Lefant M330 Pro Robot Vacuum and Mop Combo

1. Important Safety Instructions

Please read this instruction manual carefully before using the product and keep it in a safe place for future reference. Failure to follow these warnings and instructions may result in electric shock, fire, or serious injury.

General Safety Precautions:

• The robot must be used in accordance with the directions in this user manual.
• Do not allow to be used as a toy. Close attention is necessary when used by or near children. Do not allow children to sit on the vacuum.
• Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Robot. Tuck rug fringe under the rug base; lift items such as curtains and table cloths off the floor.
• If there is a drop off in the cleaning area due to a step or stairs, you should operate the robot to ensure that it can detect the step necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
• Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
• Please make sure your power supply voltage matches the power voltage marked on the docking station.
• Do not handle or plug appliance with wet hands.
• Non-rechargeable batteries are prohibited.
• Do not use without dust bin and/or filters in place.
• Do not operate the robot in an area where there are lit candles or fragile objects on the floor to be cleaned.
• Do not use and store in extremely hot or cold environments (below -5°C /23°F or above 40°C/104°F). Please charge the robot in temperature above 0°C/32°F and below 40°C/104°F. Follow all charging instructions and do not charge the battery pack or appliance outside of the temperature range specified in the instructions. Charging improperly or at temperatures outside of the specified range may damage the battery and increase the risk of fire.
• Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
• Do not operate the robot in a room where an infant or child is sleeping.
• For INDOOR use ONLY. Do not use the robot in outdoor, commercial or industrial environments. Do not use robot on wet surfaces or surfaces with standing water.
• Do not allow the robot to pick up large objects like stones, large pieces of paper or any item that may clog the robot.
• Do not use the robot to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
• Do not use the robot to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
• Do not put any object into openings. Do not use with any opening blocked; keep free of dust, lint, hair, and anything that may reduce air flow.
• Take care not to damage the power cord. Do not pull on or carry the robot or the docking station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run the robot over the power cord. Keep power cord away from hot surfaces. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
• Do not use the docking station if it is damaged.
• Do not use the robot or the docking station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
• Power off the power switch before cleaning or maintaining the robot. Power off all controls.
• The plug must be removed from the receptacle before cleaning or maintaining the docking station.
• Remove the robot from the docking station, and power off the power switch to the robot before removing the battery for disposal of the robot.
• The battery must be removed and discarded according to local laws and regulations before disposal of the robot.
• Please dispose of used batteries according to local laws and regulations.
• Do not incinerate the robot even if it is severely damaged. The batteries can explode in a fire.
• When not using the docking station for a long period of time, please unplug it.
• Prevent unintentional starting. Ensure the switch is in the off position before connecting to battery pack, picking up or carrying the robot. Carrying the robot with your finger on the switch or energizing the robot that have the switch on invites accidents.
• When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws, etc, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
• Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
• Do not use a battery pack that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
• Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 130°C/265°F may cause an explosion.
• Have servicing performed by a qualified repair person using only identical replacement parts.
• Do not modify or attempt to repair the robot or the battery pack (as applicable) except as indicated in the instructions.
• Do not operate the robot in a room that has lit candles on furniture that the vacuum may accidentally hit or bump into.
• Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may pose a risk of fire when used with another battery pack.
• Use the robot only with specifically designated battery packs. Using any other battery packs may pose risks of injury and fire.
• The robot contains batteries that are only replaceable by skilled persons. To replace the robot's battery, please contact Customer Service.
• If the robot is not going to be used for a long time, fully charge the robot, power it off, and unplug the station.
• Please remove any fragile and miscellaneous items from the floor (such as vases, plastic bags, etc.) to prevent the robot from being obstructed or causing damage to valuable items in the home due to minor collisions.

RF Exposure Requirements:

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

Symbols:

WARNING: For the purposes of recharging the battery, only use the detachable supply unit provided with this appliance.

2. Product Overview

How to Use the Button:

1. Hold for 3 seconds: Power on (Robot charging will power on automatically).
2. Fast press: Start/Pause.
3. Fast press twice: Auto-recharge.
4. Hold for 6 seconds: Enter network pairing mode (Networking operation: Open the App, select ‘Add Device', then press and hold for 6 seconds to hear the voice prompt, wait for the App to scan the device and then follow the networking guidelines to pair it.)
5. Hold for 12 seconds: Power off.

