1. Introduction
The LS VISION 35MP Four Screens WiFi IP Camera is an advanced surveillance system designed for comprehensive monitoring. Featuring seven lenses and four screens, it provides detailed coverage with 10X optical zoom on its three PTZ (Pan-Tilt-Zoom) cameras. This manual will guide you through the setup, operation, and troubleshooting of your new camera system.
Video: Overview of the LS VISION 35MP Four Screens WiFi IP Camera's features including PTZ control, auto-tracking, alarm functions, and night vision.
2. Specifications
The LS VISION 35MP camera boasts a unique seven-lens, four-screen design for extensive surveillance. It combines a fixed camera with three PTZ cameras, each offering 10X optical zoom. The total resolution is 35MP, with each of the seven lenses contributing 5MP.

Image: Specifications overview for the camera system.
Key Features:
- Lens Configuration: Seven lenses (one fixed, three PTZ with 10x optical zoom).
- Resolution: 35MP total (7 x 5MP lenses).
- PTZ Control: Horizontal 0~355 degrees, Vertical 0~90 degrees. Left and right PTZ cameras support 270° pan rotation (electric) and 90° tilt adjustment (electric).
- Zoom: 10X optical zoom on all three PTZ lenses.
- Antenna: High gain enhanced 5dBi antenna for wider signal reception.
- Night Vision: Built-in infrared LED and white LED for clear day/night images. Three image modes: Smart, Infrared (B&W, white LED off), and Color (white LED on, color vision). IR Distance up to 30M.
- Motion Detection: 24/7 motion detection with real-time push notifications.
- Humanoid Detection: All four screens support motion detection, human detection, and intelligent alarm.
- Automatic Tracking: Only the middle lens supports automatic tracking.
- Audio: Built-in high-quality speakers and microphones for two-way conversations, with echo suppression and noise cancellation.
- Connectivity: Supports 2.4GHz WiFi connection (does not support 5G WiFi) and RJ-45 network cable connection.
- Video Compression: H.264, H.265.
- Storage: Supports TF card up to 128GB and Cloud Storage (paid subscription).
- Operating Temperature: -20~+60 ℃.
- IP Rating: IP66 (Waterproof, Dustproof & UV-Resistant).
- Power Supply: DC 12V, 5W.
- Installation: Side, Normal, Wall Mounted, Vertical Pole Mount.
- Supported Mobile Systems: Android, iOS (APP: FF Video).
- Sensor: CMOS, SmartSens brand.
- Note: This camera does not support ONVIF to work with NVR or DVR. PC client is not supported.

Image: Visual representation of key features including multi-lens, alarms, tracking, two-way voice, night vision, and storage options.
3. Package Contents
Please check the package contents carefully upon receipt. If any items are missing or damaged, contact customer support.
- 1x PTZ Camera
- 1x User Manual
- 1x Power Supply
- 1x Screw Bag

Image: Detailed view of the camera's components and included accessories.

Image: Available power adapter plug types (EU, US, UK, AU).
4. Setup Guide
4.1. Mobile APP Download
The camera operates with the 'FFvideo' mobile application. Ensure your mobile device is connected to a 2.4GHz Wi-Fi network before proceeding.
- For domestic users: Search for "FFvideo" in your mobile application store.
- For overseas users: Search for "FFvideo" in your mobile application store.
- Alternatively, scan the QR code below to download the APP.
4.2. User Registration
- Open the FFvideo APP.
- Click "Sign up".
- Enter your mobile number and agree to the Privacy Policy.
- Click "Next".
- After receiving the verification code, enter it and set your password to complete registration.
4.3. Adding the Smart Camera
Before connecting, ensure the camera is powered using the standard adapter and your mobile is connected to a 2.4GHz Wi-Fi network.
- Open the FFvideo APP and click the "+" icon to add a device.
- Choose "Intelligence Camera".
4.3.1. AP Hotspot Addition
- Power on the camera. Listen for a voice broadcast. If no broadcast, press the reset button to restore factory settings.
- In the APP, select "Smart Camera" then "AP Hotspot".
- Follow the wizard to connect to the Wi-Fi network named "Cloud xxxx".
- Click "Next" after successful connection.
- Select the desired Wi-Fi network, enter the password, and click "Confirm".
- Wait for the APP to display "Added successfully".
4.3.2. Wired Connection (for devices with network ports)
- Connect a network cable from the camera's network port to your router.
- Power on the camera and wait for it to start, listening for a voice broadcast.
- In the APP, click "+", select "Smart Camera", and then "Direct Network Cable".
- Scan the QR code located on the camera's body.
- Wait for the addition to be successful.

