Introduction
Thank you for choosing the Edifier X2 Plus True Wireless Earbuds. These earbuds are designed to provide a high-quality audio experience with advanced features such as 13.6mm dynamic drivers, AI call noise cancelling, Bluetooth V6.0 connectivity, and a long battery life. This manual will guide you through the setup, operation, and maintenance of your new earbuds to ensure optimal performance and longevity.
Edifier X2 Plus True Wireless Earbuds, highlighting 35 hours playtime and 0.07s low latency.
Safety Information
- Do not expose the earbuds or charging case to extreme temperatures, humidity, or corrosive environments.
- Avoid dropping, impacting, or disassembling the device.
- Keep the device away from children and pets.
- Do not use harsh chemicals or strong detergents to clean the earbuds.
- Listen at moderate volume levels to prevent hearing damage.
- Ensure the charging port is dry before charging.
Package Contents
Please check the package contents to ensure all items are present:
- Edifier X2 Plus True Wireless Earbuds (Left and Right)
- Charging Case
- USB-C Charging Cable
- User Manual
Product Overview
The Edifier X2 Plus earbuds feature a semi-in-ear ergonomic design for comfortable wear. Each earbud is equipped with touch-sensitive controls for managing audio playback and calls. The compact charging case not only protects the earbuds but also provides extended battery life.
Edifier X2 Plus earbuds and charging case in white, showcasing design and features.
Setup
1. Charging the Earbuds and Case
Before first use, fully charge the earbuds and the charging case.
- Place the earbuds into the charging case.
- Connect the USB-C charging cable to the charging port on the case and a power source.
- The indicator light on the case will show charging status.
- A full charge provides 8 hours of playtime for the earbuds and an additional 27 hours from the charging case, totaling 35 hours.
- A quick 15-minute charge can provide up to 3 hours of playtime.
Charging details for the Edifier X2 Plus, illustrating 15-minute quick charge for 3 hours playtime and 35 hours total playtime.
2. Bluetooth Pairing
To connect your earbuds to a device:
- Open the charging case. The earbuds will automatically enter pairing mode (indicator lights will flash).
- On your device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select "EDIFIER X2 Plus" from the list.
- Once connected, the indicator lights on the earbuds will turn off or show a steady light, depending on the model.
Illustration of Bluetooth V6.0 technology, ensuring fast and stable connections.
3. EDIFIER ConneX App Installation
Enhance your experience by downloading the EDIFIER ConneX App:
- Scan the QR code provided in the product packaging or search for "EDIFIER ConneX" in your device's app store.
- Install the app and follow the on-screen instructions to connect your earbuds.
Screenshots of the EDIFIER ConneX App, demonstrating customization options and features.
Operating Instructions
Basic Controls
The Edifier X2 Plus earbuds feature touch controls for various functions. Specific touch gestures may vary; refer to the app or quick start guide for detailed instructions.
- Play/Pause: Single tap on either earbud.
- Next Track: Double tap on the right earbud.
- Previous Track: Double tap on the left earbud.
- Answer/End Call: Single tap on either earbud.
- Reject Call: Press and hold either earbud.
- Activate Voice Assistant: Triple tap on either earbud.
Game Mode
The earbuds feature a low-latency Game Mode for an enhanced gaming experience.
- Activate Game Mode via the EDIFIER ConneX App or a specific touch gesture (refer to the app or quick start guide).
- Game Mode reduces audio latency to 0.07s, providing quick feedback for gaming.
Edifier X2 Plus earbuds in use during gaming, demonstrating 0.07s low latency for an immersive experience.
Using the EDIFIER ConneX App
The EDIFIER ConneX App allows you to:
- Customize sound modes and equalizer settings.
- Adjust touch control functions.
- Rename your earbuds.
- Locate lost earbuds.
- Access firmware updates and additional features.
Maintenance
Cleaning
- Gently wipe the earbuds and charging case with a soft, dry, lint-free cloth.
- Do not use abrasive materials, alcohol, or chemical cleaners.
- Keep the charging contacts clean and free of debris.
Storage
- When not in use, store the earbuds in their charging case to protect them and keep them charged.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
Water Resistance (IP54)
The Edifier X2 Plus earbuds are IP54 rated, meaning they are protected against dust ingress and splashing water from any direction. This makes them suitable for workouts and light rain.
- Do not submerge the earbuds in water.
- The charging case is NOT dust or water-resistant.
- Protection may not be permanent and can deteriorate due to daily wear and tear.
- Ensure earbuds are dry before placing them back in the charging case.
Edifier X2 Plus earbuds demonstrating IP54 water resistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from earbuds | Earbuds not paired; low battery; volume too low. | Ensure earbuds are paired; charge earbuds; increase device volume. |
| Earbuds not pairing | Earbuds not in pairing mode; device Bluetooth off. | Open case to enter pairing mode; enable Bluetooth on device; forget device and re-pair. |
| Charging issue | Cable not connected properly; dirty charging contacts. | Ensure cable is secure; clean charging contacts; try a different cable/power source. |
| Poor call quality | Weak signal; microphone obstructed. | Move closer to your device; ensure microphone is clear. |
Specifications
Detailed specifications for Edifier X2 Plus.
| Feature | Specification |
|---|---|
| Bluetooth Version | V6.0 |
| Bluetooth Protocol | A2DP, AVRCP, HFP |
| Audio Coding | SBC |
| Driver Type | Dynamic |
| Driver Diameter | 13.6mm |
| Playtime | 8 hours (earbuds) + 27 hours (charging case) = 35 hours total |
| Fast Charging | 15 minutes charge for 3 hours playtime |
| Input (Charging Case) | 5V ⎓ 1A |
| Input (Earbuds) | 5V ⎓ 200mA |
| Frequency Response Range | 20Hz - 20kHz |
| Sound Pressure Level | 92 ± 3dB (A) |
| IP Rating | IP54 (earbuds only) |
| Charging Port | USB-C |
| Weight | 40g |
| Material | Plastic |
| Maximum Wireless Range | <10m |
| Active Noise-Cancellation | Yes (AI Call Noise Cancelling) |
| With Microphone | Yes |
| Support APP | Yes (EDIFIER ConneX) |
User Tips
- Optimal Fit: Experiment with how you place the semi-in-ear earbuds to find the most comfortable and secure fit for your ears, which can also improve sound quality.
- App Customization: Utilize the EDIFIER ConneX App to its full potential. Adjusting EQ settings can significantly enhance your listening experience based on music genre or personal preference.
- Charging Method: The Edifier X2 Plus earbuds charge via a USB-C port; wireless charging is not supported. Always use the provided USB-C cable or a certified equivalent for charging.
- Game Mode for Videos: While primarily for gaming, the low latency Game Mode can also improve audio-video synchronization when watching videos, especially on platforms where latency might be noticeable.
Warranty and Support
Edifier products are manufactured to the highest quality standards. For detailed warranty information and customer support, please refer to the warranty card included in your package or visit the official Edifier website. Keep your proof of purchase for any warranty claims.
