1. Product Overview
This universal phone stand is designed to provide a stable and convenient platform for your mobile phone, suitable for various scenarios such as watching videos, video calls, and charging. It is compatible with most smartphones on the market with screen sizes ranging from 4.7 to 7.2 inches.
The holder features an upgraded eight-claw design for a secure grip, ensuring your device stays in place even on bumpy rides. Its 360-degree rotatable joint allows for optimal viewing angles, and it offers two versatile mounting options to suit different vehicles.


2. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Opansten |
| Compatibility | Smartphones with screen sizes 4.7 to 7.2 inches |
| Rotation | 360-degree rotatable joint |
| Mounting Options | Handle Bar Mounting (15mm-28mm), Mirror Base Mounting (8mm-10mm) |
| Package Dimensions | Length: 16 cm, Width: 12 cm, Height: 6 cm |
| Package Weight | 0.168 kg |


3. Setup and Installation
The Opansten phone holder offers two primary installation methods:
3.1 Handle Bar Mounting
This method is suitable for handlebars with diameters between 15mm and 28mm.
- Identify the handle bar mounting component.
- Attach the clamp to your vehicle's handlebar.
- Securely tighten the clamp using appropriate tools (not included) to ensure a firm grip.
- Attach the phone holder body to the mounting clamp.

3.2 Mirror Base Mounting
This method is ideal for mirror bases with diameters between 8mm and 10mm.
- Identify the mirror base mounting component.
- Unscrew the mirror from its base.
- Place the mirror base mounting bracket over the mirror's threaded post.
- Re-attach and tighten the mirror, securing the bracket in place.
- Attach the phone holder body to the mounting bracket.


4. Operating Instructions
Using the phone stand is extremely simple. Follow these steps for secure phone placement and removal:
- Initial Phone Placement and Securing:
Place your phone horizontally or vertically on the stand's support area. Ensure that the phone's bottom edge is firmly against the base and the back of the phone is in contact with the stand's backrest for stable support.
After inserting the phone, tighten the four knobs on the back of the product. These knobs adjust the grip of the eight claws to securely hold your phone. Once tightened for your phone's size, there is no need to move these knobs again when removing or re-inserting the same phone.

Figure 8: Inserting a phone into the holder. 
Figure 9: Tighten the four knobs on the back to secure the phone. 
Figure 10: The eight-claw design provides a secure grip. - Daily Phone Insertion/Removal:
Once the knobs are set for your phone, in daily use, simply pull open the top part (head) of the holder vertically to insert or remove your phone. The spring mechanism will allow for quick and easy access without needing to re-adjust the knobs.

Figure 11: Pull the head vertically to insert or remove the phone. 
Figure 12: Detail of the vertical pull mechanism for quick access. - Adjusting Viewing Angle:
Once placed correctly, you can adjust the viewing angle as needed by gently tilting the stand to find the most comfortable position for use, thanks to its 360-degree rotatable joint.
Important Note on Phone Changes:
If you switch to a different phone model or a phone with significantly different dimensions, you will need to readjust the four knobs on the back of the holder to fit the size of the new phone for optimal security.
5. Maintenance
- Cleaning: Wipe the holder with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners that could damage the material.
- Inspection: Periodically check all screws and mounting points to ensure they are tight and secure. Re-tighten if necessary.
- Storage: When not in use for extended periods, store the holder in a cool, dry place away from direct sunlight.
6. Troubleshooting
- Phone feels loose: Ensure all four adjustment knobs on the back are tightened appropriately for your phone's size. Verify the phone's bottom edge is against the base and the back is against the backrest.
- Holder wobbles: Check that the mounting clamp or mirror base attachment is securely fastened to your vehicle. Re-tighten all installation screws.
- Difficulty inserting/removing phone: Ensure you are pulling the top part of the holder vertically. If the knobs were recently adjusted for a different phone, they might need slight loosening before the first vertical pull.
7. User Tips
- Phone Compatibility: The holder is confirmed to work with various phone models, including larger ones like the Cubot King Kong X, as long as they fall within the 4.7-7.2 inch screen size range.
- Secure Adjustment: Always ensure the four back knobs are tightened for your specific phone size after initial placement. This ensures maximum stability and prevents accidental drops.
- Quick Access: Once adjusted, use the vertical pull mechanism for quick and convenient daily insertion and removal of your phone.
8. Warranty and Support
For any questions, technical support, or warranty claims, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
A detailed user manual is also available in PDF format for download: Opansten Mobile Phone Holder User Manual (PDF).