Indicator Light Status:

Robot Components (Top View):

Image: Top view of the Lefant M330 Pro robot vacuum, showing laser navigation sensors, start/pause button, dust bin, avoidance sensor, anti-collision strip, and air outlet.

Robot Components (Bottom View):

Image: Bottom view of the Lefant M330 Pro robot vacuum, showing anti-falling sensor, universal wheel, charging electrode, side brushes, battery, suction port, drive wheel, and mop holder mounting hole.

Dust Bin Components:

Image: Exploded view of the dust bin, showing dust bin body, filter bracket, filter cotton, and high-efficiency filter.

Docking Station Components:

Image: Docking station with power adapter, infrared signal transmitter, charging electrode, indicator light, power adapter socket, and soft rubber adhesive slot.

Water Tank Assembly:

Image: Water tank assembly showing seal plug, water tank, and mop attachment.

Included Accessories:

• Cleaning brush
• Double-sided soft rubber
• Quick guide
• User manual (this document)
• Side brushes (pair)

3. Setup and Installation

Preparation Before Use:

Before starting, please clear the floor of scattered wires, hard objects, sharp items (such as nails and glass) and other debris. Also, remove items that are prone to falling, fragile, valuable or potentially hazardous. This prevents the robot from getting entangled, stuck, dragged, or knocked down, which could cause damage to people or property.

If this product is used in a suspended environment (e.g., near stairs), be sure to use a sturdy physical barrier to prevent personal or property damage caused by the robot accidentally falling.

Remove Protective Film:

Remove the protective film from the robot and docking station before first use.

Install the Side Brushes:

Push the side brushes down firmly onto their posts until you hear a “click”. This indicates that they are securely in place.

Docking Station Installation:

1. Connect the docking station to the adapter.
2. Position the docking station against a wall on a flat surface. Ensure there are no items within 0.5m (1.64 ft) to the left or right and 1.5m (4.92 ft) in front to avoid blocking the charging signal. Avoid having reflective objects, such as floor mirrors, near the docking station to prevent signal reflection.
3. Optional: To secure the docking station, attach the double-sided soft adhesive to the back or bottom of the charging dock and press it firmly against the wall or floor.

Initial Charging:

Place the robot with its button side facing the docking station. When the button light starts to blink, it indicates correct placement. If the robot is charging while powered off, it will automatically power on.

Water Tank Installation (for Mopping Function):

1. Stick the mop cloth to the bottom of the water tank.
2. Open the silicone seal plug of the water tank and fill the tank with clean water.
3. Align the fixing posts of the water tank with the installation holes on the bracket, then press vertically downwards until the water tank is fully attached to the bottom of the robot. Once this is done, the installation is complete, and you can use the mopping function normally.

4. Operating the Robot

Connecting to the Lefant App:

You can scan the QR code on the manual's cover or download the "Lefant" app from your app store to connect to the robot and unlock more features.

Image: Step-by-step guide for connecting the Lefant Robot to the app, including downloading the app, adding the device, connecting to 2.4GHz/5GHz Wi-Fi, turning on the robot, pressing the start button for 6 seconds, and pairing.

Kind Reminder:

• After the installation of the robot, please follow the instructions on the mobile app to complete registration, logging in, and network configuration.
• Before configuring the network, please ensure that your phone and home network are connected.
• This robot is only compatible with 2.4GHz, 2.4GHz/5GHz, 5GHz Wi-Fi networks.

Connecting to Alexa:

Image: Step-by-step guide for connecting the Lefant Robot to Alexa, including opening the Lefant APP, recording voice account/password, opening Alexa APP, searching "Smart Life", enabling skill, selecting region, and waiting for connection.

Key Features and Operation:

