1. Introduction
The Cayin MT-45MK3 is a high-fidelity vacuum tube integrated amplifier designed to deliver a sweet, detailed, and dynamic audio experience. This amplifier features a robust design with special handmade power and output transformers, ensuring quiet performance and sufficient power for various speakers. It is available in models with or without Bluetooth 5.0 connectivity, allowing for versatile audio input options.
Important Note: This amplifier operates on 220V power. Ensure your power supply matches this requirement before connecting the device.
2. Safety Information
- Always ensure the amplifier is disconnected from the power outlet before performing any maintenance or connecting/disconnecting cables.
- Do not expose the amplifier to moisture or extreme temperatures.
- The vacuum tubes can become very hot during operation. Avoid touching them to prevent burns.
- Ensure adequate ventilation around the amplifier to prevent overheating.
- Do not attempt to open the amplifier casing or perform repairs yourself. Refer all servicing to qualified personnel.
- Use only the specified power voltage (220V) to prevent damage to the unit and potential safety hazards.
3. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- Cayin MT-45MK3 Electronic Tube Power Amplifier
- Power Cable
- Bluetooth Antenna (for models with Bluetooth 5.0)
- Spare Fuses
- Cleaning Cloth
- Printed User Manual

4. Product Overview
4.1 Front Panel

- Volume Knob: Adjusts the overall output volume.
- Power Level Meters: Dual function meters for monitoring power output and assisting with bias adjustment.
- Selector Knob: Switches between input sources (LINE1, LINE2, LINE3, Bluetooth).
- Phones Jack: 6.35mm headphone output for private listening.
4.2 Rear Panel

- LINE1, LINE2, LINE3 Inputs: RCA stereo inputs for connecting external audio sources.
- Bluetooth Input: (For models with Bluetooth 5.0) Wireless input for streaming audio from Bluetooth-enabled devices.
- Speaker Outputs (4 ohm, 8 ohm): Binding posts for connecting speakers with 4 or 8 ohm impedance.
- Power Inlet: For connecting the supplied power cable.
4.3 Internal Components & Design Highlights
- Vacuum Tubes: Features ECF82x2 for voltage amplification, ECC82x2 for the driver stage, and KT88x4 for power output in Class AB1 Push-Pull Mode.
- Point-to-Point Wiring: Internal circuits are hand-wired by experienced technicians using high-standard wires and components for optimal signal integrity.

Figure 4.3: Hand-made Point-to-Point Wiring - Transformers: Utilizes Cayin House Design Toroidal Power Transformer and EI Output Transformers for low magnetic leakage and wide frequency response.
- Removable Tube Protection Cage: A metallic cage is included to protect the vacuum tubes.

Figure 4.4: Removable Tube Protection Cage
5. Setup
- Unpacking: Carefully remove the amplifier and all accessories from the packaging.
- Tube Installation (if necessary): If tubes are not pre-installed, gently insert each tube into its corresponding socket, aligning the pins with the socket holes. Refer to the markings on the amplifier for correct placement (ECF82, ECC82, KT88).
- Placement: Place the amplifier on a stable, level surface with adequate ventilation around it. Ensure it is away from direct sunlight, heat sources, and moisture.
- Connect Speakers: Connect your speakers to the appropriate 4 ohm or 8 ohm speaker output terminals on the rear panel using high-quality speaker cables. Ensure correct polarity (+ to + and - to -).

Figure 5.1: Speaker and Input Connections - Connect Audio Sources: Connect your audio sources (e.g., CD player, DAC, streamer) to the LINE1, LINE2, or LINE3 RCA inputs on the rear panel.
- Connect Bluetooth Antenna (if applicable): For models with Bluetooth, screw the provided Bluetooth antenna into its designated port on the rear panel.
- Power Connection: Ensure the amplifier's power switch is in the "OFF" position. Connect the supplied power cable to the power inlet on the rear panel and then to a 220V AC power outlet.
6. Operating Instructions
- Power On: Flip the power switch on the front panel to the "ON" position. The tubes will begin to warm up, and the power level meters may illuminate. Allow a few minutes for the tubes to reach optimal operating temperature.
- Select Input: Turn the "Selector" knob on the front panel to choose your desired audio source (LINE1, LINE2, LINE3, or Bluetooth).
- Adjust Volume: Slowly turn the "Volume" knob clockwise to increase the sound level. Start with a low volume and gradually increase it to a comfortable listening level.
- Triode / Ultralinear Mode Selection: The amplifier offers two operating modes:
- Triode Mode: Provides a soft and smooth sound, ideal for vocals and instruments.
- Ultralinear Mode: Offers a more open sound with a wider sound field, suitable for dynamic music.
Switch between these modes using the dedicated switch (if present, otherwise it's an internal setting or fixed mode). Refer to the amplifier's specific configuration for this feature.

