Introduction
This manual provides detailed instructions for the safe and efficient operation of your QYT KT-A16 Air Band Transmit Radio. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage. The QYT KT-A16 is a versatile handheld transceiver designed for air band communication, offering both transmit and receive capabilities within specified frequency ranges.
Product Overview
The QYT KT-A16 is a robust handheld radio featuring a clear TFT-LCD color screen and a numeric keypad for easy operation. It supports air band frequencies and offers 200 memory channels.

Figure 1: Front view of the QYT KT-A16 Air Band Radio.

Figure 2: QYT KT-A16 radio highlighting AirBand frequency range (118-135.975MHz).

Figure 3: External Components of the KT-A16 Radio.
- Antenna: For transmitting and receiving signals.
- Channel Knob: To select channels.
- Power/Volume Knob: To turn the radio on/off and adjust volume.
- Accessory Jack: For connecting external accessories (e.g., headset).
- Speaker: For audio output.
- Microphone: For voice input.
- MENU Key: Accesses the radio's menu.
- EXIT Key: Exits menus, switches A/B/C/D signals.
- UP Key: Navigates up in menus, increases values.
- DOWN Key: Navigates down in menus, decreases values.
- Numeric Keypad: For direct frequency input and function selection.
- ASQ (*) Key: Activates/deactivates ASQ (Automatic Squelch). Long press for Scan Key.
- ASQ (#) Key: Activates/deactivates ASQ (Automatic Squelch). Long press for Keylock switch.
- VFO/MR (Wx Ch.) Key: Switches between VFO (Variable Frequency Oscillator) and Memory Recall modes.
- PTT Key (Push to Talk): Press to transmit.
- Off Screen: Turns the display off.
- Belt Clip: For attaching the radio to a belt.
- External Speaker/MIC Connector: For connecting external speaker/microphone.

Figure 4: Display Indicators and Information.
- Hi/Lo power indicator: Shows high or low transmit power.
- Battery save Enabled: Indicates battery saving mode is active.
- Positive/Negative Offset indicator: Shows frequency offset direction.
- Power output indicator bar: Visual representation of transmit power.
- Battery level indicator: Displays current battery charge.
- Keylock Enabled: Indicates keypad is locked.
- Wide/Narrow band indicator: Shows current bandwidth setting.
- VOX function enabled: Indicates Voice Operated Transmit is active.
- Current working mode: Displays AM, FM, etc.
- Main Frequency: Primary operating frequency.
- Secondary frequency: Secondary operating frequency.
- Battery voltage indicator: Displays current battery voltage (e.g., DC: 7.2V).
- Noise intensity: Indicates signal strength.
- Signal strength: Visual representation of received signal strength.
- Model: Displays the radio model (e.g., Model: KT-A16).
Specifications
| Category | Parameter | Value |
|---|---|---|
| General | ||
| Frequency Range | TX | 118.00000-136.99975MHz |
| RX | 108.00000-136.99975MHz | |
| WX | 161.650-163.275MHz | |
| Channel Spacing | 25kHz/8.33kHz | |
| Mode | COM/NAV | 6k00A3E/5K60A3E |
| WX | 16K0G3E(WX) | |
| Number of Memory Channels | 200 | |
| Antenna Impedance | 50ohm | |
| Antenna Connector | SMA-Female | |
| Power Supply Requirement | 7.2V DC | |
| Current Drain | Less than 1.8A | |
| Operating Temperature Range | -10°C to +60°C | |
| Dimensions (W*H*D) | 62mm * 128mm * 35mm | |
| Weight | 239g (with 2000mAh Battery) | |
| Transmitter | ||
| Output Power | 6.0W (PEP), 1.8W (CW) | |
| Modulation Limiting | 70-100% | |
| Audio Harmonic Distortion | Less than 10% (at 60% modulation) | |
| Hum and Noise Ratio | More than 35dB | |
| Spurious Emissions | More than 46dB | |
| Frequency Stability | ±0.4kHz | |
| Receiver | ||
| Receive System | Double conversion superheterodyne | |
| Intermediate Frequencies | 1st 46.35MHz, 2nd 450kHz | |
| Sensitivity | COM | Less than 0dBu (at 6dB S/N) |
| NAV | Less than 3dBu (at 6dB S/N) | |
| WX | Less than -8dBu (at 12dB SINAD) | |
| Squelch Sensitivity (Threshold) | COM/NAV | Less than 0dBu |
| WX | Less than -5dBu | |
| Spurious Response Rejection Ratio | COM/NAV | More than 60dB |
| WX | More than 30dB | |
Setup
- Initial Battery Charge: For optimal battery life, fully charge the radio for 16 hours before its first use.
- Battery Installation/Removal: Always turn off the radio before installing or removing the battery.
- Attaching the Antenna: Screw the antenna firmly into the antenna connector on top of the radio. Do not hold the antenna during operation as this can affect signal range.
- Power On/Off: Rotate the Power/Volume knob clockwise to turn the radio on. Continue rotating to adjust the volume. Rotate counter-clockwise until it clicks to turn off.