• dTOF Navigation for Customizable Maps: Precision Laser Mapping for the Ultimate Hands-Free Clean. The robot uses dTOF Laser Mapping with a 15m radius for 360° Instant Room Mapping and AI-Optimized Routes for Efficient Cleaning.
• Precision Obstacle Detection and Avoidance: Features 190° PSD™ Obstacle Avoidance for Blind-Spot Free Detection and Zero Collision Navigation.
• Small but Mighty: At only 28 cm (11 inches) in diameter, the M330 Pro effortlessly navigates every tight corner in your home, including under dining tables and nightstands.
• 3-in-1 Cleaning Power: Sweeps, vacuums, and mops in one smart machine, tackling dust to stains. It features a 200ml water tank and 99% cleaning efficiency.
• APP and Voice Control: Voice-activated and App-enhanced for next-level cleaning freedom. Works with Amazon Alexa and Google Assistant, supporting Dual-band Wi-Fi (2.4GHz & 5GHz). Features include Multi-Level Mapping, Custom Routines, Smart No-Go Zone, and Do Not Disturb Mode.
• Smart Surface Adaptation: Carpet Detection with Automatic Power Boost for Deeper Cleaning. In mopping mode, it avoids carpets to prevent staining and getting stuck. In vacuum mode, it automatically increases suction power on carpets for maximum cleaning efficiency. When the mop holder is installed, carpets can serve as no-go zones, preventing entry into areas like bathrooms and balconies.
• Adjustable 3-Level Suction: Three powerful suction levels (Quite, Standard, Max) tackle any mess, while the tangle-free vacuum port makes pet hair pickup effortless for dust, pet hair, coffee beans, and pet food.
• No-Go Zones Mastery: Set no-go zones to prevent your robot vacuum from entering unwanted areas, protecting fragile items and pet spaces.
• Auto-Resume Tech: Ensures zero gaps and total coverage. If the battery falls below 15% during cleaning, the robot will return to the charging dock, recharge, and then resume cleaning from where it left off.
• Smart Custom Mode: Adjust power and frequency to customize cleaning for every room. Enjoy personalized cleaning with smart mapping, scheduling cleaning time, and customizing cleaning for every room.

Video: An overview of the Lefant M330 Pro's features, including its compact size, dTOF laser mapping, obstacle avoidance, 3-in-1 cleaning, carpet detection, no-go zones, auto-resume, and smart custom cleaning modes.

5. Maintenance

Mop Cloth Removal and Maintenance:

1. You can easily remove the water tank by pulling it upward from the rear of the water tank.
2. Remove the top cover of the water tank.
3. After cleaning or replacing the mop cloth, please refer to the "Water Tank Installation Instructions" to reinstall the water tank assembly, and then you can continue mopping.

Warm Tips:

• If you use disposable mop cloths, please directly discard them after use and replace with new ones.
• For washable mop cloths, please clean them in a timely manner after use or replace them according to the actual wear and tear.
• When the whole-house cleaning is completed or the mopping function is not needed temporarily, be sure to drain all the water in the water tank in a timely manner to prevent the remaining water inside the tank from continuously seeping out and causing water stains or puddles on the floor.

Friendly reminder: After finishing the mopping task, please thoroughly clean the mop immediately and dry it in a well-ventilated area. This is to avoid the mop from developing an odor or breeding bacteria due to long-term storage.

Dust Bin Maintenance:

Attention: The high-efficiency filter and filter cotton cannot be washed with water.

1. Open the faceplate and take out the dust bin.
2. Dumping of garbage.
3. Remove the filter bracket, and then take out the high-efficiency filter and filter cotton.
4. Clean the high-efficiency filter and filter cotton with a cleaning brush. Do not wash them with water.
5. The main body of the dust box and the filter bracket can be washed with water. Rinse and allow to dry completely for at least 24 hours before returning to use.

Side Brushes Maintenance:

Pull the side brushes off forcefully. After cleaning the side brushes, reinstall them. Replace the side brushes with new ones based on wear and tear.

Main Unit Sensor Cleaning:

Use a soft dry cloth to wipe and clean the robot's components, including:

1. Front obstacle sensor
2. ToF sensor
3. Drop prevention sensor (It is recommended to clean the drop prevention sensor once a week to prevent dust from blocking and affecting the signal)

Charging Dock Cleaning:

1. Clean the charging electrode of the docking station to ensure smooth charging.
2. Clean the infrared signal sensor lens of the docking station to avoid signal interference.

6. Technical Specifications

Adapter Models:

K30-V1000R190-019A0-US (AD-0121900060US), K30-V1000R190-019AO-DE (AD-0121900060EU), K30-V1000R190-019A0-GB (AD-0121900060UK), K30-V1000R190-019A0-AU (AD-0121900060AU), V30-V0600R190-012AA0-US (AD-0191900100US), V30-V0600R190-012AA0-DE (AD-0191900100EU), V30-V0600R190-012AA0-GB (AD-0191900100UK), V30-V0600R190-012AA0-AU (AD-0191900100AU), CZH015190060RSWP (CZH024190100BRWM), CZH015190095IDWH (CZH024190100KRWM)

Environmental Protection Instructions (Battery Removal):

The chemicals contained in the lithium-ion battery built into this product may pollute the environment. Before disposal, remove the battery and dispose of it at a designated battery recycling facility.