Figure 6.1: Triode / Ultralinear Mode (if applicable) - Headphone Use: Plug your 6.35mm headphones into the "Phones" jack on the front panel. This will typically mute the speaker outputs. Adjust volume using the main volume knob.
- Bluetooth Operation (for models with Bluetooth 5.0):
- Select "Bluetooth" as the input source using the Selector knob.
- On your Bluetooth-enabled device (e.g., smartphone, tablet), search for available Bluetooth devices.
- Select "Cayin MT-45MK3" (or similar name) from the list to pair.
- Once paired, you can stream audio wirelessly to the amplifier.

Figure 6.2: Bluetooth Connectivity
- Bias Adjustment/Monitoring: The dual function meters on the front panel can be used to monitor the power output and assist with bias adjustment of the power tubes. Consult the full manual or a qualified technician for detailed bias adjustment procedures.

Figure 6.3: Dual Function Meters
7. Maintenance
- Cleaning: Use the provided cleaning cloth or a soft, dry cloth to wipe the amplifier's exterior. Do not use liquid cleaners or abrasive materials.
- Tube Replacement: Vacuum tubes have a finite lifespan and may need replacement over time. If you notice a degradation in sound quality or tube failure, consult a qualified technician for tube replacement. Ensure replacement tubes are of the correct type (ECF82, ECC82, KT88).
- Tube Protection Cage: The metallic tube protection cage can be removed for cleaning or tube access, but ensure the amplifier is powered off and cooled down before removal.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable disconnected; Power switch off; Blown fuse; Incorrect voltage. | Check power cable connection; Ensure power switch is ON; Replace fuse (refer to spare fuses); Verify 220V power supply. |
| No sound | Incorrect input selected; Volume too low; Speaker cables disconnected/incorrectly wired; Faulty audio source; Headphone connected. | Select correct input; Increase volume; Check speaker connections and polarity; Test with another audio source; Disconnect headphones. |
| Distorted sound | Overdriven input signal; Faulty tubes; Incorrect speaker impedance match. | Reduce input source volume; Consult technician for tube check/replacement; Ensure speakers match 4 or 8 ohm output. |
| Humming or buzzing noise | Ground loop; Interference from other electronics; Faulty tubes. | Try isolating power to amplifier; Move amplifier away from other electronics; Consult technician for tube check. |
| Bluetooth not connecting | Bluetooth input not selected; Device not in pairing mode; Out of range; Interference. | Select Bluetooth input; Ensure device is discoverable; Move device closer; Reduce interference. |
9. Specifications
Amplifier
- Power Output RMS (KT88): 2 x 40W (ultralinear mode), 2 x 20W (triode mode)
- Frequency Response: 8 Hz - 60 kHz (-3dB)
- Input Sensitivity: 300mV
- Input Impedance: 100Kohms
- Tubes Used: ECF82x2, ECC82x2, KT88x4
- Output Impedance: 4 ohm, 8 ohm
- Headphone Output: 16Ω~300Ω
- Inputs: LINE1, LINE2, LINE3, Bluetooth (for models with Bluetooth module)
- THD+N: 0.2% (1W/1kHz)
- S/N Ratio: 90dB (A-Weighted)
- Power Consumption: 280W
- Dimension (W x H x D): 300mm x 385mm x 190mm
- Net Weight: 16.5kg
Bluetooth (for models with Bluetooth module)
- Bluetooth Version: V5.0
- Bluetooth Chip: QCC5125
- DAC Chip: ES9018K2M
- Audio Format: UAT, LDAC, apt-X, apt-X HD, apt-X Low latency, SBC, AAC
- Effective Range: ≤10M

10. User Tips
- Power Voltage: As noted in the introduction, this amplifier is designed for 220V power. Always confirm your local power supply matches this requirement to avoid damage.
- Warm-up Time: Allow the amplifier a few minutes to warm up after powering on for optimal sound performance. Tube amplifiers typically sound best after a short warm-up period.
- Speaker Matching: Pay attention to your speaker's impedance (4 ohm or 8 ohm) and connect them to the corresponding terminals on the amplifier for the best sound and to prevent damage.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.