Image: Diagram illustrating both 2.4G WiFi and Network Cable connection methods for the camera.

Image: Examples of wall and ceiling mounting for flexible installation.
5. Operation
5.1. Real-time Preview Interface
The FFvideo APP provides a comprehensive interface for real-time monitoring and control:
- Sound Switch: Toggle camera audio on/off.
- Screenshot: Capture the current screen.
- Voice Intercom: Engage in two-way communication with the camera's location.
- Screen Recording: Record live video directly from the app.
- Full Screen: Switch to full-screen landscape view.
- Night Vision Mode: Change between Smart, Infrared, and Color night vision modes.
- Closure: Turn video feed on/off.
- Intelligent Tracking: Activate automatic tracking of moving objects (only for the middle lens).
- Share: Share camera access with other users.
- Cloud Album: Access online photo album.
- Notify: Configure message notifications.
- Message: Displays current event messages (requires cloud service activation for video viewing).
- Playback: Playback recordings from SD card or Cloud Service.
- PTZ: Control the pan, tilt, and zoom of the PTZ lenses.
- Lighting: Turn on/off the white light for night vision.

Image: Mobile app interface showing four-screen online preview.
5.2. PTZ Control and 10X Optical Zoom
All three PTZ lenses can be controlled remotely via the mobile app, supporting horizontal and vertical rotation. They also feature 10X optical zoom for detailed viewing.
- Pan & Tilt: The middle PTZ camera supports 0~355 degrees horizontal pan and 0~90 degrees vertical tilt. The left and right PTZ cameras support 270° pan rotation (electric) and 90° tilt adjustment (electric).

Image: Mobile app interface demonstrating PTZ control for horizontal and vertical rotation.

Image: Visual representation of the 10X optical zoom capability across the three PTZ lenses.
5.3. Humanoid Detection and Alarm
The camera system supports humanoid detection across all four screens. When a person is detected, an intelligent alarm is triggered, and notifications are pushed to your mobile device.

Image: Illustrates the four-screen humanoid detection alarm, highlighting detected individuals.
5.4. Automatic Tracking
The middle lens of the camera supports automatic tracking, allowing it to follow moving objects within its field of view. Please note that the left and right lenses do not support this feature.

Image: Depicts the automatic tracking function, showing the middle lens following a person.
5.5. Red and Blue Light Alarm & Voice Alarm
Upon detecting a moving object, the camera will automatically flash red and blue lights and simultaneously issue a voice alarm to deter intruders.

Image: Shows the camera activating red and blue flashing lights and a voice alarm upon detecting an intruder.
5.6. Two-Way Audio
Equipped with a built-in microphone and speaker, the camera supports real-time two-way voice intercom. This allows you to communicate with visitors or deter unwanted individuals from anywhere.

Image: Illustration of the two-way voice intercom feature, showing communication with a person near the camera.
5.7. Night Vision Modes
The camera offers versatile night vision capabilities:
- Infrared Mode: Infrared LEDs are active, providing a clear black and white image. White LEDs are off.
- Color Mode: White LEDs illuminate the area, providing a full-color vision even in low light conditions.
- Smart Mode: Automatically switches between infrared and color modes based on detected motion or light conditions.

Image: Comparison of infrared night vision (black and white) and color night vision.
5.8. Device Sharing
You can share access to your camera with family members. After setting up the camera in the main account, you can generate a QR code to share viewing permissions.