Battery Removal Steps:

1. Let the robot run until it fully discharges and shuts down automatically without being connected to the charging dock.
2. Make sure the robot is powered off.
3. Remove the screws that secure the battery cover on the bottom shell of the robot.
4. Open the battery cover.
5. After taking out the battery, unplug the connector from the battery.

Tip:

• When disassembling the battery, make sure it is fully discharged and work without connecting it to the charging dock.
• Please remove the entire battery pack as a whole. Avoid damaging the battery pack casing to prevent short-circuits or the leakage of hazardous substances.
• In case the battery leaks and you come into accidental contact with it, rinse thoroughly with plenty of water and seek medical attention immediately.

7. Troubleshooting

Exception Alarm Prompt:

When the robot runs into trouble, its red indicator light will be on or flash and an error message will be broadcast. The following table summarizes the corresponding causes:

* If the above method cannot resolve the problem, please try the following operations: power on the ON/OFF button on the side to restart the robot.

General Troubleshooting:

If the following problems occur, users can resolve them independently by comparison and inquiry:

* If the issue cannot be eliminated according to the operation in the table, contact our customer service representative.

8. User Tips

• Optimal Placement: The compact 28cm size of the M330 Pro allows it to effortlessly navigate tight spaces, including under dining tables and nightstands, ensuring thorough cleaning without getting stuck.
• Carpet Care: When using the mopping function, the robot intelligently avoids carpets. In vacuum mode, it automatically boosts suction on carpets for a deeper clean.
• Pet-Friendly Zones: Utilize the 'No-Go Zones' feature in the app to prevent the robot from entering areas like pet feeding stations or litter boxes, keeping those spaces undisturbed.
• Continuous Cleaning: Thanks to its 'Auto-Resume Tech', the robot will return to its charging dock when the battery is low, recharge, and then continue cleaning from where it left off, ensuring complete coverage.
• Customized Cleaning: Use the 'Smart Custom Mode' in the app to adjust suction power and cleaning frequency for different rooms, tailoring the cleaning process to your specific needs.
• Easy Dustbin Monitoring: The 450ml see-through dustbin allows you to easily check the debris level at a glance, making it simple to know when it's time to empty.
• Multi-Language Manuals: If you need the user manual in a language other than English, scan the QR code on the cover to access online versions in German, French, Italian, Spanish, and Japanese.

9. Warranty and Support

Warranty Information:

This warranty covers the repair or replacement of the malfunction device at our company's discretion for a period of 1-year. This certificate is void if altered. The serial number must be provided as well as all accessories to be eligible for warranty coverage.

Exclusions: Unless agreed in writing, the warranty will not apply if the defects relate to:

• Consumable parts such as filters, or brushes etc, that are subject to normal wear and tear, and require regular maintenance and/or replacement to ensure the proper functioning of your unit.
• Defects caused by rough or inappropriate handling or use or damage caused by accident, misuse, neglect, fire, water, lighting or other acts of nature, external sources such as weather, electrical outages or power surges.
• Improper operation or maintenance, use not in accordance with the product instructions or connection to improper voltage supply.
• Accident, abuse, misapplication, or any unauthorized repair, modification, or disassembly of the product.
• Any failure to adequately package the product for transportation.
• Use of parts not in accordance with the product instructions.
• Use of parts and accessories other than those produced or recommended by our company.
• Use in a commercial environment as the product is designed for residential use only.
• Consequential and incidental damages.
• Any product(s) purchased from unauthorized dealers/resellers.
• Products used outside the country of purchase.
• Lost and/or stolen products.

Customer Support:

If you encounter situations not properly addressed in this user manual, please contact our after-sales service. We'll solve your specific problems.

For more information, please visit the official website of Lefant ROBOTICS: www.lefant.com

You can also send an email to the following addresses:

• North America: support.us@lefant.com
• Europe: support.eu@lefant.com
• Other countries: support@lefant.com

Join our community on Facebook: facebook.com/groups/Lefantofficalcommunity