KKMOON YZD04

Contents

KKMOON YZD04 4-Zone Watering Timer

Instruction Manual

Introduction

Thank you for choosing the KKMOON YZD04 4-Zone Watering Timer. This device is designed to automate your garden and lawn irrigation, providing efficient and precise watering for up to four independent zones. With features like programmable schedules, rain delay, and a child lock, it ensures your plants receive optimal hydration while conserving water. Please read this manual carefully before installation and operation to ensure proper use and longevity of your watering timer.

KKMOON YZD04 Watering Timer with feature icons
Figure 1: Product Overview highlighting features like Watering Regularly, Manual Watering, 4 Zones, Waterproof Design, Child Lock, and Rain Delay.

Safety Information

  • Ensure the timer is securely attached to the faucet to prevent leaks.
  • Do not immerse the timer in water, despite its IPX5 rating, to avoid damage.
  • Use only recommended battery types (4 x AA Alkaline batteries).
  • Keep out of reach of children when not in use, or activate the child lock feature.
  • Protect the timer from freezing temperatures by removing it from the faucet and storing it indoors during winter.

Package Contents

Please check the package to ensure all items are present:

  • 1 x Irrigation Timer (Model: YZD04)
  • 4 x Hose Connectors
  • 1 x Brass Faucet Connector Part (3/4 inch female thread)
  • 1 x Sealing Tape
  • 1 x Sealing Gasket
  • 1 x Instruction Manual
KKMOON YZD04 Watering Timer and included accessories
Figure 2: The YZD04 Watering Timer with its complete set of accessories, including connectors, brass inlet, tape, and gasket.

Specifications

FeatureDetail
ModelYZD04
MaterialABS, Brass (Inlet)
Working Pressure0.5-8 bar (7.25 psi - 116 psi)
Inlet Connector Size3/4 inch female thread
Working Temperature4.5℃ - 45℃ (40.1℉ - 113℉)
Battery Type4 x AA Alkaline batteries (not included)
IP RatingIPX5 (Waterproof Design)
Zone Control4 independent watering zones
Sequential LogicOnly one zone runs at a time
Rain Delay Time1-15 days
Set Watering Time10 seconds - 360 minutes
Set Watering Frequency1-23 hours, 1-15 days
Dimensions (L x H x W)197mm x 133mm x 78.5mm
Dimensional drawing of the KKMOON YZD04 Watering Timer
Figure 3: Detailed dimensions of the YZD04 Watering Timer.

Setup

  1. Install Batteries: Open the battery compartment on the back of the timer. Insert 4 new AA Alkaline batteries, ensuring correct polarity. Close the compartment securely.
  2. Back view of KKMOON YZD04 Watering Timer with battery compartment open
    Figure 4: Battery compartment location and specifications label on the back of the timer.
  3. Connect to Faucet: Wrap the included sealing tape around the threads of your outdoor faucet. Screw the brass faucet connector part onto the faucet. Then, attach the main timer unit to the brass connector, ensuring a tight, leak-free connection.
  4. Connect Hoses: Attach your garden hoses to the four independent outlets (Zone 1, Zone 2, Zone 3, Zone 4) at the bottom of the timer. Ensure each connection is secure.
  5. KKMOON YZD04 Watering Timer connected to a faucet with four hoses
    Figure 5: The 4 programmable outlets connected to a faucet and leading to different garden areas.

Operating Instructions

The YZD04 timer features a user-friendly interface with a central dial and touch buttons for easy programming.

Front view of the KKMOON YZD04 Watering Timer display and controls
Figure 6: Front view of the timer, showing the LCD display, Zone/OK/Manual buttons, and the rotary dial.

1. Setting the Clock

  • Turn the dial to 'Set Clock'.
  • Use the '+' and '-' buttons to adjust the current time.
  • Press 'OK' to confirm and move to the next setting (e.g., AM/PM or minutes).

2. Programming Watering Schedules (Program Each Zone)

The timer allows independent programming for each of its 4 zones. The system employs a sequential logic, meaning only one zone will run at a time to maintain stable water pressure.