Image: Shows how to share camera access with multiple family members using a QR code.
5.9. Web Login
You can also view live video from your camera through a web browser:
- Open your overseas computer browser and navigate to https://FFvideo.ucloudcam.com.
- Enter your account and password to log in and watch the live video.
6. Storage Options
The camera supports both local and cloud storage solutions for your video recordings.
- SD Card Storage: Insert a TF card (up to 128GB) into the designated slot for local video recording.
- Cloud Storage: A paid subscription service is available for cloud-based video storage, allowing you to access recordings from anywhere.

Image: Icons representing Cloud Storage (paid subscription) and SD Card Storage (up to 256G supported).
7. Maintenance
7.1. Environmental Protection
The camera is designed for outdoor use with an IP66 rating, making it waterproof, dustproof, and UV-resistant. This ensures reliable operation in various weather conditions.

Image: The camera installed outdoors, highlighting its IP66 waterproof capabilities.
7.2. Screen Abnormal Inspection
The camera system can detect and report screen abnormalities such as abnormal brightness, color cast, video loss, blurred video, stripes, and snowflakes. A test report will be generated and pushed to your device.
- In the device list or "My" interface, click the "Screen Inspection" button.
- Select the corresponding device to view the inspection report.
8. Troubleshooting (FAQ)
8.1. Why can't I add devices through Wi-Fi connection?
- Ensure the device has been restored to factory settings (long press the reset button until a voice prompt is issued).
- The camera only supports 2.4GHz Wi-Fi signals. If you have a 5G router, disable dual-band mode or select the 2.4G signal.
- Confirm the distance between the router and the camera is within a reasonable range for signal strength.
8.2. Why is the recording intermittent?
Cloud service trial packages, alarm recording packages, and TF card event recording modes only record when the camera detects motion. Therefore, recordings may not be continuous.
8.3. Why do I choose to record continuously or intermittently after inserting the TF card?
- Ensure the video viewing channel is selected as "SD card" and format the SD card first. If it's still intermittent, the SD card might have bad sectors.
- Make sure the recording mode is turned on and "all day recording" is enabled in the settings.
8.4. Why can't the mobile phone receive alarm messages?
- Confirm that notification push permissions for the FFvideo APP are enabled in your mobile phone settings.
- Turn on "message notification" in the APP's notification settings.
- Ensure the current time is not within any planned notification-stopping period.
8.5. What to do when the display camera is disconnected?
First, check if the power supply and network connection are normal. If there are no issues, power off and restart the camera. If it remains disconnected after restarting, remove the camera from the APP and then add it again.
8.6. Why can't the shared account operate the camera?
For security reasons, permissions for shared accounts are restricted, and they cannot operate the camera. If others need to operate the camera, they should log in directly using the bound account and password.
8.7. What should I do if I need to change a Wi-Fi network to connect the camera?
There are two methods:
- If the camera remains in the same location and can detect the new Wi-Fi network: Go to the parameter setting menu in the APP, select "change the Wi-Fi connected to the device", and choose the new Wi-Fi.
- If the camera has been moved to a new location and cannot find the previous Wi-Fi: Reset the camera to factory settings and reconfigure the network as per the initial setup instructions.
8.8. How to view SD card video on mobile phone and computer?
Ensure an SD card is inserted into the device. You can view SD card video directly through the FFvideo APP. For computer viewing, log in to https://FFvideo.ucloudcam.com with your account when the APP can view the video normally.
9. User Tips
- For optimal performance, ensure your camera is installed in a location with strong 2.4GHz Wi-Fi signal coverage.
- Regularly check the FFvideo app for firmware updates to ensure your camera has the latest features and security enhancements.
- When using the automatic tracking feature, be aware that only the middle lens supports this function. Position the camera accordingly for the best tracking results.
10. Warranty and Support
Your LS VISION camera comes with a 1-year warranty. For any questions or technical assistance, please contact our 7/24 technical support service.

Image: 1 Year Warranty information.
11. Statement of Compliance
Disclaimer
⚠️ Camera products can only be used for purposes permissible under applicable law and regulations. Misuse of the product for any illegal activities is strictly forbidden. Please comply with the applicable laws and regulations in your country/area.