding securely: Ensure the magnetic ring was applied to a smooth phone case and allowed to sit for 2 hours before use. For MagSafe phones, using a MagSafe compatible case will provide a stronger connection.
- Magnetic ring blocking camera/light: Re-position the magnetic ring to ensure it does not obstruct the phone's camera lenses or flash, or the fill light's illumination.
- Remote control unresponsive: Check the CR1632 battery. Replace if necessary.
- Fill light not turning on/charging: Ensure the fill light is charged using a compatible Type-C cable and power adapter. Check the charging port for any debris.
7. Specifications
7.1 Fun Shot Magnetic Grip
| Feature | Specification |
|---|---|
| Product Name | Fun Shot Magnetic Grip |
| Model Number | P1-MP-10 |
| Material | ABS + PC + Aluminum Alloy |
| Product Dimensions | 124.7mm (4.91in) × 79.6mm (3.13in) × 37.7mm (1.48in) |
| Product Weight | 109g |
| Battery Model | Button Battery CR1632 |
| Battery Capacity | 130mAh |
| Bluetooth Compatibility | Common phone models |
7.2 Magnetic Fill Light (Optional)
| Feature | Specification |
|---|---|
| Main Unit Size | Diameter 60mm, Thickness ≤19mm |
| Touch-Up Mirror Size | Diameter 56mm |
| Weight | 80g |
| Maximum Power | 2.5W |
| Color Temperature | Adjustable in Three Levels (2700K Warm, 5600K Neutral, 7500K Cold) |
| Color Rendering Index (CRI) | ≥95 |
| Illuminance | 200lux @ 0.5m, 120° Light Angle |
| Battery Capacity | 500mAh / 3.7V |
| Runtime | ≥45 minutes at Max Brightness, ≥500 minutes at Min Brightness |
| Charging Parameters | 5W, 5V/1A (Type-C Cable) |
| Charging Port | Type-C ×1 |
| Operating Temperature | 5°C ~ 45°C |
| Package Size | 132*110*30mm |
| Package Weight | 150g |
*Data measured by Telesin Laboratory; actual performance may vary slightly due to environmental changes.
8. User Tips
- For the strongest magnetic connection, especially with iPhones, consider using a MagSafe compatible phone case.
- When attaching the magnetic ring to a non-MagSafe case, ensure it's placed accurately to avoid blocking the camera lenses or flash. Allow the adhesive to cure for at least 2 hours before use.
- The grip's remote control battery is designed for long life, lasting over 10 months with typical usage (3 hours/week, 100 photos/hour).
- Take advantage of the detachable remote for group photos or when you need to be in the shot.
- The ergonomic design with 9mm finger spacing and 45mm curvature is engineered for comfortable, fatigue-free shooting.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact the manufacturer directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.
10. Product Demonstration Video
Watch this video for a visual guide on how to use the TELESIN Fun Shot Magnetic Grip and its features.