Programming options for each zone on the KKMOON YZD04 Watering Timer
Figure 7: Programming interface detailing options for Start Time, How Long, and How Often.
  1. Select Zone: Press the 'Zone' button to cycle through Zone 1, Zone 2, Zone 3, and Zone 4.
  2. Set Start Time: Turn the dial to 'Start Time'. Use '+' and '-' to set the desired start time for the selected zone (24-hour or 12-hour with AM/PM format). Press 'OK' to confirm.
  3. Set Watering Duration ('How Long'): Turn the dial to 'How Long'. Use '+' and '-' to set the watering duration from 1 minute to 360 minutes. Press 'OK' to confirm.
  4. Set Watering Frequency ('How Often'): Turn the dial to 'How Often'. Use '+' and '-' to set the frequency: every 1 hour, 3 hours, 6 hours, or every 1-30 days. Press 'OK' to confirm.
  5. Repeat steps 1-4 for each zone you wish to program.
  6. Once all zones are programmed, turn the dial to 'AUTO' to activate the schedule. The timer will display a real-time countdown to the next watering cycle.

3. Manual Watering

To water manually without affecting your programmed schedules:

Manual watering feature of the KKMOON YZD04 Watering Timer
Figure 8: Manual watering in progress, showing the duration bar from 1 to 360 minutes.
  • Turn the dial to 'Manual'.
  • Use '+' and '-' to set the desired manual watering duration (10 seconds to 360 minutes).
  • Press 'OK' to start manual watering.
  • To stop manual watering, turn the dial to 'OFF' or press 'Manual' again.

4. Rain Delay

To prevent overwatering during rainy periods, you can activate the rain delay feature:

Rain Delay feature on the KKMOON YZD04 Watering Timer
Figure 9: Rain Delay options, allowing users to skip watering for 1 to 7 days.
  • Turn the dial to 'Delay'.
  • Use '+' and '-' to set the rain delay duration from 1 to 15 days.
  • Press 'OK' to activate the rain delay. The timer will pause all scheduled watering for the set period.
  • To cancel rain delay, turn the dial to 'OFF' and then back to 'AUTO'.

5. Child Lock

To prevent accidental changes to your settings:

  • While in 'AUTO' mode, long press the '-' key for 5 seconds to activate the child lock. A lock icon will appear on the display.
  • To deactivate, long press the '-' key again for 5 seconds.

6. Turning Off the Timer

  • Turn the dial to 'OFF' to stop all watering programs and manual operations.

Maintenance

  • Battery Replacement: Replace batteries when the low battery indicator appears on the display. Always use fresh AA Alkaline batteries.
  • Cleaning: Periodically clean the exterior of the timer with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • Winter Storage: Before the first frost, disconnect the timer from the faucet, remove the batteries, and store the unit indoors in a dry, protected area to prevent freezing damage.
  • Check for Leaks: Regularly inspect all connections for leaks and tighten if necessary. Replace sealing gaskets if they show signs of wear.
KKMOON YZD04 Watering Timer highlighting waterproof features
Figure 10: The IPX5 waterproof design, featuring a 360-degree rotating inlet, metal copper construction, and sealing rings for durability.

Troubleshooting

  • Timer not turning on: Check battery installation and ensure batteries are fresh.
  • Water not flowing: Ensure the faucet is fully open. Check if the timer is in 'OFF' mode or if rain delay is active. Verify hose connections are not blocked.
  • Leaks from connections: Ensure all connections are tight. Apply more sealing tape if necessary. Check and replace worn sealing gaskets.
  • Programs not running: Ensure the dial is set to 'AUTO'. Check if the child lock is active. Verify that the start time, duration, and frequency are correctly set for each zone.
  • Display is blank or dim: Replace batteries.

User Tips

  • For optimal performance, always use high-quality alkaline batteries and replace them annually, or when the low battery indicator appears.
  • Utilize the rain delay feature to conserve water and prevent overwatering during natural rainfall.
  • Take advantage of the 4 independent zones to customize watering needs for different plant types or garden areas.
  • The sequential logic ensures stable water pressure across all zones, so plan your watering times accordingly if you have specific pressure requirements.

Warranty and Support

The KKMOON YZD04 Watering Timer is designed for durability and reliable performance. For any issues or questions not covered in this manual, please contact your retailer or the manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.