Figure 5: Included accessories for the KT-A16 radio, typically including the radio unit, antenna, battery, and charging dock.
Operating Instructions
- Holding the Radio: When using the walkie-talkie, maintain a vertical distance of 5.0 to 7.0 cm between the microphone and your face for clear communication.
- Transmitting: Press and hold the PTT (Push to Talk) key to transmit. Release the PTT key to receive.
- Channel Selection: Use the Channel Knob to select desired channels or use the numeric keypad for direct frequency input.
- Menu Navigation: Press the MENU key to enter the main menu. Use the UP/DOWN keys to navigate and the EXIT key to go back or confirm selections.
- Hands-Free Operation: For convenience, especially while driving, consider using a hands-free speaker or headset connected to the accessory jack.
- Keylock: Long press the ASQ (#) key to activate or deactivate the keypad lock.
- Scanning: Long press the ASQ (*) key to initiate channel scanning.
Safety Guidelines
- Interference: Keep the radio at a distance greater than 10cm from televisions, computer monitors, and other screens to prevent electromagnetic interference.
- Storage: Avoid storing the interphone with other metal-containing objects to prevent magnetization or damage.
- Medical Devices: Walkie-talkies may interfere with certain hearing aids or other medical equipment. Consult your hearing aid manufacturer for alternatives if interference occurs. Turn off the radio in medical facilities or near sensitive medical equipment.
- Restricted Areas: Do not use the radio in airports or on aircraft. If operating a vehicle, pull over to a safe location before using the radio.
- Potentially Explosive Atmospheres: The radio must be shut down in potentially explosive areas unless it is a certified intrinsically safe intercom for such environments.
Maintenance
- Cleaning: Use a soft, damp cloth to clean the radio's exterior. Do not use harsh chemicals or abrasive cleaners.
- Battery Care:
- Avoid overcharging the battery.
- Store the battery in a cool, dry place when not in use.
- If the radio will not be used for an extended period, remove the battery.
- Antenna Care: Ensure the antenna is securely attached. Do not bend or force the antenna, as this can damage the connector or affect performance.
- Environmental Protection: Protect the radio from extreme temperatures, direct sunlight, dust, and moisture.
Troubleshooting
- No Power:
- Check if the battery is properly installed and charged.
- Ensure the Power/Volume knob is turned on.
- Cannot Transmit or Receive:
- Verify the antenna is securely attached.
- Check if the frequency/channel is correctly set.
- Ensure the battery has sufficient charge.
- Adjust squelch sensitivity if receiving only noise or no signals.
- Poor Audio Quality:
- Check volume level.
- Ensure microphone and speaker are clear of obstructions.
- Verify the antenna connection.
- Keypad Unresponsive:
- Check if the keypad lock is active (long press ASQ (#) key to toggle).
User Tips
- Language Settings: If you need to change the display language, navigate through the radio's menu settings. Some users have inquired about Spanish language options, indicating that language settings are a common customization point.
- Optimal Range: For best communication range, ensure the antenna is fully extended and the radio is held vertically.
Warranty & Support
For warranty information, technical support, or service inquiries, please contact your authorized QYT dealer or the point of purchase. Keep your purchase receipt as proof of purchase for warranty claims.
For further assistance, you may also refer to the contact information provided by the seller:
- WhatsApp/WeChat: Jack +86 19074935331
- Email: 3981883272@qq.com